! Started logfile: J0650-0152_S_2004_04_30_yyk_uvs.log on Wed Dec  7 00:05:14 2005
obs J0650-0152_S_2004_04_30_yyk_uve.fits
! Reading UV FITS file: J0650-0152_S_2004_04_30_yyk_uve.fits
! AN table 1: 10 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.866667 visibilities/baseline/integration-bin.
! Found source: J0650-0152
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1629 lines of history.
! 
! Reading 1560 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0650-0152_S_2004_04_30_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.185798 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.853029Jy  sigma=15.213038
! Fit after  self-cal, rms=0.852092Jy  sigma=15.234752
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.728 mas, bmaj=6.761 mas, bpa=-4.129 degrees
! Estimated noise=1.58742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.134286 Jy
! Component: 100  -  total flux cleaned = 0.182277 Jy
! Total flux subtracted in 100 components = 0.182277 Jy
! Clean residual min=-0.008536 max=0.015841 Jy/beam
! Clean residual mean=0.000034 rms=0.002896 Jy/beam
! Combined flux in latest and established models = 0.182277 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.182277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079984Jy  sigma=1.299558
! Fit after  self-cal, rms=0.078560Jy  sigma=1.275705
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0243474 Jy
! Component: 100  -  total flux cleaned = 0.0356101 Jy
! Total flux subtracted in 100 components = 0.0356101 Jy
! Clean residual min=-0.008050 max=0.007772 Jy/beam
! Clean residual mean=-0.000004 rms=0.001959 Jy/beam
! Combined flux in latest and established models = 0.217888 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 31 components and 0.217888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070969Jy  sigma=1.114351
! Fit after  self-cal, rms=0.070887Jy  sigma=1.112486
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.438 mas, bmaj=8.212 mas, bpa=-4.725 degrees
! Estimated noise=1.12945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131512 Jy
! Component: 100  -  total flux cleaned = 0.0198356 Jy
! Component: 150  -  total flux cleaned = 0.0233725 Jy
! Component: 200  -  total flux cleaned = 0.0243587 Jy
! Total flux subtracted in 200 components = 0.0243587 Jy
! Clean residual min=-0.005732 max=0.006931 Jy/beam
! Clean residual mean=-0.000038 rms=0.001856 Jy/beam
! Combined flux in latest and established models = 0.242246 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.242246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069365Jy  sigma=1.076688
! Fit after  self-cal, rms=0.069304Jy  sigma=1.076067
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01085
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.87     KP        0.90     
!   LA        1.16     MK        0.98     NL        1.02     OV        0.95     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.968256
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.02     KP        0.97     
!   LA        1.06     MK        1.16     NL        1.07     OV        1.02     
!   PT        0.91     SC        1.20     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02796
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.86     HN        1.05     KP        0.91     
!   LA        1.00*    MK        0.91     NL        1.07     OV        1.00*    
!   PT        0.97     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.069304Jy  sigma=1.076067
! Fit after  self-cal, rms=0.068510Jy  sigma=1.046712
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068510Jy  sigma=1.046712
! Fit after  self-cal, rms=0.068513Jy  sigma=1.046646
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.489 mas, bmaj=8.36 mas, bpa=-5.04 degrees
! Estimated noise=1.11021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00294029 Jy
! Component: 100  -  total flux cleaned = -0.00286701 Jy
! Component: 150  -  total flux cleaned = -0.00266163 Jy
! Component: 200  -  total flux cleaned = -0.00247972 Jy
! Total flux subtracted in 200 components = -0.00247972 Jy
! Clean residual min=-0.004872 max=0.005595 Jy/beam
! Clean residual mean=-0.000001 rms=0.001346 Jy/beam
! Combined flux in latest and established models = 0.239767 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.239767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068491Jy  sigma=1.042466
! Fit after  self-cal, rms=0.068469Jy  sigma=1.042347
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068469Jy  sigma=1.042347
! Fit after  self-cal, rms=0.064427Jy  sigma=0.982983
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107068 Jy
! Component: 100  -  total flux cleaned = 0.00127544 Jy
! Component: 150  -  total flux cleaned = 0.00135972 Jy
! Component: 200  -  total flux cleaned = 0.00143806 Jy
! Total flux subtracted in 200 components = 0.00143806 Jy
! Clean residual min=-0.004683 max=0.005270 Jy/beam
! Clean residual mean=-0.000001 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.241205 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 53 components and 0.241205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064395Jy  sigma=0.981788
! Fit after  self-cal, rms=0.064228Jy  sigma=0.977946
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.489 x 8.36 at -5.04 degrees (North through East)
! Clean map  min=-0.0044373  max=0.15008 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064228Jy  sigma=0.977946
! Fit after  self-cal, rms=0.062950Jy  sigma=0.971379
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062950Jy  sigma=0.971379
! Fit after  self-cal, rms=0.062977Jy  sigma=0.970927
! Inverting map and beam 
! Estimated beam: bmin=3.462 mas, bmaj=8.36 mas, bpa=-5.326 degrees
! Estimated noise=1.09042 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00261958 Jy
! Component: 100  -  total flux cleaned = -0.00303981 Jy
! Component: 150  -  total flux cleaned = -0.00304107 Jy
! Component: 200  -  total flux cleaned = -0.00301169 Jy
! Total flux subtracted in 200 components = -0.00301169 Jy
! Clean residual min=-0.004198 max=0.004949 Jy/beam
! Clean residual mean=0.000001 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.238193 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 60 components and 0.238193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062992Jy  sigma=0.969081
! Fit after  self-cal, rms=0.062999Jy  sigma=0.968932
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062999Jy  sigma=0.968932
! Fit after  self-cal, rms=0.062380Jy  sigma=0.955279
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062380Jy  sigma=0.955279
! Fit after  self-cal, rms=0.062389Jy  sigma=0.955181
! Inverting map and beam 
! Estimated beam: bmin=3.457 mas, bmaj=8.401 mas, bpa=-5.485 degrees
! Estimated noise=1.08448 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000816977 Jy
! Component: 100  -  total flux cleaned = -0.00085345 Jy
! Component: 150  -  total flux cleaned = -0.000789813 Jy
! Component: 200  -  total flux cleaned = -0.000761205 Jy
! Total flux subtracted in 200 components = -0.000761205 Jy
! Clean residual min=-0.003971 max=0.004769 Jy/beam
! Clean residual mean=0.000021 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.237432 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 61 components and 0.237432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062372Jy  sigma=0.954488
! Fit after  self-cal, rms=0.062372Jy  sigma=0.954424
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.004 mas, bmaj=12.57 mas, bpa=-2.341 degrees
! Estimated noise=1.33561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, 13).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00615749 Jy
! Component: 100  -  total flux cleaned = 0.007469 Jy
! Component: 150  -  total flux cleaned = 0.00781992 Jy
! Component: 200  -  total flux cleaned = 0.00831484 Jy
! Total flux subtracted in 200 components = 0.00831484 Jy
! Clean residual min=-0.002904 max=0.002889 Jy/beam
! Clean residual mean=0.000025 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.245747 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 107 components and 0.245747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061702Jy  sigma=0.941817
! Fit after  self-cal, rms=0.061688Jy  sigma=0.941185
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.725 mas, bmaj=6.828 mas, bpa=-4.659 degrees
! Estimated noise=1.53446 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.132274 Jy
! Component: 100  -  total flux cleaned = 0.179122 Jy
! Component: 150  -  total flux cleaned = 0.200029 Jy
! Component: 200  -  total flux cleaned = 0.212222 Jy
! Total flux subtracted in 200 components = 0.212222 Jy
! Clean residual min=-0.006561 max=0.007403 Jy/beam
! Clean residual mean=0.000014 rms=0.001682 Jy/beam
! Combined flux in latest and established models = 0.212222 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.212222 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.457 mas, bmaj=8.401 mas, bpa=-5.485 degrees
! Estimated noise=1.08448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.014089 Jy
! Component: 100  -  total flux cleaned = 0.021654 Jy
! Component: 150  -  total flux cleaned = 0.0252614 Jy
! Component: 200  -  total flux cleaned = 0.026874 Jy
! Total flux subtracted in 200 components = 0.026874 Jy
! Clean residual min=-0.003529 max=0.002840 Jy/beam
! Clean residual mean=0.000028 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.239096 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 87 components and 0.239096 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.004 mas, bmaj=12.57 mas, bpa=-2.341 degrees
! Estimated noise=1.33561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423558 Jy
! Component: 100  -  total flux cleaned = 0.00527599 Jy
! Component: 150  -  total flux cleaned = 0.00607934 Jy
! Component: 200  -  total flux cleaned = 0.00677038 Jy
! Total flux subtracted in 200 components = 0.00677038 Jy
! Clean residual min=-0.002823 max=0.002776 Jy/beam
! Clean residual mean=0.000029 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.245867 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 151 components and 0.245867 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.457 mas, bmaj=8.401 mas, bpa=-5.485 degrees
! Estimated noise=1.08448 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104576 Jy
! Component: 100  -  total flux cleaned = 0.00105307 Jy
! Component: 150  -  total flux cleaned = 0.00140431 Jy
! Component: 200  -  total flux cleaned = 0.00172411 Jy
! Total flux subtracted in 200 components = 0.00172411 Jy
! Clean residual min=-0.003231 max=0.002681 Jy/beam
! Clean residual mean=0.000010 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.247591 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 182 components and 0.247591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060969Jy  sigma=0.929531
! Fit after  self-cal, rms=0.060919Jy  sigma=0.929044
wmodel J0650-0152_S_2004_04_30_yyk\_map.mod
! Writing 182 model components to file: J0650-0152_S_2004_04_30_yyk_map.mod
wobs J0650-0152_S_2004_04_30_yyk\_uvs.fits
! Writing UV FITS file: J0650-0152_S_2004_04_30_yyk_uvs.fits
wwins J0650-0152_S_2004_04_30_yyk\_map.win
! wwins: Wrote 2 windows to J0650-0152_S_2004_04_30_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110223 Jy
! Component: 100  -  total flux cleaned = -0.00124553 Jy
! Component: 150  -  total flux cleaned = -0.00142079 Jy
! Component: 200  -  total flux cleaned = -0.00142071 Jy
! Component: 250  -  total flux cleaned = -0.00142144 Jy
! Component: 300  -  total flux cleaned = -0.00126541 Jy
! Component: 350  -  total flux cleaned = -0.000964805 Jy
! Component: 400  -  total flux cleaned = -0.000710401 Jy
! Component: 450  -  total flux cleaned = -0.000604798 Jy
! Component: 500  -  total flux cleaned = -0.000432336 Jy
! Component: 550  -  total flux cleaned = -0.000296319 Jy
! Component: 600  -  total flux cleaned = -6.34968e-05 Jy
! Component: 650  -  total flux cleaned = 0.000131818 Jy
! Component: 700  -  total flux cleaned = 0.000259984 Jy
! Component: 750  -  total flux cleaned = 0.000417552 Jy
! Component: 800  -  total flux cleaned = 0.000448904 Jy
! Component: 850  -  total flux cleaned = 0.000479546 Jy
! Component: 900  -  total flux cleaned = 0.000539426 Jy
! Component: 950  -  total flux cleaned = 0.000657819 Jy
! Component: 1000  -  total flux cleaned = 0.000716122 Jy
! Component: 1050  -  total flux cleaned = 0.000802708 Jy
! Component: 1100  -  total flux cleaned = 0.000944849 Jy
! Component: 1150  -  total flux cleaned = 0.00100096 Jy
! Component: 1200  -  total flux cleaned = 0.00119447 Jy
! Component: 1250  -  total flux cleaned = 0.00119419 Jy
! Component: 1300  -  total flux cleaned = 0.00138283 Jy
! Component: 1350  -  total flux cleaned = 0.0014095 Jy
! Component: 1400  -  total flux cleaned = 0.00146215 Jy
! Component: 1450  -  total flux cleaned = 0.00151418 Jy
! Component: 1500  -  total flux cleaned = 0.00159208 Jy
! Component: 1550  -  total flux cleaned = 0.00166921 Jy
! Component: 1600  -  total flux cleaned = 0.00184597 Jy
! Component: 1650  -  total flux cleaned = 0.00182125 Jy
! Component: 1700  -  total flux cleaned = 0.00201864 Jy
! Component: 1750  -  total flux cleaned = 0.00209156 Jy
! Component: 1800  -  total flux cleaned = 0.00211559 Jy
! Component: 1850  -  total flux cleaned = 0.00223585 Jy
! Component: 1900  -  total flux cleaned = 0.00235471 Jy
! Component: 1950  -  total flux cleaned = 0.00235471 Jy
! Component: 2000  -  total flux cleaned = 0.00242488 Jy
! Total flux subtracted in 2048 components = 0.00240183 Jy
! Clean residual min=-0.001399 max=0.001293 Jy/beam
! Clean residual mean=0.000017 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.249993 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 314 components and 0.249993 Jy
![Exited script file: muppet]
wmap "J0650-0152_S_2004_04_30_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.457 x 8.401 at -5.485 degrees (North through East)
! Clean map  min=-0.0028725  max=0.14871 Jy/beam
! Writing clean map to FITS file: J0650-0152_S_2004_04_30_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.148715 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000476437 
device "J0650-0152_S_2004_04_30_yyk\_map.eps/VPS"
! Attempting to open device: 'J0650-0152_S_2004_04_30_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.96111 0.96111 1.92222 3.84444 7.68888 15.3778 30.7555 61.511
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.148 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.457 x 8.401 at -5.485 degrees (North through East)
! Clean map  min=-0.0028725  max=0.14871 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0650-0152_S_2004_04_30_yyk\_map.gif/gif"
! Attempting to open device: 'J0650-0152_S_2004_04_30_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0650-0152_S_2004_04_30_yyk_uvs.log closed on Wed Dec  7 00:05:18 2005