! Started logfile: J0619-1140_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:03:21 2005 obs J0619-1140_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0619-1140_S_2004_05_27_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.883333 visibilities/baseline/integration-bin. ! Found source: J0619-1140 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 1272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0619-1140_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.180116 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.847951Jy sigma=14.187833 ! Fit after self-cal, rms=0.847594Jy sigma=14.183678 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=6.7 mas, bpa=-2.393 degrees ! Estimated noise=1.58531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135218 Jy ! Component: 100 - total flux cleaned = 0.166202 Jy ! Total flux subtracted in 100 components = 0.166202 Jy ! Clean residual min=-0.006848 max=0.008834 Jy/beam ! Clean residual mean=0.000058 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.166202 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.166202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081976Jy sigma=1.106989 ! Fit after self-cal, rms=0.081980Jy sigma=1.106338 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=8.149 mas, bpa=-0.9945 degrees ! Estimated noise=1.21065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154206 Jy ! Component: 100 - total flux cleaned = 0.0214781 Jy ! Component: 150 - total flux cleaned = 0.024107 Jy ! Component: 200 - total flux cleaned = 0.024686 Jy ! Total flux subtracted in 200 components = 0.024686 Jy ! Clean residual min=-0.004005 max=0.005367 Jy/beam ! Clean residual mean=-0.000011 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.190888 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 0.190888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080068Jy sigma=1.066698 ! Fit after self-cal, rms=0.080075Jy sigma=1.066562 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0223 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.90 HN 0.96 KP 0.96 ! LA 0.97 MK 0.85 NL 1.08 OV 1.02 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.080075Jy sigma=1.066562 ! Fit after self-cal, rms=0.079662Jy sigma=1.061650 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079662Jy sigma=1.061650 ! Fit after self-cal, rms=0.079664Jy sigma=1.061643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.063 mas, bpa=-1.636 degrees ! Estimated noise=1.21097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180391 Jy ! Component: 100 - total flux cleaned = 0.0021247 Jy ! Component: 150 - total flux cleaned = 0.00228359 Jy ! Component: 200 - total flux cleaned = 0.00228312 Jy ! Total flux subtracted in 200 components = 0.00228312 Jy ! Clean residual min=-0.004144 max=0.005158 Jy/beam ! Clean residual mean=-0.000004 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.193171 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.193171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079540Jy sigma=1.060451 ! Fit after self-cal, rms=0.079542Jy sigma=1.060355 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079542Jy sigma=1.060355 ! Fit after self-cal, rms=0.076664Jy sigma=1.026396 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, -43). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569211 Jy ! Component: 100 - total flux cleaned = 0.00619047 Jy ! Component: 150 - total flux cleaned = 0.00648668 Jy ! Component: 200 - total flux cleaned = 0.00665757 Jy ! Total flux subtracted in 200 components = 0.00665757 Jy ! Clean residual min=-0.004242 max=0.004321 Jy/beam ! Clean residual mean=0.000003 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.199828 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.199828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076168Jy sigma=1.018505 ! Fit after self-cal, rms=0.076043Jy sigma=1.015361 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.063 at -1.636 degrees (North through East) ! Clean map min=-0.0039663 max=0.15752 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076043Jy sigma=1.015361 ! Fit after self-cal, rms=0.075545Jy sigma=1.003155 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075545Jy sigma=1.003155 ! Fit after self-cal, rms=0.075600Jy sigma=1.002787 ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=7.959 mas, bpa=-2.37 degrees ! Estimated noise=1.20529 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010964 Jy ! Component: 100 - total flux cleaned = 0.0013268 Jy ! Component: 150 - total flux cleaned = 0.00138929 Jy ! Component: 200 - total flux cleaned = 0.00144919 Jy ! Total flux subtracted in 200 components = 0.00144919 Jy ! Clean residual min=-0.004095 max=0.003655 Jy/beam ! Clean residual mean=-0.000014 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.201278 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 97 components and 0.201278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075450Jy sigma=1.000669 ! Fit after self-cal, rms=0.075476Jy sigma=1.000550 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075476Jy sigma=1.000550 ! Fit after self-cal, rms=0.074216Jy sigma=0.988527 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074216Jy sigma=0.988527 ! Fit after self-cal, rms=0.074224Jy sigma=0.988468 ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.899 mas, bpa=-2.998 degrees ! Estimated noise=1.18767 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106235 Jy ! Component: 100 - total flux cleaned = -0.000937693 Jy ! Component: 150 - total flux cleaned = -0.000823549 Jy ! Component: 200 - total flux cleaned = -0.00087678 Jy ! Total flux subtracted in 200 components = -0.00087678 Jy ! Clean residual min=-0.003853 max=0.003691 Jy/beam ! Clean residual mean=-0.000009 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.200401 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.200401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074132Jy sigma=0.986895 ! Fit after self-cal, rms=0.074144Jy sigma=0.986871 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.81 mas, bmaj=14.85 mas, bpa=1.78 degrees ! Estimated noise=1.51691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319372 Jy ! Component: 100 - total flux cleaned = -0.000537704 Jy ! Component: 150 - total flux cleaned = -0.000678989 Jy ! Component: 200 - total flux cleaned = -0.000752211 Jy ! Total flux subtracted in 200 components = -0.000752211 Jy ! Clean residual min=-0.003679 max=0.003342 Jy/beam ! Clean residual mean=-0.000016 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.199649 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 111 components and 0.199649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074138Jy sigma=0.986938 ! Fit after self-cal, rms=0.074144Jy sigma=0.986811 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=6.62 mas, bpa=-3.426 degrees ! Estimated noise=1.54837 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.134335 Jy ! Component: 100 - total flux cleaned = 0.167102 Jy ! Component: 150 - total flux cleaned = 0.180027 Jy ! Component: 200 - total flux cleaned = 0.186086 Jy ! Total flux subtracted in 200 components = 0.186086 Jy ! Clean residual min=-0.005946 max=0.005227 Jy/beam ! Clean residual mean=0.000030 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.186086 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.186086 Jy ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.899 mas, bpa=-2.998 degrees ! Estimated noise=1.18767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676074 Jy ! Component: 100 - total flux cleaned = 0.0105047 Jy ! Component: 150 - total flux cleaned = 0.011709 Jy ! Component: 200 - total flux cleaned = 0.0120061 Jy ! Total flux subtracted in 200 components = 0.0120061 Jy ! Clean residual min=-0.004365 max=0.003489 Jy/beam ! Clean residual mean=-0.000001 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.198092 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 68 components and 0.198092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.81 mas, bmaj=14.85 mas, bpa=1.78 degrees ! Estimated noise=1.51691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141467 Jy ! Component: 100 - total flux cleaned = 0.0014991 Jy ! Component: 150 - total flux cleaned = 0.00156535 Jy ! Component: 200 - total flux cleaned = 0.00159367 Jy ! Total flux subtracted in 200 components = 0.00159367 Jy ! Clean residual min=-0.003602 max=0.003316 Jy/beam ! Clean residual mean=-0.000016 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.199685 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.199685 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.899 mas, bpa=-2.998 degrees ! Estimated noise=1.18767 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184585 Jy ! Component: 100 - total flux cleaned = -0.000331679 Jy ! Component: 150 - total flux cleaned = -0.000460899 Jy ! Component: 200 - total flux cleaned = -0.000518998 Jy ! Total flux subtracted in 200 components = -0.000518998 Jy ! Clean residual min=-0.004052 max=0.003560 Jy/beam ! Clean residual mean=-0.000007 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.199166 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.199166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074161Jy sigma=0.987784 ! Fit after self-cal, rms=0.074168Jy sigma=0.987687 wmodel J0619-1140_S_2004_05_27_yyk\_map.mod ! Writing 96 model components to file: J0619-1140_S_2004_05_27_yyk_map.mod wobs J0619-1140_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0619-1140_S_2004_05_27_yyk_uvs.fits wwins J0619-1140_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J0619-1140_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000797664 Jy ! Component: 100 - total flux cleaned = -0.00130503 Jy ! Component: 150 - total flux cleaned = -0.00184244 Jy ! Component: 200 - total flux cleaned = -0.00241615 Jy ! Component: 250 - total flux cleaned = -0.00307801 Jy ! Component: 300 - total flux cleaned = -0.00355616 Jy ! Component: 350 - total flux cleaned = -0.00417353 Jy ! Component: 400 - total flux cleaned = -0.00467514 Jy ! Component: 450 - total flux cleaned = -0.00511635 Jy ! Component: 500 - total flux cleaned = -0.00578562 Jy ! Component: 550 - total flux cleaned = -0.00611235 Jy ! Component: 600 - total flux cleaned = -0.00661526 Jy ! Component: 650 - total flux cleaned = -0.00679402 Jy ! Component: 700 - total flux cleaned = -0.00714638 Jy ! Component: 750 - total flux cleaned = -0.00744935 Jy ! Component: 800 - total flux cleaned = -0.00774827 Jy ! Component: 850 - total flux cleaned = -0.00816774 Jy ! Component: 900 - total flux cleaned = -0.0085792 Jy ! Component: 950 - total flux cleaned = -0.00882282 Jy ! Component: 1000 - total flux cleaned = -0.00914223 Jy ! Component: 1050 - total flux cleaned = -0.00949717 Jy ! Component: 1100 - total flux cleaned = -0.0096529 Jy ! Component: 1150 - total flux cleaned = -0.010075 Jy ! Component: 1200 - total flux cleaned = -0.0103393 Jy ! Component: 1250 - total flux cleaned = -0.0106376 Jy ! Component: 1300 - total flux cleaned = -0.0108583 Jy ! Component: 1350 - total flux cleaned = -0.0111493 Jy ! Component: 1400 - total flux cleaned = -0.0115079 Jy ! Component: 1450 - total flux cleaned = -0.0118264 Jy ! Component: 1500 - total flux cleaned = -0.0118969 Jy ! Component: 1550 - total flux cleaned = -0.0122085 Jy ! Component: 1600 - total flux cleaned = -0.0124476 Jy ! Component: 1650 - total flux cleaned = -0.0126507 Jy ! Component: 1700 - total flux cleaned = -0.0128512 Jy ! Component: 1750 - total flux cleaned = -0.0130503 Jy ! Component: 1800 - total flux cleaned = -0.0133129 Jy ! Component: 1850 - total flux cleaned = -0.0134101 Jy ! Component: 1900 - total flux cleaned = -0.0135063 Jy ! Component: 1950 - total flux cleaned = -0.0136015 Jy ! Component: 2000 - total flux cleaned = -0.0138224 Jy ! Total flux subtracted in 2048 components = -0.0139157 Jy ! Clean residual min=-0.001712 max=0.001773 Jy/beam ! Clean residual mean=-0.000025 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.185251 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 224 components and 0.185251 Jy ![Exited script file: muppet] wmap "J0619-1140_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.212 x 7.899 at -2.998 degrees (North through East) ! Clean map min=-0.0043165 max=0.15313 Jy/beam ! Writing clean map to FITS file: J0619-1140_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153126 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000625102 device "J0619-1140_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0619-1140_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22468 1.22468 2.44936 4.89873 9.79746 19.5949 39.1898 78.3797 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.212 x 7.899 at -2.998 degrees (North through East) ! Clean map min=-0.0043165 max=0.15313 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0619-1140_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0619-1140_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0619-1140_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:03:25 2005