! Started logfile: J0741-2647_X_2004_05_08_yyk_uvs.log on Wed Dec 7 00:08:23 2005 obs J0741-2647_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0741-2647_X_2004_05_08_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.446914 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0741-2647 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0741-2647_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.202215 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.855562Jy sigma=12.941491 ! Fit after self-cal, rms=0.849403Jy sigma=12.899019 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9332 mas, bmaj=3.323 mas, bpa=9.345 degrees ! Estimated noise=3.28698 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.129572 Jy ! Component: 100 - total flux cleaned = 0.163133 Jy ! Total flux subtracted in 100 components = 0.163133 Jy ! Clean residual min=-0.013311 max=0.012569 Jy/beam ! Clean residual mean=-0.000020 rms=0.003996 Jy/beam ! Combined flux in latest and established models = 0.163133 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.163133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120998Jy sigma=1.284939 ! Fit after self-cal, rms=0.120957Jy sigma=1.283588 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.132 mas, bmaj=4.248 mas, bpa=10.72 degrees ! Estimated noise=1.93976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219316 Jy ! Component: 100 - total flux cleaned = 0.030998 Jy ! Component: 150 - total flux cleaned = 0.0356784 Jy ! Component: 200 - total flux cleaned = 0.038155 Jy ! Total flux subtracted in 200 components = 0.038155 Jy ! Clean residual min=-0.009920 max=0.009801 Jy/beam ! Clean residual mean=-0.000046 rms=0.002957 Jy/beam ! Combined flux in latest and established models = 0.201288 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.201288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119527Jy sigma=1.224141 ! Fit after self-cal, rms=0.119545Jy sigma=1.223221 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.981754 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.20 HN 1.11 KP 0.89 ! LA 1.02 MK 1.00* NL 0.96 OV 1.01 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.119545Jy sigma=1.223221 ! Fit after self-cal, rms=0.119820Jy sigma=1.216794 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119820Jy sigma=1.216794 ! Fit after self-cal, rms=0.119834Jy sigma=1.216151 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.134 mas, bmaj=4.246 mas, bpa=10.73 degrees ! Estimated noise=1.93817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000617108 Jy ! Component: 100 - total flux cleaned = 0.00093216 Jy ! Component: 150 - total flux cleaned = 0.00124549 Jy ! Component: 200 - total flux cleaned = 0.00144405 Jy ! Total flux subtracted in 200 components = 0.00144405 Jy ! Clean residual min=-0.010225 max=0.009662 Jy/beam ! Clean residual mean=-0.000054 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 0.202732 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.202732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119858Jy sigma=1.215380 ! Fit after self-cal, rms=0.119848Jy sigma=1.214712 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119848Jy sigma=1.214712 ! Fit after self-cal, rms=0.112642Jy sigma=1.080267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390637 Jy ! Component: 100 - total flux cleaned = 0.00437349 Jy ! Component: 150 - total flux cleaned = 0.00451583 Jy ! Component: 200 - total flux cleaned = 0.00455317 Jy ! Total flux subtracted in 200 components = 0.00455317 Jy ! Clean residual min=-0.008609 max=0.009003 Jy/beam ! Clean residual mean=-0.000063 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 0.207285 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.207285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112602Jy sigma=1.077864 ! Fit after self-cal, rms=0.113195Jy sigma=1.068187 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.134 x 4.246 at 10.73 degrees (North through East) ! Clean map min=-0.0078562 max=0.1538 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113195Jy sigma=1.068187 ! Fit after self-cal, rms=0.112122Jy sigma=1.055109 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112122Jy sigma=1.055109 ! Fit after self-cal, rms=0.112521Jy sigma=1.053481 ! Inverting map and beam ! Estimated beam: bmin=1.101 mas, bmaj=4.249 mas, bpa=11.54 degrees ! Estimated noise=1.91984 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.73228e-05 Jy ! Component: 100 - total flux cleaned = 3.81629e-05 Jy ! Component: 150 - total flux cleaned = 0.000135748 Jy ! Component: 200 - total flux cleaned = 0.000173611 Jy ! Total flux subtracted in 200 components = 0.000173611 Jy ! Clean residual min=-0.009004 max=0.007952 Jy/beam ! Clean residual mean=-0.000065 rms=0.002378 Jy/beam ! Combined flux in latest and established models = 0.207459 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.207459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112436Jy sigma=1.052396 ! Fit after self-cal, rms=0.112639Jy sigma=1.052106 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112639Jy sigma=1.052106 ! Fit after self-cal, rms=0.115104Jy sigma=1.058437 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115104Jy sigma=1.058437 ! Fit after self-cal, rms=0.115276Jy sigma=1.058335 ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=4.227 mas, bpa=12.37 degrees ! Estimated noise=1.92042 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151417 Jy ! Component: 100 - total flux cleaned = 0.00134947 Jy ! Component: 150 - total flux cleaned = 0.00122738 Jy ! Component: 200 - total flux cleaned = 0.00125664 Jy ! Total flux subtracted in 200 components = 0.00125664 Jy ! Clean residual min=-0.009075 max=0.008228 Jy/beam ! Clean residual mean=-0.000066 rms=0.002430 Jy/beam ! Combined flux in latest and established models = 0.208716 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 0.208716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115257Jy sigma=1.057204 ! Fit after self-cal, rms=0.115340Jy sigma=1.057123 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.174 mas, bmaj=6.049 mas, bpa=1.466 degrees ! Estimated noise=2.25274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460566 Jy ! Component: 100 - total flux cleaned = 0.000563188 Jy ! Component: 150 - total flux cleaned = 0.0006593 Jy ! Component: 200 - total flux cleaned = 0.000746738 Jy ! Total flux subtracted in 200 components = 0.000746738 Jy ! Clean residual min=-0.010759 max=0.008718 Jy/beam ! Clean residual mean=-0.000103 rms=0.003059 Jy/beam ! Combined flux in latest and established models = 0.209462 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 93 components and 0.209462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115294Jy sigma=1.056916 ! Fit after self-cal, rms=0.115334Jy sigma=1.056763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9119 mas, bmaj=3.297 mas, bpa=10.42 degrees ! Estimated noise=3.26317 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.137113 Jy ! Component: 100 - total flux cleaned = 0.174597 Jy ! Component: 150 - total flux cleaned = 0.190766 Jy ! Component: 200 - total flux cleaned = 0.198832 Jy ! Total flux subtracted in 200 components = 0.198832 Jy ! Clean residual min=-0.010164 max=0.013275 Jy/beam ! Clean residual mean=-0.000023 rms=0.002974 Jy/beam ! Combined flux in latest and established models = 0.198832 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.198832 Jy ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=4.227 mas, bpa=12.37 degrees ! Estimated noise=1.92042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00659914 Jy ! Component: 100 - total flux cleaned = 0.00898256 Jy ! Component: 150 - total flux cleaned = 0.00920223 Jy ! Component: 200 - total flux cleaned = 0.00938084 Jy ! Total flux subtracted in 200 components = 0.00938084 Jy ! Clean residual min=-0.009948 max=0.008303 Jy/beam ! Clean residual mean=-0.000066 rms=0.002480 Jy/beam ! Combined flux in latest and established models = 0.208213 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.208213 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.174 mas, bmaj=6.049 mas, bpa=1.466 degrees ! Estimated noise=2.25274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000980856 Jy ! Component: 100 - total flux cleaned = 0.00107743 Jy ! Component: 150 - total flux cleaned = 0.00116692 Jy ! Component: 200 - total flux cleaned = 0.00125188 Jy ! Total flux subtracted in 200 components = 0.00125188 Jy ! Clean residual min=-0.010681 max=0.008894 Jy/beam ! Clean residual mean=-0.000102 rms=0.003085 Jy/beam ! Combined flux in latest and established models = 0.209464 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.209464 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=4.227 mas, bpa=12.37 degrees ! Estimated noise=1.92042 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000583576 Jy ! Component: 100 - total flux cleaned = -0.000540889 Jy ! Component: 150 - total flux cleaned = -0.000501493 Jy ! Component: 200 - total flux cleaned = -0.000463204 Jy ! Total flux subtracted in 200 components = -0.000463204 Jy ! Clean residual min=-0.009748 max=0.008336 Jy/beam ! Clean residual mean=-0.000065 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 0.209001 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 0.209001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115331Jy sigma=1.058621 ! Fit after self-cal, rms=0.115408Jy sigma=1.058243 wmodel J0741-2647_X_2004_05_08_yyk\_map.mod ! Writing 75 model components to file: J0741-2647_X_2004_05_08_yyk_map.mod wobs J0741-2647_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0741-2647_X_2004_05_08_yyk_uvs.fits wwins J0741-2647_X_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J0741-2647_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204457 Jy ! Component: 100 - total flux cleaned = -0.00313139 Jy ! Component: 150 - total flux cleaned = -0.00300142 Jy ! Component: 200 - total flux cleaned = -0.00321886 Jy ! Component: 250 - total flux cleaned = -0.00353276 Jy ! Component: 300 - total flux cleaned = -0.00382658 Jy ! Component: 350 - total flux cleaned = -0.00392084 Jy ! Component: 400 - total flux cleaned = -0.00392105 Jy ! Component: 450 - total flux cleaned = -0.00366312 Jy ! Component: 500 - total flux cleaned = -0.00358137 Jy ! Component: 550 - total flux cleaned = -0.00334213 Jy ! Component: 600 - total flux cleaned = -0.00311082 Jy ! Component: 650 - total flux cleaned = -0.00288606 Jy ! Component: 700 - total flux cleaned = -0.00274216 Jy ! Component: 750 - total flux cleaned = -0.00274259 Jy ! Component: 800 - total flux cleaned = -0.00260535 Jy ! Component: 850 - total flux cleaned = -0.00253955 Jy ! Component: 900 - total flux cleaned = -0.00247464 Jy ! Component: 950 - total flux cleaned = -0.00241112 Jy ! Component: 1000 - total flux cleaned = -0.00210063 Jy ! Component: 1050 - total flux cleaned = -0.00203965 Jy ! Component: 1100 - total flux cleaned = -0.00203988 Jy ! Component: 1150 - total flux cleaned = -0.00215921 Jy ! Component: 1200 - total flux cleaned = -0.00233428 Jy ! Component: 1250 - total flux cleaned = -0.0024493 Jy ! Component: 1300 - total flux cleaned = -0.00267817 Jy ! Component: 1350 - total flux cleaned = -0.00273539 Jy ! Component: 1400 - total flux cleaned = -0.00307226 Jy ! Component: 1450 - total flux cleaned = -0.00312773 Jy ! Component: 1500 - total flux cleaned = -0.00296221 Jy ! Component: 1550 - total flux cleaned = -0.00301656 Jy ! Component: 1600 - total flux cleaned = -0.00285297 Jy ! Component: 1650 - total flux cleaned = -0.002799 Jy ! Component: 1700 - total flux cleaned = -0.00279905 Jy ! Component: 1750 - total flux cleaned = -0.00279896 Jy ! Component: 1800 - total flux cleaned = -0.0028525 Jy ! Component: 1850 - total flux cleaned = -0.00274541 Jy ! Component: 1900 - total flux cleaned = -0.00274528 Jy ! Component: 1950 - total flux cleaned = -0.00274558 Jy ! Component: 2000 - total flux cleaned = -0.0028515 Jy ! Total flux subtracted in 2048 components = -0.00274559 Jy ! Clean residual min=-0.003252 max=0.002848 Jy/beam ! Clean residual mean=-0.000056 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.206256 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 205 components and 0.206256 Jy ![Exited script file: muppet] wmap "J0741-2647_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.082 x 4.227 at 12.37 degrees (North through East) ! Clean map min=-0.0056534 max=0.14593 Jy/beam ! Writing clean map to FITS file: J0741-2647_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145933 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000988758 device "J0741-2647_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0741-2647_X_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.03263 2.03263 4.06525 8.1305 16.261 32.522 65.044 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.082 x 4.227 at 12.37 degrees (North through East) ! Clean map min=-0.0056534 max=0.14593 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0741-2647_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0741-2647_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0741-2647_X_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:08:27 2005