! Started logfile: J0711-1359_S_2004_05_08_yyk_uvs.log on Wed Dec  7 01:03:12 2005
obs J0711-1359_S_2004_05_08_yyk_uve.fits
! Reading UV FITS file: J0711-1359_S_2004_05_08_yyk_uve.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.218519 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0711-1359
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1434 lines of history.
! 
! Reading 472 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0711-1359_S_2004_05_08_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.112405 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 120 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.932502Jy  sigma=15.460333
! Fit after  self-cal, rms=0.917422Jy  sigma=15.499239
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.022 mas, bmaj=23.58 mas, bpa=-8.773 degrees
! Estimated noise=4.20287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0745739 Jy
! Component: 100  -  total flux cleaned = 0.0881946 Jy
! Total flux subtracted in 100 components = 0.0881946 Jy
! Clean residual min=-0.010480 max=0.011434 Jy/beam
! Clean residual mean=-0.000177 rms=0.003445 Jy/beam
! Combined flux in latest and established models = 0.0881946 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0881946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073249Jy  sigma=1.060079
! Fit after  self-cal, rms=0.073272Jy  sigma=1.058523
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.177 mas, bmaj=21.95 mas, bpa=-4.27 degrees
! Estimated noise=3.01448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00421399 Jy
! Component: 100  -  total flux cleaned = 0.00172609 Jy
! Component: 150  -  total flux cleaned = -0.000596447 Jy
! Component: 200  -  total flux cleaned = -0.00158812 Jy
! Total flux subtracted in 200 components = -0.00158812 Jy
! Clean residual min=-0.004411 max=0.005302 Jy/beam
! Clean residual mean=-0.000042 rms=0.001635 Jy/beam
! Combined flux in latest and established models = 0.0866065 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 35 components and 0.0866065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072723Jy  sigma=1.038138
! Fit after  self-cal, rms=0.072672Jy  sigma=1.037313
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.02036
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.03     HN        0.88     KP        1.07     
!   LA        1.00*    MK        1.00*    NL        0.89     OV        0.93     
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.991708
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00     HN        1.00*    KP        1.01     
!   LA        1.06     MK        1.00*    NL        0.98     OV        1.02     
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.072672Jy  sigma=1.037313
! Fit after  self-cal, rms=0.072174Jy  sigma=1.036927
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072174Jy  sigma=1.036927
! Fit after  self-cal, rms=0.071980Jy  sigma=1.035468
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.76 mas, bmaj=21.68 mas, bpa=-4.772 degrees
! Estimated noise=3.04806 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00304227 Jy
! Component: 100  -  total flux cleaned = 0.00279376 Jy
! Component: 150  -  total flux cleaned = 0.00294072 Jy
! Component: 200  -  total flux cleaned = 0.00320144 Jy
! Total flux subtracted in 200 components = 0.00320144 Jy
! Clean residual min=-0.005016 max=0.004715 Jy/beam
! Clean residual mean=-0.000027 rms=0.001452 Jy/beam
! Combined flux in latest and established models = 0.0898079 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 45 components and 0.0898079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071799Jy  sigma=1.031872
! Fit after  self-cal, rms=0.071819Jy  sigma=1.031509
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071819Jy  sigma=1.031509
! Fit after  self-cal, rms=0.064318Jy  sigma=0.902768
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501822 Jy
! Component: 100  -  total flux cleaned = 0.00805333 Jy
! Component: 150  -  total flux cleaned = 0.010281 Jy
! Component: 200  -  total flux cleaned = 0.0115991 Jy
! Total flux subtracted in 200 components = 0.0115991 Jy
! Clean residual min=-0.005471 max=0.003934 Jy/beam
! Clean residual mean=-0.000001 rms=0.001363 Jy/beam
! Combined flux in latest and established models = 0.101407 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 70 components and 0.101407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064211Jy  sigma=0.895713
! Fit after  self-cal, rms=0.063296Jy  sigma=0.884242
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.76 x 21.68 at -4.772 degrees (North through East)
! Clean map  min=-0.0055174  max=0.091171 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.483 mas, bmaj=21.97 mas, bpa=-1.847 degrees
! Estimated noise=3.17486 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017589 Jy
! Component: 100  -  total flux cleaned = 0.0024336 Jy
! Component: 150  -  total flux cleaned = 0.00295305 Jy
! Component: 200  -  total flux cleaned = 0.00328371 Jy
! Total flux subtracted in 200 components = 0.00328371 Jy
! Clean residual min=-0.004995 max=0.004381 Jy/beam
! Clean residual mean=0.000025 rms=0.001377 Jy/beam
! Combined flux in latest and established models = 0.104691 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 85 components and 0.104691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063294Jy  sigma=0.882898
! Fit after  self-cal, rms=0.063155Jy  sigma=0.881678
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.855 mas, bmaj=23.52 mas, bpa=-8.652 degrees
! Estimated noise=4.28062 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0797119 Jy
! Component: 100  -  total flux cleaned = 0.0975344 Jy
! Component: 150  -  total flux cleaned = 0.102378 Jy
! Component: 200  -  total flux cleaned = 0.103548 Jy
! Total flux subtracted in 200 components = 0.103548 Jy
! Clean residual min=-0.006829 max=0.007070 Jy/beam
! Clean residual mean=-0.000018 rms=0.002411 Jy/beam
! Combined flux in latest and established models = 0.103548 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.103548 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.76 mas, bmaj=21.68 mas, bpa=-4.772 degrees
! Estimated noise=3.04806 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00382767 Jy
! Component: 100  -  total flux cleaned = 0.00344299 Jy
! Component: 150  -  total flux cleaned = 0.00288198 Jy
! Component: 200  -  total flux cleaned = 0.00281938 Jy
! Total flux subtracted in 200 components = 0.00281938 Jy
! Clean residual min=-0.005023 max=0.004366 Jy/beam
! Clean residual mean=0.000019 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 0.106367 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 34 components and 0.106367 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.483 mas, bmaj=21.97 mas, bpa=-1.847 degrees
! Estimated noise=3.17486 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000347345 Jy
! Component: 100  -  total flux cleaned = -0.000625196 Jy
! Component: 150  -  total flux cleaned = -0.000870471 Jy
! Component: 200  -  total flux cleaned = -0.000963997 Jy
! Total flux subtracted in 200 components = -0.000963997 Jy
! Clean residual min=-0.004623 max=0.004244 Jy/beam
! Clean residual mean=0.000031 rms=0.001364 Jy/beam
! Combined flux in latest and established models = 0.105403 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.105403 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.76 mas, bmaj=21.68 mas, bpa=-4.772 degrees
! Estimated noise=3.04806 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00084368 Jy
! Component: 100  -  total flux cleaned = 0.00115207 Jy
! Component: 150  -  total flux cleaned = 0.00127063 Jy
! Component: 200  -  total flux cleaned = 0.0012318 Jy
! Total flux subtracted in 200 components = 0.0012318 Jy
! Clean residual min=-0.005024 max=0.004277 Jy/beam
! Clean residual mean=0.000016 rms=0.001347 Jy/beam
! Combined flux in latest and established models = 0.106635 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 56 components and 0.106635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063143Jy  sigma=0.880076
! Fit after  self-cal, rms=0.063045Jy  sigma=0.879274
wmodel J0711-1359_S_2004_05_08_yyk\_map.mod
! Writing 56 model components to file: J0711-1359_S_2004_05_08_yyk_map.mod
wobs J0711-1359_S_2004_05_08_yyk\_uvs.fits
! Writing UV FITS file: J0711-1359_S_2004_05_08_yyk_uvs.fits
wwins J0711-1359_S_2004_05_08_yyk\_map.win
! wwins: Wrote 1 windows to J0711-1359_S_2004_05_08_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00115958 Jy
! Component: 100  -  total flux cleaned = -0.000762699 Jy
! Component: 150  -  total flux cleaned = -0.000472632 Jy
! Component: 200  -  total flux cleaned = -0.000304961 Jy
! Component: 250  -  total flux cleaned = -0.000201025 Jy
! Component: 300  -  total flux cleaned = -0.000151775 Jy
! Component: 350  -  total flux cleaned = -5.63344e-05 Jy
! Component: 400  -  total flux cleaned = 8.07639e-05 Jy
! Component: 450  -  total flux cleaned = 0.00025787 Jy
! Component: 500  -  total flux cleaned = 0.000386583 Jy
! Component: 550  -  total flux cleaned = 0.00046928 Jy
! Component: 600  -  total flux cleaned = 0.000508802 Jy
! Component: 650  -  total flux cleaned = 0.000702592 Jy
! Component: 700  -  total flux cleaned = 0.000854471 Jy
! Component: 750  -  total flux cleaned = 0.00107707 Jy
! Component: 800  -  total flux cleaned = 0.00125745 Jy
! Component: 850  -  total flux cleaned = 0.00146906 Jy
! Component: 900  -  total flux cleaned = 0.00170877 Jy
! Component: 950  -  total flux cleaned = 0.00167524 Jy
! Component: 1000  -  total flux cleaned = 0.00174092 Jy
! Total flux subtracted in 1024 components = 0.00170886 Jy
! Clean residual min=-0.002691 max=0.001768 Jy/beam
! Clean residual mean=0.000018 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.108344 Jy
keep
! Adding 50 model components to the UV plane model.
! The established model now contains 106 components and 0.108344 Jy
![Exited script file: muppet]
wmap "J0711-1359_S_2004_05_08_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.76 x 21.68 at -4.772 degrees (North through East)
! Clean map  min=-0.0044833  max=0.090943 Jy/beam
! Writing clean map to FITS file: J0711-1359_S_2004_05_08_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0909429 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000696971 
device "J0711-1359_S_2004_05_08_yyk\_map.eps/VPS"
! Attempting to open device: 'J0711-1359_S_2004_05_08_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.29915 2.29915 4.5983 9.1966 18.3932 36.7864 73.5728
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.002 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.09 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.76 x 21.68 at -4.772 degrees (North through East)
! Clean map  min=-0.0044833  max=0.090943 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0711-1359_S_2004_05_08_yyk\_map.gif/gif"
! Attempting to open device: 'J0711-1359_S_2004_05_08_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0711-1359_S_2004_05_08_yyk_uvs.log closed on Wed Dec  7 01:03:13 2005