! Started logfile: J0655-2416_X_2004_05_27_yyk_uvs.log on Wed Dec 7 00:05:31 2005 obs J0655-2416_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0655-2416_X_2004_05_27_yyk_uve.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.918954 visibilities/baseline/integration-bin. ! Found source: J0655-2416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 2812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0655-2416_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.144957 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.873842Jy sigma=16.326808 ! Fit after self-cal, rms=0.873719Jy sigma=16.324952 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6461 mas, bmaj=1.659 mas, bpa=1.672 degrees ! Estimated noise=1.22318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.108188 Jy ! Component: 100 - total flux cleaned = 0.124437 Jy ! Total flux subtracted in 100 components = 0.124437 Jy ! Clean residual min=-0.005002 max=0.005561 Jy/beam ! Clean residual mean=-0.000015 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.124437 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.124437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066468Jy sigma=1.045453 ! Fit after self-cal, rms=0.066461Jy sigma=1.045104 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8547 mas, bmaj=2.131 mas, bpa=2.327 degrees ! Estimated noise=0.768693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00809997 Jy ! Component: 100 - total flux cleaned = 0.0105281 Jy ! Component: 150 - total flux cleaned = 0.0113038 Jy ! Component: 200 - total flux cleaned = 0.0113918 Jy ! Total flux subtracted in 200 components = 0.0113918 Jy ! Clean residual min=-0.003841 max=0.002837 Jy/beam ! Clean residual mean=-0.000010 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.135829 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.135829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065881Jy sigma=1.031526 ! Fit after self-cal, rms=0.065870Jy sigma=1.031329 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01048 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 1.00* KP 0.97 ! LA 0.98 MK 0.95 NL 1.01 OV 1.01 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00625 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 1.00* KP 0.90 ! LA 0.96 MK 1.02 NL 1.02 OV 0.97 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992812 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 1.00* KP 0.87 ! LA 0.94 MK 1.06 NL 0.99 OV 1.08 ! PT 1.07 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974475 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.00* KP 0.92 ! LA 1.00 MK 1.00 NL 1.02 OV 1.09 ! PT 1.10 SC 1.03 ! ! ! Fit before self-cal, rms=0.065870Jy sigma=1.031329 ! Fit after self-cal, rms=0.065782Jy sigma=1.017620 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065782Jy sigma=1.017620 ! Fit after self-cal, rms=0.065778Jy sigma=1.017432 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8549 mas, bmaj=2.142 mas, bpa=2.472 degrees ! Estimated noise=0.764287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523194 Jy ! Component: 100 - total flux cleaned = -0.000523062 Jy ! Component: 150 - total flux cleaned = -0.000536057 Jy ! Component: 200 - total flux cleaned = -0.000547602 Jy ! Total flux subtracted in 200 components = -0.000547602 Jy ! Clean residual min=-0.002586 max=0.002714 Jy/beam ! Clean residual mean=-0.000006 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.135282 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.135282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065771Jy sigma=1.017312 ! Fit after self-cal, rms=0.065762Jy sigma=1.017161 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065762Jy sigma=1.017161 ! Fit after self-cal, rms=0.063370Jy sigma=0.972045 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860392 Jy ! Component: 100 - total flux cleaned = 0.000864701 Jy ! Component: 150 - total flux cleaned = 0.000851157 Jy ! Component: 200 - total flux cleaned = 0.000838645 Jy ! Total flux subtracted in 200 components = 0.000838645 Jy ! Clean residual min=-0.002590 max=0.002575 Jy/beam ! Clean residual mean=-0.000006 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.13612 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.13612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063351Jy sigma=0.971797 ! Fit after self-cal, rms=0.063239Jy sigma=0.968889 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8549 x 2.142 at 2.472 degrees (North through East) ! Clean map min=-0.0023655 max=0.12936 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063239Jy sigma=0.968889 ! Fit after self-cal, rms=0.063834Jy sigma=0.962486 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063834Jy sigma=0.962486 ! Fit after self-cal, rms=0.063846Jy sigma=0.962184 ! Inverting map and beam ! Estimated beam: bmin=0.8538 mas, bmaj=2.165 mas, bpa=2.422 degrees ! Estimated noise=0.764735 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.75956e-05 Jy ! Component: 100 - total flux cleaned = 0.000120968 Jy ! Component: 150 - total flux cleaned = 0.000139744 Jy ! Component: 200 - total flux cleaned = 0.000139971 Jy ! Total flux subtracted in 200 components = 0.000139971 Jy ! Clean residual min=-0.002490 max=0.002537 Jy/beam ! Clean residual mean=-0.000003 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.13626 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.13626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063825Jy sigma=0.961971 ! Fit after self-cal, rms=0.063833Jy sigma=0.961933 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063833Jy sigma=0.961933 ! Fit after self-cal, rms=0.064891Jy sigma=0.956730 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064891Jy sigma=0.956730 ! Fit after self-cal, rms=0.064911Jy sigma=0.956619 ! Inverting map and beam ! Estimated beam: bmin=0.8483 mas, bmaj=2.147 mas, bpa=3.111 degrees ! Estimated noise=0.762774 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618279 Jy ! Component: 100 - total flux cleaned = 0.000643393 Jy ! Component: 150 - total flux cleaned = 0.000644513 Jy ! Component: 200 - total flux cleaned = 0.000645824 Jy ! Total flux subtracted in 200 components = 0.000645824 Jy ! Clean residual min=-0.002507 max=0.002676 Jy/beam ! Clean residual mean=-0.000009 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.136906 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.136906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064894Jy sigma=0.956275 ! Fit after self-cal, rms=0.064900Jy sigma=0.956265 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.523 mas, bmaj=6.037 mas, bpa=6.903 degrees ! Estimated noise=0.977064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234581 Jy ! Component: 100 - total flux cleaned = 0.000252843 Jy ! Component: 150 - total flux cleaned = 0.000270212 Jy ! Component: 200 - total flux cleaned = 0.000286279 Jy ! Total flux subtracted in 200 components = 0.000286279 Jy ! Clean residual min=-0.002612 max=0.002319 Jy/beam ! Clean residual mean=-0.000016 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.137192 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 41 components and 0.137192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064904Jy sigma=0.956273 ! Fit after self-cal, rms=0.064907Jy sigma=0.956270 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6442 mas, bmaj=1.668 mas, bpa=1.96 degrees ! Estimated noise=1.22194 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.108873 Jy ! Component: 100 - total flux cleaned = 0.125856 Jy ! Component: 150 - total flux cleaned = 0.131807 Jy ! Component: 200 - total flux cleaned = 0.134743 Jy ! Total flux subtracted in 200 components = 0.134743 Jy ! Clean residual min=-0.004210 max=0.005292 Jy/beam ! Clean residual mean=-0.000004 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.134743 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.134743 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8483 mas, bmaj=2.147 mas, bpa=3.111 degrees ! Estimated noise=0.762774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210204 Jy ! Component: 100 - total flux cleaned = 0.00227877 Jy ! Component: 150 - total flux cleaned = 0.00230652 Jy ! Component: 200 - total flux cleaned = 0.00233935 Jy ! Total flux subtracted in 200 components = 0.00233935 Jy ! Clean residual min=-0.002418 max=0.002700 Jy/beam ! Clean residual mean=-0.000008 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.137083 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.137083 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.523 mas, bmaj=6.037 mas, bpa=6.903 degrees ! Estimated noise=0.977064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197754 Jy ! Component: 100 - total flux cleaned = 0.000205438 Jy ! Component: 150 - total flux cleaned = 0.000220739 Jy ! Component: 200 - total flux cleaned = 0.000234758 Jy ! Total flux subtracted in 200 components = 0.000234758 Jy ! Clean residual min=-0.002605 max=0.002316 Jy/beam ! Clean residual mean=-0.000015 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.137317 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 32 components and 0.137317 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8483 mas, bmaj=2.147 mas, bpa=3.111 degrees ! Estimated noise=0.762774 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217068 Jy ! Component: 100 - total flux cleaned = -0.000226556 Jy ! Component: 150 - total flux cleaned = -0.000225844 Jy ! Component: 200 - total flux cleaned = -0.000225105 Jy ! Total flux subtracted in 200 components = -0.000225105 Jy ! Clean residual min=-0.002411 max=0.002698 Jy/beam ! Clean residual mean=-0.000008 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.137092 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.137092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064893Jy sigma=0.956231 ! Fit after self-cal, rms=0.064897Jy sigma=0.956217 wmodel J0655-2416_X_2004_05_27_yyk\_map.mod ! Writing 36 model components to file: J0655-2416_X_2004_05_27_yyk_map.mod wobs J0655-2416_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0655-2416_X_2004_05_27_yyk_uvs.fits wwins J0655-2416_X_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J0655-2416_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352286 Jy ! Component: 100 - total flux cleaned = 0.000267383 Jy ! Component: 150 - total flux cleaned = 0.000226327 Jy ! Component: 200 - total flux cleaned = 6.85531e-05 Jy ! Component: 250 - total flux cleaned = -0.000120119 Jy ! Component: 300 - total flux cleaned = -0.000410284 Jy ! Component: 350 - total flux cleaned = -0.00055119 Jy ! Component: 400 - total flux cleaned = -0.000550585 Jy ! Component: 450 - total flux cleaned = -0.000551085 Jy ! Component: 500 - total flux cleaned = -0.000583019 Jy ! Component: 550 - total flux cleaned = -0.000582551 Jy ! Component: 600 - total flux cleaned = -0.00067402 Jy ! Component: 650 - total flux cleaned = -0.000613748 Jy ! Component: 700 - total flux cleaned = -0.00055503 Jy ! Component: 750 - total flux cleaned = -0.000554863 Jy ! Component: 800 - total flux cleaned = -0.000471171 Jy ! Component: 850 - total flux cleaned = -0.000471215 Jy ! Component: 900 - total flux cleaned = -0.00047057 Jy ! Component: 950 - total flux cleaned = -0.000443563 Jy ! Component: 1000 - total flux cleaned = -0.000469281 Jy ! Component: 1050 - total flux cleaned = -0.000545396 Jy ! Component: 1100 - total flux cleaned = -0.00054547 Jy ! Component: 1150 - total flux cleaned = -0.000594787 Jy ! Component: 1200 - total flux cleaned = -0.000642636 Jy ! Component: 1250 - total flux cleaned = -0.000690152 Jy ! Component: 1300 - total flux cleaned = -0.000689678 Jy ! Component: 1350 - total flux cleaned = -0.000689534 Jy ! Component: 1400 - total flux cleaned = -0.000712362 Jy ! Component: 1450 - total flux cleaned = -0.000712304 Jy ! Component: 1500 - total flux cleaned = -0.000690011 Jy ! Component: 1550 - total flux cleaned = -0.000624392 Jy ! Component: 1600 - total flux cleaned = -0.000582098 Jy ! Component: 1650 - total flux cleaned = -0.000582684 Jy ! Component: 1700 - total flux cleaned = -0.000645193 Jy ! Component: 1750 - total flux cleaned = -0.000583195 Jy ! Component: 1800 - total flux cleaned = -0.000603818 Jy ! Component: 1850 - total flux cleaned = -0.000603489 Jy ! Component: 1900 - total flux cleaned = -0.000583709 Jy ! Component: 1950 - total flux cleaned = -0.000623253 Jy ! Component: 2000 - total flux cleaned = -0.00064293 Jy ! Total flux subtracted in 2048 components = -0.000642859 Jy ! Clean residual min=-0.001111 max=0.000958 Jy/beam ! Clean residual mean=-0.000007 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.13645 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 160 components and 0.13645 Jy ![Exited script file: muppet] wmap "J0655-2416_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8483 x 2.147 at 3.111 degrees (North through East) ! Clean map min=-0.0021809 max=0.1288 Jy/beam ! Writing clean map to FITS file: J0655-2416_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128796 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361311 device "J0655-2416_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0655-2416_X_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.841587 0.841587 1.68317 3.36635 6.73269 13.4654 26.9308 53.8615 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8483 x 2.147 at 3.111 degrees (North through East) ! Clean map min=-0.0021809 max=0.1288 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0655-2416_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0655-2416_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0655-2416_X_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:05:35 2005