! Started logfile: J0729-1320_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:07:22 2005 obs J0729-1320_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0729-1320_S_2004_04_30_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.834921 visibilities/baseline/integration-bin. ! Found source: J0729-1320 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1629 lines of history. ! ! Reading 2104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0729-1320_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.168924 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.854169Jy sigma=15.677779 ! Fit after self-cal, rms=0.853787Jy sigma=15.674495 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=10.9 mas, bpa=15.27 degrees ! Estimated noise=1.57315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.127793 Jy ! Component: 100 - total flux cleaned = 0.164531 Jy ! Total flux subtracted in 100 components = 0.164531 Jy ! Clean residual min=-0.006437 max=0.010646 Jy/beam ! Clean residual mean=-0.000049 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.164531 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.164531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067790Jy sigma=1.081388 ! Fit after self-cal, rms=0.067580Jy sigma=1.078963 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.007 mas, bmaj=12.78 mas, bpa=8.314 degrees ! Estimated noise=1.01882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145835 Jy ! Component: 100 - total flux cleaned = 0.0191736 Jy ! Component: 150 - total flux cleaned = 0.0201187 Jy ! Component: 200 - total flux cleaned = 0.0203337 Jy ! Total flux subtracted in 200 components = 0.0203337 Jy ! Clean residual min=-0.004688 max=0.006337 Jy/beam ! Clean residual mean=-0.000164 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.184865 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 38 components and 0.184865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065235Jy sigma=1.037090 ! Fit after self-cal, rms=0.065200Jy sigma=1.036739 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01097 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.89 HN 0.90 KP 0.97 ! LA 0.94 MK 1.00* NL 1.04 OV 1.08 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03413 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 0.91 KP 0.88 ! LA 1.00* MK 1.00* NL 0.96 OV 1.00* ! PT 0.96 SC 1.05 ! ! ! Fit before self-cal, rms=0.065200Jy sigma=1.036739 ! Fit after self-cal, rms=0.063716Jy sigma=1.021246 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063716Jy sigma=1.021246 ! Fit after self-cal, rms=0.063697Jy sigma=1.020811 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.995 mas, bmaj=12.76 mas, bpa=7.606 degrees ! Estimated noise=1.00917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128014 Jy ! Component: 100 - total flux cleaned = -0.00123915 Jy ! Component: 150 - total flux cleaned = -0.00130991 Jy ! Component: 200 - total flux cleaned = -0.00133968 Jy ! Total flux subtracted in 200 components = -0.00133968 Jy ! Clean residual min=-0.004330 max=0.005990 Jy/beam ! Clean residual mean=-0.000134 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.183525 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.183525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063639Jy sigma=1.019798 ! Fit after self-cal, rms=0.063617Jy sigma=1.019403 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063617Jy sigma=1.019403 ! Fit after self-cal, rms=0.058905Jy sigma=0.957923 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047967 Jy ! Component: 100 - total flux cleaned = 0.000335929 Jy ! Component: 150 - total flux cleaned = 0.000283178 Jy ! Component: 200 - total flux cleaned = 0.000234371 Jy ! Total flux subtracted in 200 components = 0.000234371 Jy ! Clean residual min=-0.004047 max=0.005673 Jy/beam ! Clean residual mean=-0.000135 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.18376 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.18376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058819Jy sigma=0.957165 ! Fit after self-cal, rms=0.058447Jy sigma=0.952883 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.995 x 12.76 at 7.606 degrees (North through East) ! Clean map min=-0.0040123 max=0.15196 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058447Jy sigma=0.952883 ! Fit after self-cal, rms=0.056350Jy sigma=0.930524 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056350Jy sigma=0.930524 ! Fit after self-cal, rms=0.056280Jy sigma=0.929942 ! Inverting map and beam ! Estimated beam: bmin=4.881 mas, bmaj=12.54 mas, bpa=7.906 degrees ! Estimated noise=0.989825 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000639015 Jy ! Component: 100 - total flux cleaned = -0.000603785 Jy ! Component: 150 - total flux cleaned = -0.000574119 Jy ! Component: 200 - total flux cleaned = -0.000549097 Jy ! Total flux subtracted in 200 components = -0.000549097 Jy ! Clean residual min=-0.003979 max=0.003485 Jy/beam ! Clean residual mean=-0.000118 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.183211 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.183211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056263Jy sigma=0.928920 ! Fit after self-cal, rms=0.056238Jy sigma=0.928825 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056238Jy sigma=0.928825 ! Fit after self-cal, rms=0.055886Jy sigma=0.921206 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055886Jy sigma=0.921206 ! Fit after self-cal, rms=0.055888Jy sigma=0.921117 ! Inverting map and beam ! Estimated beam: bmin=4.852 mas, bmaj=12.47 mas, bpa=8.429 degrees ! Estimated noise=0.98463 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000600381 Jy ! Component: 100 - total flux cleaned = -0.000657542 Jy ! Component: 150 - total flux cleaned = -0.000704696 Jy ! Component: 200 - total flux cleaned = -0.00076498 Jy ! Total flux subtracted in 200 components = -0.00076498 Jy ! Clean residual min=-0.003705 max=0.003178 Jy/beam ! Clean residual mean=-0.000107 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.182446 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.182446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055876Jy sigma=0.920699 ! Fit after self-cal, rms=0.055873Jy sigma=0.920681 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.26 mas, bmaj=17.34 mas, bpa=-1.085 degrees ! Estimated noise=1.10186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225725 Jy ! Component: 100 - total flux cleaned = -0.000265778 Jy ! Component: 150 - total flux cleaned = -0.000281717 Jy ! Component: 200 - total flux cleaned = -0.000298877 Jy ! Total flux subtracted in 200 components = -0.000298877 Jy ! Clean residual min=-0.004205 max=0.003391 Jy/beam ! Clean residual mean=-0.000165 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.182147 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 89 components and 0.182147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055872Jy sigma=0.920733 ! Fit after self-cal, rms=0.055872Jy sigma=0.920693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=10.77 mas, bpa=15.23 degrees ! Estimated noise=1.51083 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125298 Jy ! Component: 100 - total flux cleaned = 0.162454 Jy ! Component: 150 - total flux cleaned = 0.176774 Jy ! Component: 200 - total flux cleaned = 0.181873 Jy ! Total flux subtracted in 200 components = 0.181873 Jy ! Clean residual min=-0.004544 max=0.004126 Jy/beam ! Clean residual mean=-0.000069 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.181873 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.181873 Jy ! Inverting map and beam ! Estimated beam: bmin=4.852 mas, bmaj=12.47 mas, bpa=8.429 degrees ! Estimated noise=0.98463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016473 Jy ! Component: 100 - total flux cleaned = 0.00165151 Jy ! Component: 150 - total flux cleaned = 0.0015464 Jy ! Component: 200 - total flux cleaned = 0.0014603 Jy ! Total flux subtracted in 200 components = 0.0014603 Jy ! Clean residual min=-0.003639 max=0.003333 Jy/beam ! Clean residual mean=-0.000109 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.183333 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.183333 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.26 mas, bmaj=17.34 mas, bpa=-1.085 degrees ! Estimated noise=1.10186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274143 Jy ! Component: 100 - total flux cleaned = -0.000432186 Jy ! Component: 150 - total flux cleaned = -0.000533547 Jy ! Component: 200 - total flux cleaned = -0.000652601 Jy ! Total flux subtracted in 200 components = -0.000652601 Jy ! Clean residual min=-0.004155 max=0.003473 Jy/beam ! Clean residual mean=-0.000167 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.182681 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.182681 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.852 mas, bmaj=12.47 mas, bpa=8.429 degrees ! Estimated noise=0.98463 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103458 Jy ! Component: 100 - total flux cleaned = 0.000101593 Jy ! Component: 150 - total flux cleaned = 7.8936e-05 Jy ! Component: 200 - total flux cleaned = 5.95182e-05 Jy ! Total flux subtracted in 200 components = 5.95182e-05 Jy ! Clean residual min=-0.003726 max=0.003245 Jy/beam ! Clean residual mean=-0.000107 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.18274 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.18274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055860Jy sigma=0.920669 ! Fit after self-cal, rms=0.055856Jy sigma=0.920633 wmodel J0729-1320_S_2004_04_30_yyk\_map.mod ! Writing 64 model components to file: J0729-1320_S_2004_04_30_yyk_map.mod wobs J0729-1320_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0729-1320_S_2004_04_30_yyk_uvs.fits wwins J0729-1320_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0729-1320_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430484 Jy ! Component: 100 - total flux cleaned = -0.000430648 Jy ! Component: 150 - total flux cleaned = -0.000536684 Jy ! Component: 200 - total flux cleaned = -0.000536788 Jy ! Component: 250 - total flux cleaned = -0.000630398 Jy ! Component: 300 - total flux cleaned = -0.000717528 Jy ! Component: 350 - total flux cleaned = -0.000926082 Jy ! Component: 400 - total flux cleaned = -0.00108551 Jy ! Component: 450 - total flux cleaned = -0.00127796 Jy ! Component: 500 - total flux cleaned = -0.00142681 Jy ! Component: 550 - total flux cleaned = -0.00164255 Jy ! Component: 600 - total flux cleaned = -0.0017816 Jy ! Component: 650 - total flux cleaned = -0.00184997 Jy ! Component: 700 - total flux cleaned = -0.00198227 Jy ! Component: 750 - total flux cleaned = -0.00211138 Jy ! Component: 800 - total flux cleaned = -0.00220594 Jy ! Component: 850 - total flux cleaned = -0.00245257 Jy ! Component: 900 - total flux cleaned = -0.00260318 Jy ! Component: 950 - total flux cleaned = -0.00283909 Jy ! Component: 1000 - total flux cleaned = -0.00295444 Jy ! Component: 1050 - total flux cleaned = -0.00306856 Jy ! Component: 1100 - total flux cleaned = -0.00323582 Jy ! Component: 1150 - total flux cleaned = -0.00323553 Jy ! Component: 1200 - total flux cleaned = -0.00323588 Jy ! Component: 1250 - total flux cleaned = -0.00326228 Jy ! Component: 1300 - total flux cleaned = -0.00318402 Jy ! Component: 1350 - total flux cleaned = -0.00308209 Jy ! Component: 1400 - total flux cleaned = -0.00303214 Jy ! Component: 1450 - total flux cleaned = -0.00295828 Jy ! Component: 1500 - total flux cleaned = -0.00288585 Jy ! Component: 1550 - total flux cleaned = -0.00274323 Jy ! Component: 1600 - total flux cleaned = -0.00260307 Jy ! Component: 1650 - total flux cleaned = -0.00248791 Jy ! Component: 1700 - total flux cleaned = -0.00235169 Jy ! Component: 1750 - total flux cleaned = -0.00223959 Jy ! Component: 1800 - total flux cleaned = -0.00208477 Jy ! Component: 1850 - total flux cleaned = -0.00193213 Jy ! Component: 1900 - total flux cleaned = -0.00178165 Jy ! Component: 1950 - total flux cleaned = -0.00165476 Jy ! Component: 2000 - total flux cleaned = -0.00155015 Jy ! Total flux subtracted in 2048 components = -0.00148805 Jy ! Clean residual min=-0.001364 max=0.001202 Jy/beam ! Clean residual mean=-0.000023 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.181252 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 193 components and 0.181252 Jy ![Exited script file: muppet] wmap "J0729-1320_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.852 x 12.47 at 8.429 degrees (North through East) ! Clean map min=-0.0029712 max=0.14894 Jy/beam ! Writing clean map to FITS file: J0729-1320_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148941 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000445462 device "J0729-1320_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0729-1320_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.897258 0.897258 1.79452 3.58903 7.17807 14.3561 28.7123 57.4245 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.852 x 12.47 at 8.429 degrees (North through East) ! Clean map min=-0.0029712 max=0.14894 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0729-1320_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0729-1320_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0729-1320_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:07:26 2005