! Started logfile: J0622-0109_X_2004_05_27_yyk_uvs.log on Wed Dec  7 01:08:15 2005
obs J0622-0109_X_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J0622-0109_X_2004_05_27_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.540741 visibilities/baseline/integration-bin.
! Found source: J0622-0109
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1380 lines of history.
! 
! Reading 1460 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0622-0109_X_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0998438 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.946229Jy  sigma=16.929198
! Fit after  self-cal, rms=0.942770Jy  sigma=16.873199
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.183 mas, bmaj=4.548 mas, bpa=-17.54 degrees
! Estimated noise=1.97057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.052422 Jy
! Component: 100  -  total flux cleaned = 0.0690102 Jy
! Total flux subtracted in 100 components = 0.0690102 Jy
! Clean residual min=-0.007478 max=0.008231 Jy/beam
! Clean residual mean=-0.000008 rms=0.002175 Jy/beam
! Combined flux in latest and established models = 0.0690102 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0690102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076470Jy  sigma=1.100579
! Fit after  self-cal, rms=0.076501Jy  sigma=1.099504
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.929 mas, bmaj=5.023 mas, bpa=-15.62 degrees
! Estimated noise=1.21839 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100646 Jy
! Component: 100  -  total flux cleaned = 0.0141697 Jy
! Component: 150  -  total flux cleaned = 0.0154992 Jy
! Component: 200  -  total flux cleaned = 0.0160521 Jy
! Total flux subtracted in 200 components = 0.0160521 Jy
! Clean residual min=-0.004943 max=0.005923 Jy/beam
! Clean residual mean=-0.000005 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.0850624 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 45 model components to the UV plane model.
! The established model now contains 77 components and 0.0850624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075711Jy  sigma=1.078683
! Fit after  self-cal, rms=0.075736Jy  sigma=1.078450
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00625
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        1.00*    KP        0.85     
!   LA        1.01     MK        1.12     NL        1.03     OV        1.05     
!   PT        0.98     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.075736Jy  sigma=1.078450
! Fit after  self-cal, rms=0.075586Jy  sigma=1.076290
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075586Jy  sigma=1.076290
! Fit after  self-cal, rms=0.075588Jy  sigma=1.076283
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.996 mas, bmaj=4.989 mas, bpa=-15.57 degrees
! Estimated noise=1.20798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000219044 Jy
! Component: 100  -  total flux cleaned = -0.000271291 Jy
! Component: 150  -  total flux cleaned = -0.000271031 Jy
! Component: 200  -  total flux cleaned = -0.000308215 Jy
! Total flux subtracted in 200 components = -0.000308215 Jy
! Clean residual min=-0.004989 max=0.005385 Jy/beam
! Clean residual mean=-0.000004 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.0847542 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 83 components and 0.0847541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075532Jy  sigma=1.075299
! Fit after  self-cal, rms=0.075528Jy  sigma=1.075229
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075528Jy  sigma=1.075229
! Fit after  self-cal, rms=0.069656Jy  sigma=0.984124
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027894 Jy
! Component: 100  -  total flux cleaned = 0.00277909 Jy
! Component: 150  -  total flux cleaned = 0.00283859 Jy
! Component: 200  -  total flux cleaned = 0.00284411 Jy
! Total flux subtracted in 200 components = 0.00284412 Jy
! Clean residual min=-0.004323 max=0.005853 Jy/beam
! Clean residual mean=-0.000001 rms=0.001409 Jy/beam
! Combined flux in latest and established models = 0.0875983 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 93 components and 0.0875983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069351Jy  sigma=0.979334
! Fit after  self-cal, rms=0.068482Jy  sigma=0.970445
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.996 x 4.989 at -15.57 degrees (North through East)
! Clean map  min=-0.0042478  max=0.070574 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=5.146 mas, bpa=-11.85 degrees
! Estimated noise=1.25206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101293 Jy
! Component: 100  -  total flux cleaned = -0.000250772 Jy
! Component: 150  -  total flux cleaned = -0.000301379 Jy
! Component: 200  -  total flux cleaned = -0.000325564 Jy
! Total flux subtracted in 200 components = -0.000325564 Jy
! Clean residual min=-0.004379 max=0.005634 Jy/beam
! Clean residual mean=0.000000 rms=0.001500 Jy/beam
! Combined flux in latest and established models = 0.0872727 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 102 components and 0.0872727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068443Jy  sigma=0.970047
! Fit after  self-cal, rms=0.068277Jy  sigma=0.968387
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.205 mas, bmaj=4.522 mas, bpa=-17.54 degrees
! Estimated noise=1.9696 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0590751 Jy
! Component: 100  -  total flux cleaned = 0.075664 Jy
! Component: 150  -  total flux cleaned = 0.0796621 Jy
! Component: 200  -  total flux cleaned = 0.0823819 Jy
! Total flux subtracted in 200 components = 0.0823819 Jy
! Clean residual min=-0.007142 max=0.006670 Jy/beam
! Clean residual mean=-0.000004 rms=0.001822 Jy/beam
! Combined flux in latest and established models = 0.0823819 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0823819 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.996 mas, bmaj=4.989 mas, bpa=-15.57 degrees
! Estimated noise=1.20798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00383174 Jy
! Component: 100  -  total flux cleaned = 0.00525158 Jy
! Component: 150  -  total flux cleaned = 0.00547124 Jy
! Component: 200  -  total flux cleaned = 0.00555767 Jy
! Total flux subtracted in 200 components = 0.00555767 Jy
! Clean residual min=-0.004463 max=0.005702 Jy/beam
! Clean residual mean=0.000000 rms=0.001391 Jy/beam
! Combined flux in latest and established models = 0.0879396 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 0.0879396 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=5.146 mas, bpa=-11.85 degrees
! Estimated noise=1.25206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.03102e-05 Jy
! Component: 100  -  total flux cleaned = 5.08354e-05 Jy
! Component: 150  -  total flux cleaned = 7.76482e-05 Jy
! Component: 200  -  total flux cleaned = 5.21049e-05 Jy
! Total flux subtracted in 200 components = 5.21049e-05 Jy
! Clean residual min=-0.004504 max=0.005684 Jy/beam
! Clean residual mean=0.000000 rms=0.001518 Jy/beam
! Combined flux in latest and established models = 0.0879917 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.0879917 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.996 mas, bmaj=4.989 mas, bpa=-15.57 degrees
! Estimated noise=1.20798 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000369862 Jy
! Component: 100  -  total flux cleaned = 0.000403538 Jy
! Component: 150  -  total flux cleaned = 0.000372291 Jy
! Component: 200  -  total flux cleaned = 0.000311454 Jy
! Total flux subtracted in 200 components = 0.000311454 Jy
! Clean residual min=-0.004585 max=0.005679 Jy/beam
! Clean residual mean=0.000000 rms=0.001381 Jy/beam
! Combined flux in latest and established models = 0.0883031 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.0883031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068082Jy  sigma=0.966923
! Fit after  self-cal, rms=0.068067Jy  sigma=0.966432
wmodel J0622-0109_X_2004_05_27_yyk\_map.mod
! Writing 69 model components to file: J0622-0109_X_2004_05_27_yyk_map.mod
wobs J0622-0109_X_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J0622-0109_X_2004_05_27_yyk_uvs.fits
wwins J0622-0109_X_2004_05_27_yyk\_map.win
! wwins: Wrote 1 windows to J0622-0109_X_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241947 Jy
! Component: 100  -  total flux cleaned = 0.00347924 Jy
! Component: 150  -  total flux cleaned = 0.00414063 Jy
! Component: 200  -  total flux cleaned = 0.00441407 Jy
! Component: 250  -  total flux cleaned = 0.00441408 Jy
! Component: 300  -  total flux cleaned = 0.00423315 Jy
! Component: 350  -  total flux cleaned = 0.00423166 Jy
! Component: 400  -  total flux cleaned = 0.00390432 Jy
! Component: 450  -  total flux cleaned = 0.0035401 Jy
! Component: 500  -  total flux cleaned = 0.00324041 Jy
! Component: 550  -  total flux cleaned = 0.0028541 Jy
! Component: 600  -  total flux cleaned = 0.00248342 Jy
! Component: 650  -  total flux cleaned = 0.00221416 Jy
! Component: 700  -  total flux cleaned = 0.00191009 Jy
! Component: 750  -  total flux cleaned = 0.00186707 Jy
! Component: 800  -  total flux cleaned = 0.00162087 Jy
! Component: 850  -  total flux cleaned = 0.00142364 Jy
! Component: 900  -  total flux cleaned = 0.0013088 Jy
! Component: 950  -  total flux cleaned = 0.00134676 Jy
! Component: 1000  -  total flux cleaned = 0.00134605 Jy
! Component: 1050  -  total flux cleaned = 0.00141552 Jy
! Component: 1100  -  total flux cleaned = 0.00138094 Jy
! Component: 1150  -  total flux cleaned = 0.00114677 Jy
! Component: 1200  -  total flux cleaned = 0.00101641 Jy
! Component: 1250  -  total flux cleaned = 0.000985343 Jy
! Component: 1300  -  total flux cleaned = 0.00098565 Jy
! Component: 1350  -  total flux cleaned = 0.00092381 Jy
! Component: 1400  -  total flux cleaned = 0.000923511 Jy
! Component: 1450  -  total flux cleaned = 0.000776431 Jy
! Component: 1500  -  total flux cleaned = 0.000603708 Jy
! Component: 1550  -  total flux cleaned = 0.000632569 Jy
! Component: 1600  -  total flux cleaned = 0.00040942 Jy
! Component: 1650  -  total flux cleaned = 0.00032769 Jy
! Component: 1700  -  total flux cleaned = 0.000246738 Jy
! Component: 1750  -  total flux cleaned = 0.000166901 Jy
! Component: 1800  -  total flux cleaned = 0.000114365 Jy
! Component: 1850  -  total flux cleaned = 8.86805e-05 Jy
! Component: 1900  -  total flux cleaned = -6.4776e-05 Jy
! Component: 1950  -  total flux cleaned = -0.000216232 Jy
! Component: 2000  -  total flux cleaned = -0.000390953 Jy
! Component: 2050  -  total flux cleaned = -0.000465202 Jy
! Component: 2100  -  total flux cleaned = -0.000538683 Jy
! Component: 2150  -  total flux cleaned = -0.000563021 Jy
! Component: 2200  -  total flux cleaned = -0.000635215 Jy
! Component: 2250  -  total flux cleaned = -0.00065909 Jy
! Component: 2300  -  total flux cleaned = -0.000706577 Jy
! Component: 2350  -  total flux cleaned = -0.000753879 Jy
! Component: 2400  -  total flux cleaned = -0.000777459 Jy
! Component: 2450  -  total flux cleaned = -0.000893979 Jy
! Component: 2500  -  total flux cleaned = -0.000917235 Jy
! Component: 2550  -  total flux cleaned = -0.000940384 Jy
! Component: 2600  -  total flux cleaned = -0.000940434 Jy
! Component: 2650  -  total flux cleaned = -0.000963427 Jy
! Component: 2700  -  total flux cleaned = -0.000963383 Jy
! Component: 2750  -  total flux cleaned = -0.000940698 Jy
! Component: 2800  -  total flux cleaned = -0.000940729 Jy
! Component: 2850  -  total flux cleaned = -0.000895496 Jy
! Component: 2900  -  total flux cleaned = -0.000872881 Jy
! Component: 2950  -  total flux cleaned = -0.000850383 Jy
! Component: 3000  -  total flux cleaned = -0.000850438 Jy
! Component: 3050  -  total flux cleaned = -0.000805312 Jy
! Component: 3100  -  total flux cleaned = -0.000738034 Jy
! Component: 3150  -  total flux cleaned = -0.000760526 Jy
! Component: 3200  -  total flux cleaned = -0.000715731 Jy
! Component: 3250  -  total flux cleaned = -0.000648574 Jy
! Component: 3300  -  total flux cleaned = -0.000626458 Jy
! Component: 3350  -  total flux cleaned = -0.000581842 Jy
! Component: 3400  -  total flux cleaned = -0.00047029 Jy
! Component: 3450  -  total flux cleaned = -0.000403404 Jy
! Component: 3500  -  total flux cleaned = -0.000336438 Jy
! Component: 3550  -  total flux cleaned = -0.000224856 Jy
! Component: 3600  -  total flux cleaned = -0.00018013 Jy
! Component: 3650  -  total flux cleaned = -9.08102e-05 Jy
! Component: 3700  -  total flux cleaned = -4.59977e-05 Jy
! Component: 3750  -  total flux cleaned = 2.09495e-05 Jy
! Component: 3800  -  total flux cleaned = 0.000132837 Jy
! Component: 3850  -  total flux cleaned = 0.000222349 Jy
! Component: 3900  -  total flux cleaned = 0.000267072 Jy
! Component: 3950  -  total flux cleaned = 0.000379402 Jy
! Component: 4000  -  total flux cleaned = 0.000469219 Jy
! Component: 4050  -  total flux cleaned = 0.000514143 Jy
! Total flux subtracted in 4096 components = 0.000604327 Jy
! Clean residual min=-0.001215 max=0.001225 Jy/beam
! Clean residual mean=-0.000000 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0889075 Jy
keep
! Adding 233 model components to the UV plane model.
! The established model now contains 302 components and 0.0889075 Jy
![Exited script file: muppet]
wmap "J0622-0109_X_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.996 x 4.989 at -15.57 degrees (North through East)
! Clean map  min=-0.003033  max=0.07098 Jy/beam
! Writing clean map to FITS file: J0622-0109_X_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.07098 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000421598 
device "J0622-0109_X_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J0622-0109_X_2004_05_27_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.7819 1.7819 3.5638 7.1276 14.2552 28.5104 57.0208
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.07 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.996 x 4.989 at -15.57 degrees (North through East)
! Clean map  min=-0.003033  max=0.07098 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0622-0109_X_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J0622-0109_X_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0622-0109_X_2004_05_27_yyk_uvs.log closed on Wed Dec  7 01:08:38 2005