! Started logfile: J0646-3903_X_2004_05_08_yyk_uvs.log on Wed Dec 7 00:04:43 2005 obs J0646-3903_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0646-3903_X_2004_05_08_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.3 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0646-3903 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0646-3903_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.151243 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.870570Jy sigma=14.275997 ! Fit after self-cal, rms=0.870304Jy sigma=14.270800 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5615 mas, bmaj=1.718 mas, bpa=-2.969 degrees ! Estimated noise=3.09854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107517 Jy ! Component: 100 - total flux cleaned = 0.126613 Jy ! Total flux subtracted in 100 components = 0.126613 Jy ! Clean residual min=-0.016069 max=0.015926 Jy/beam ! Clean residual mean=0.000016 rms=0.004447 Jy/beam ! Combined flux in latest and established models = 0.126613 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.126613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072048Jy sigma=1.121196 ! Fit after self-cal, rms=0.072031Jy sigma=1.120351 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6687 mas, bmaj=1.94 mas, bpa=-1.832 degrees ! Estimated noise=2.18571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176495 Jy ! Component: 100 - total flux cleaned = 0.0250513 Jy ! Component: 150 - total flux cleaned = 0.0282651 Jy ! Component: 200 - total flux cleaned = 0.0290816 Jy ! Total flux subtracted in 200 components = 0.0290816 Jy ! Clean residual min=-0.012837 max=0.014702 Jy/beam ! Clean residual mean=0.000039 rms=0.003832 Jy/beam ! Combined flux in latest and established models = 0.155694 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.155694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069406Jy sigma=1.071333 ! Fit after self-cal, rms=0.069378Jy sigma=1.070904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.994227 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.90 ! LA 0.99 MK 1.00 NL 1.00* OV 1.07 ! PT 1.00* SC 1.08 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.989803 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.92 ! LA 1.03 MK 0.98 NL 1.00* OV 1.09 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00505 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.86 ! LA 1.02 MK 0.93 NL 1.07 OV 1.09 ! PT 1.00* SC 0.91 ! ! ! Fit before self-cal, rms=0.069378Jy sigma=1.070904 ! Fit after self-cal, rms=0.068212Jy sigma=1.055735 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068212Jy sigma=1.055735 ! Fit after self-cal, rms=0.068192Jy sigma=1.055484 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6665 mas, bmaj=1.933 mas, bpa=-2.399 degrees ! Estimated noise=2.16403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000579774 Jy ! Component: 100 - total flux cleaned = -0.000521896 Jy ! Component: 150 - total flux cleaned = -0.000522191 Jy ! Component: 200 - total flux cleaned = -0.000519378 Jy ! Total flux subtracted in 200 components = -0.000519378 Jy ! Clean residual min=-0.009248 max=0.013707 Jy/beam ! Clean residual mean=0.000047 rms=0.003304 Jy/beam ! Combined flux in latest and established models = 0.155175 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.155175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068095Jy sigma=1.054112 ! Fit after self-cal, rms=0.068065Jy sigma=1.053798 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068065Jy sigma=1.053798 ! Fit after self-cal, rms=0.062125Jy sigma=0.967135 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168112 Jy ! Component: 100 - total flux cleaned = 0.00172659 Jy ! Component: 150 - total flux cleaned = 0.00168496 Jy ! Component: 200 - total flux cleaned = 0.00168696 Jy ! Total flux subtracted in 200 components = 0.00168696 Jy ! Clean residual min=-0.008904 max=0.014433 Jy/beam ! Clean residual mean=0.000043 rms=0.003298 Jy/beam ! Combined flux in latest and established models = 0.156862 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.156862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061977Jy sigma=0.965334 ! Fit after self-cal, rms=0.061548Jy sigma=0.959785 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6665 x 1.933 at -2.399 degrees (North through East) ! Clean map min=-0.0080252 max=0.12815 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061548Jy sigma=0.959785 ! Fit after self-cal, rms=0.061980Jy sigma=0.959628 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061980Jy sigma=0.959628 ! Fit after self-cal, rms=0.061945Jy sigma=0.959008 ! Inverting map and beam ! Estimated beam: bmin=0.6663 mas, bmaj=1.93 mas, bpa=-2.751 degrees ! Estimated noise=2.17558 mJy/beam. ! Added new window around map position (-25.2, 11.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134508 Jy ! Component: 100 - total flux cleaned = 0.0184378 Jy ! Component: 150 - total flux cleaned = 0.021637 Jy ! Component: 200 - total flux cleaned = 0.023859 Jy ! Total flux subtracted in 200 components = 0.023859 Jy ! Clean residual min=-0.006584 max=0.006432 Jy/beam ! Clean residual mean=0.000031 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.180721 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 56 components and 0.180721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060074Jy sigma=0.922196 ! Fit after self-cal, rms=0.059933Jy sigma=0.919492 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059933Jy sigma=0.919492 ! Fit after self-cal, rms=0.060551Jy sigma=0.920396 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060551Jy sigma=0.920396 ! Fit after self-cal, rms=0.060547Jy sigma=0.919992 ! Inverting map and beam ! Estimated beam: bmin=0.6821 mas, bmaj=1.953 mas, bpa=-3.476 degrees ! Estimated noise=2.18861 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319969 Jy ! Component: 100 - total flux cleaned = 0.00388268 Jy ! Component: 150 - total flux cleaned = 0.00418987 Jy ! Component: 200 - total flux cleaned = 0.00426426 Jy ! Total flux subtracted in 200 components = 0.00426426 Jy ! Clean residual min=-0.006550 max=0.007062 Jy/beam ! Clean residual mean=0.000018 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.184985 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.184985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060353Jy sigma=0.916588 ! Fit after self-cal, rms=0.060338Jy sigma=0.916131 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=8.887 mas, bpa=-0.9472 degrees ! Estimated noise=3.24568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113299 Jy ! Component: 100 - total flux cleaned = 0.00124671 Jy ! Component: 150 - total flux cleaned = 0.0012959 Jy ! Component: 200 - total flux cleaned = 0.00137004 Jy ! Total flux subtracted in 200 components = 0.00137004 Jy ! Clean residual min=-0.007496 max=0.008593 Jy/beam ! Clean residual mean=0.000039 rms=0.003154 Jy/beam ! Combined flux in latest and established models = 0.186355 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 75 components and 0.186355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060332Jy sigma=0.916016 ! Fit after self-cal, rms=0.060323Jy sigma=0.915984 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5641 mas, bmaj=1.716 mas, bpa=-3.517 degrees ! Estimated noise=3.13963 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11272 Jy ! Component: 100 - total flux cleaned = 0.132476 Jy ! Component: 150 - total flux cleaned = 0.144102 Jy ! Component: 200 - total flux cleaned = 0.152386 Jy ! Total flux subtracted in 200 components = 0.152386 Jy ! Clean residual min=-0.010663 max=0.010242 Jy/beam ! Clean residual mean=0.000011 rms=0.003032 Jy/beam ! Combined flux in latest and established models = 0.152386 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.152386 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6821 mas, bmaj=1.953 mas, bpa=-3.476 degrees ! Estimated noise=2.18861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121802 Jy ! Component: 100 - total flux cleaned = 0.0190898 Jy ! Component: 150 - total flux cleaned = 0.0237362 Jy ! Component: 200 - total flux cleaned = 0.0269848 Jy ! Total flux subtracted in 200 components = 0.0269848 Jy ! Clean residual min=-0.007381 max=0.007251 Jy/beam ! Clean residual mean=0.000018 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.179371 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.179371 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=8.887 mas, bpa=-0.9472 degrees ! Estimated noise=3.24568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431315 Jy ! Component: 100 - total flux cleaned = 0.00624404 Jy ! Component: 150 - total flux cleaned = 0.00710614 Jy ! Component: 200 - total flux cleaned = 0.00717917 Jy ! Total flux subtracted in 200 components = 0.00717917 Jy ! Clean residual min=-0.007384 max=0.008637 Jy/beam ! Clean residual mean=0.000045 rms=0.003180 Jy/beam ! Combined flux in latest and established models = 0.18655 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.18655 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6821 mas, bmaj=1.953 mas, bpa=-3.476 degrees ! Estimated noise=2.18861 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000594037 Jy ! Component: 100 - total flux cleaned = -0.000751129 Jy ! Component: 150 - total flux cleaned = -0.00088542 Jy ! Component: 200 - total flux cleaned = -0.000924744 Jy ! Total flux subtracted in 200 components = -0.000924744 Jy ! Clean residual min=-0.007007 max=0.007360 Jy/beam ! Clean residual mean=0.000019 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.185625 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.185625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060415Jy sigma=0.917097 ! Fit after self-cal, rms=0.060369Jy sigma=0.916874 wmodel J0646-3903_X_2004_05_08_yyk\_map.mod ! Writing 59 model components to file: J0646-3903_X_2004_05_08_yyk_map.mod wobs J0646-3903_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0646-3903_X_2004_05_08_yyk_uvs.fits wwins J0646-3903_X_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J0646-3903_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635524 Jy ! Component: 100 - total flux cleaned = -0.000599022 Jy ! Component: 150 - total flux cleaned = -0.0017564 Jy ! Component: 200 - total flux cleaned = -0.0026158 Jy ! Component: 250 - total flux cleaned = -0.00345506 Jy ! Component: 300 - total flux cleaned = -0.00435255 Jy ! Component: 350 - total flux cleaned = -0.00519437 Jy ! Component: 400 - total flux cleaned = -0.00587538 Jy ! Component: 450 - total flux cleaned = -0.00619827 Jy ! Component: 500 - total flux cleaned = -0.00640338 Jy ! Component: 550 - total flux cleaned = -0.00655068 Jy ! Component: 600 - total flux cleaned = -0.00673613 Jy ! Component: 650 - total flux cleaned = -0.00691412 Jy ! Component: 700 - total flux cleaned = -0.00700042 Jy ! Component: 750 - total flux cleaned = -0.00725303 Jy ! Component: 800 - total flux cleaned = -0.00745861 Jy ! Component: 850 - total flux cleaned = -0.00769896 Jy ! Component: 900 - total flux cleaned = -0.00789504 Jy ! Component: 950 - total flux cleaned = -0.00797245 Jy ! Component: 1000 - total flux cleaned = -0.00797252 Jy ! Component: 1050 - total flux cleaned = -0.00797243 Jy ! Component: 1100 - total flux cleaned = -0.00789831 Jy ! Component: 1150 - total flux cleaned = -0.0078248 Jy ! Component: 1200 - total flux cleaned = -0.00786165 Jy ! Component: 1250 - total flux cleaned = -0.00782556 Jy ! Component: 1300 - total flux cleaned = -0.00786149 Jy ! Component: 1350 - total flux cleaned = -0.00789765 Jy ! Component: 1400 - total flux cleaned = -0.00796917 Jy ! Component: 1450 - total flux cleaned = -0.00800491 Jy ! Component: 1500 - total flux cleaned = -0.00811268 Jy ! Component: 1550 - total flux cleaned = -0.00818474 Jy ! Component: 1600 - total flux cleaned = -0.00825733 Jy ! Component: 1650 - total flux cleaned = -0.00836606 Jy ! Component: 1700 - total flux cleaned = -0.00843884 Jy ! Component: 1750 - total flux cleaned = -0.00847547 Jy ! Component: 1800 - total flux cleaned = -0.00854896 Jy ! Component: 1850 - total flux cleaned = -0.00858589 Jy ! Component: 1900 - total flux cleaned = -0.00862284 Jy ! Component: 1950 - total flux cleaned = -0.00866042 Jy ! Component: 2000 - total flux cleaned = -0.00869829 Jy ! Total flux subtracted in 2048 components = -0.00869836 Jy ! Clean residual min=-0.002105 max=0.002057 Jy/beam ! Clean residual mean=-0.000021 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.176927 Jy keep ! Adding 104 model components to the UV plane model. ! The established model now contains 163 components and 0.176927 Jy ![Exited script file: muppet] wmap "J0646-3903_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6821 x 1.953 at -3.476 degrees (North through East) ! Clean map min=-0.0034501 max=0.13277 Jy/beam ! Writing clean map to FITS file: J0646-3903_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132774 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000681025 device "J0646-3903_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0646-3903_X_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.53876 1.53876 3.07751 6.15503 12.3101 24.6201 49.2402 98.4805 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6821 x 1.953 at -3.476 degrees (North through East) ! Clean map min=-0.0034501 max=0.13277 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0646-3903_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0646-3903_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0646-3903_X_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:04:47 2005