! Started logfile: J0801-2831_S_2004_04_30_yyk_uvs.log on Wed Dec 7 01:10:27 2005 obs J0801-2831_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0801-2831_S_2004_04_30_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.605556 visibilities/baseline/integration-bin. ! Found source: J0801-2831 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1628 lines of history. ! ! Reading 872 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0801-2831_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.183759 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.850839Jy sigma=13.158162 ! Fit after self-cal, rms=0.843042Jy sigma=13.114074 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.899 mas, bmaj=15.88 mas, bpa=12.79 degrees ! Estimated noise=3.98898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.126588 Jy ! Component: 100 - total flux cleaned = 0.161255 Jy ! Total flux subtracted in 100 components = 0.161255 Jy ! Clean residual min=-0.013682 max=0.015377 Jy/beam ! Clean residual mean=-0.000033 rms=0.004176 Jy/beam ! Combined flux in latest and established models = 0.161255 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.161255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085042Jy sigma=1.101217 ! Fit after self-cal, rms=0.085050Jy sigma=1.100778 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.574 mas, bmaj=26.41 mas, bpa=5.107 degrees ! Estimated noise=1.75123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190168 Jy ! Component: 100 - total flux cleaned = 0.0261494 Jy ! Component: 150 - total flux cleaned = 0.0296672 Jy ! Component: 200 - total flux cleaned = 0.0314624 Jy ! Total flux subtracted in 200 components = 0.0314624 Jy ! Clean residual min=-0.009192 max=0.008814 Jy/beam ! Clean residual mean=-0.000142 rms=0.002801 Jy/beam ! Combined flux in latest and established models = 0.192718 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 46 components and 0.192718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082517Jy sigma=1.047416 ! Fit after self-cal, rms=0.082447Jy sigma=1.047255 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02723 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.84 KP 1.00 ! LA 1.10 MK 1.00* NL 1.01 OV 0.98 ! PT 0.88 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.082447Jy sigma=1.047255 ! Fit after self-cal, rms=0.081782Jy sigma=1.041044 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081782Jy sigma=1.041044 ! Fit after self-cal, rms=0.081787Jy sigma=1.041032 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.465 mas, bmaj=26.33 mas, bpa=5.151 degrees ! Estimated noise=1.75655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242727 Jy ! Component: 100 - total flux cleaned = 0.00311506 Jy ! Component: 150 - total flux cleaned = 0.00338462 Jy ! Component: 200 - total flux cleaned = 0.00358748 Jy ! Total flux subtracted in 200 components = 0.00358748 Jy ! Clean residual min=-0.007905 max=0.007965 Jy/beam ! Clean residual mean=-0.000128 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.196305 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.196305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081814Jy sigma=1.039947 ! Fit after self-cal, rms=0.081790Jy sigma=1.039925 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081790Jy sigma=1.039925 ! Fit after self-cal, rms=0.073576Jy sigma=0.969059 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189997 Jy ! Component: 100 - total flux cleaned = 0.00217347 Jy ! Component: 150 - total flux cleaned = 0.0021488 Jy ! Component: 200 - total flux cleaned = 0.0021497 Jy ! Total flux subtracted in 200 components = 0.0021497 Jy ! Clean residual min=-0.007275 max=0.008088 Jy/beam ! Clean residual mean=-0.000138 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 0.198455 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.198455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073459Jy sigma=0.968392 ! Fit after self-cal, rms=0.072484Jy sigma=0.962373 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.465 x 26.33 at 5.151 degrees (North through East) ! Clean map min=-0.0069138 max=0.16154 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072484Jy sigma=0.962373 ! Fit after self-cal, rms=0.070664Jy sigma=0.951894 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070664Jy sigma=0.951894 ! Fit after self-cal, rms=0.070487Jy sigma=0.951070 ! Inverting map and beam ! Estimated beam: bmin=7.506 mas, bmaj=26.46 mas, bpa=5.187 degrees ! Estimated noise=1.72672 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00273713 Jy ! Component: 100 - total flux cleaned = -0.00343043 Jy ! Component: 150 - total flux cleaned = -0.00345342 Jy ! Component: 200 - total flux cleaned = -0.00347552 Jy ! Total flux subtracted in 200 components = -0.00347552 Jy ! Clean residual min=-0.006573 max=0.006624 Jy/beam ! Clean residual mean=-0.000104 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.194979 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.194979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070542Jy sigma=0.949768 ! Fit after self-cal, rms=0.070502Jy sigma=0.949616 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070502Jy sigma=0.949616 ! Fit after self-cal, rms=0.066321Jy sigma=0.927581 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066321Jy sigma=0.927581 ! Fit after self-cal, rms=0.066312Jy sigma=0.927368 ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=26.64 mas, bpa=4.843 degrees ! Estimated noise=1.65973 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00482596 Jy ! Component: 100 - total flux cleaned = -0.00564566 Jy ! Component: 150 - total flux cleaned = -0.00570876 Jy ! Component: 200 - total flux cleaned = -0.00568461 Jy ! Total flux subtracted in 200 components = -0.00568461 Jy ! Clean residual min=-0.006201 max=0.005519 Jy/beam ! Clean residual mean=-0.000089 rms=0.001973 Jy/beam ! Combined flux in latest and established models = 0.189295 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.189295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066285Jy sigma=0.922670 ! Fit after self-cal, rms=0.066281Jy sigma=0.922639 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.851 mas, bmaj=30.15 mas, bpa=4.518 degrees ! Estimated noise=1.71853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602139 Jy ! Component: 100 - total flux cleaned = 0.000680674 Jy ! Component: 150 - total flux cleaned = 0.000773966 Jy ! Component: 200 - total flux cleaned = 0.000877736 Jy ! Total flux subtracted in 200 components = 0.000877736 Jy ! Clean residual min=-0.005675 max=0.005341 Jy/beam ! Clean residual mean=-0.000116 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.190173 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 70 components and 0.190173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066282Jy sigma=0.922574 ! Fit after self-cal, rms=0.066275Jy sigma=0.922543 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.899 mas, bmaj=15.95 mas, bpa=11.92 degrees ! Estimated noise=3.69886 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.120573 Jy ! Component: 100 - total flux cleaned = 0.154785 Jy ! Component: 150 - total flux cleaned = 0.170077 Jy ! Component: 200 - total flux cleaned = 0.177741 Jy ! Total flux subtracted in 200 components = 0.177741 Jy ! Clean residual min=-0.011049 max=0.010711 Jy/beam ! Clean residual mean=0.000007 rms=0.002972 Jy/beam ! Combined flux in latest and established models = 0.177741 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.177741 Jy ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=26.64 mas, bpa=4.843 degrees ! Estimated noise=1.65973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00630125 Jy ! Component: 100 - total flux cleaned = 0.00882945 Jy ! Component: 150 - total flux cleaned = 0.00975503 Jy ! Component: 200 - total flux cleaned = 0.0100382 Jy ! Total flux subtracted in 200 components = 0.0100382 Jy ! Clean residual min=-0.006210 max=0.005689 Jy/beam ! Clean residual mean=-0.000086 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 0.187779 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.187779 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.851 mas, bmaj=30.15 mas, bpa=4.518 degrees ! Estimated noise=1.71853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108468 Jy ! Component: 100 - total flux cleaned = 0.00129606 Jy ! Component: 150 - total flux cleaned = 0.0014821 Jy ! Component: 200 - total flux cleaned = 0.00164768 Jy ! Total flux subtracted in 200 components = 0.00164768 Jy ! Clean residual min=-0.005847 max=0.005365 Jy/beam ! Clean residual mean=-0.000113 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 0.189427 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.189427 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=26.64 mas, bpa=4.843 degrees ! Estimated noise=1.65973 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000448479 Jy ! Component: 100 - total flux cleaned = -0.000508853 Jy ! Component: 150 - total flux cleaned = -0.000562142 Jy ! Component: 200 - total flux cleaned = -0.000563185 Jy ! Total flux subtracted in 200 components = -0.000563185 Jy ! Clean residual min=-0.006203 max=0.005622 Jy/beam ! Clean residual mean=-0.000089 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.188864 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.188864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066322Jy sigma=0.923986 ! Fit after self-cal, rms=0.066316Jy sigma=0.923934 wmodel J0801-2831_S_2004_04_30_yyk\_map.mod ! Writing 62 model components to file: J0801-2831_S_2004_04_30_yyk_map.mod wobs J0801-2831_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0801-2831_S_2004_04_30_yyk_uvs.fits wwins J0801-2831_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0801-2831_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016526 Jy ! Component: 100 - total flux cleaned = -0.00275178 Jy ! Component: 150 - total flux cleaned = -0.00392084 Jy ! Component: 200 - total flux cleaned = -0.00462702 Jy ! Component: 250 - total flux cleaned = -0.00492882 Jy ! Component: 300 - total flux cleaned = -0.00521914 Jy ! Component: 350 - total flux cleaned = -0.00563685 Jy ! Component: 400 - total flux cleaned = -0.00570353 Jy ! Component: 450 - total flux cleaned = -0.00570126 Jy ! Component: 500 - total flux cleaned = -0.00563613 Jy ! Component: 550 - total flux cleaned = -0.00563545 Jy ! Component: 600 - total flux cleaned = -0.00557578 Jy ! Component: 650 - total flux cleaned = -0.00569227 Jy ! Component: 700 - total flux cleaned = -0.00557702 Jy ! Component: 750 - total flux cleaned = -0.00568852 Jy ! Component: 800 - total flux cleaned = -0.00579623 Jy ! Component: 850 - total flux cleaned = -0.00590139 Jy ! Component: 900 - total flux cleaned = -0.00600456 Jy ! Component: 950 - total flux cleaned = -0.00595523 Jy ! Component: 1000 - total flux cleaned = -0.00605516 Jy ! Total flux subtracted in 1024 components = -0.00605563 Jy ! Clean residual min=-0.003463 max=0.002912 Jy/beam ! Clean residual mean=-0.000041 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.182808 Jy keep ! Adding 44 model components to the UV plane model. ! The established model now contains 106 components and 0.182808 Jy ![Exited script file: muppet] wmap "J0801-2831_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.403 x 26.64 at 4.843 degrees (North through East) ! Clean map min=-0.0054627 max=0.15327 Jy/beam ! Writing clean map to FITS file: J0801-2831_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.15327 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00115375 device "J0801-2831_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0801-2831_S_2004_04_30_yyk_map.eps/VPS' loglevs 1*100*3*image_rms/peak_flux ! The new contour levels are: ! -2.25826 2.25826 4.51652 9.03305 18.0661 36.1322 72.2644 print "clev=",int(1*3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.403 x 26.64 at 4.843 degrees (North through East) ! Clean map min=-0.0054627 max=0.15327 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0801-2831_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0801-2831_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0801-2831_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:10:28 2005