! Started logfile: J0612-3138_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:03:04 2005 obs J0612-3138_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0612-3138_S_2004_05_08_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.648889 visibilities/baseline/integration-bin. ! Found source: J0612-3138 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0612-3138_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.162868 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895943Jy sigma=11.786176 ! Fit after self-cal, rms=0.896480Jy sigma=11.791415 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=14.95 mas, bpa=-21.96 degrees ! Estimated noise=4.325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0931405 Jy ! Component: 100 - total flux cleaned = 0.119136 Jy ! Total flux subtracted in 100 components = 0.119136 Jy ! Clean residual min=-0.015530 max=0.014820 Jy/beam ! Clean residual mean=-0.000036 rms=0.004180 Jy/beam ! Combined flux in latest and established models = 0.119136 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.119136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116903Jy sigma=1.139344 ! Fit after self-cal, rms=0.116949Jy sigma=1.138254 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=20.43 mas, bpa=-20.6 degrees ! Estimated noise=2.55135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163931 Jy ! Component: 100 - total flux cleaned = 0.021013 Jy ! Component: 150 - total flux cleaned = 0.0211558 Jy ! Component: 200 - total flux cleaned = 0.0211594 Jy ! Total flux subtracted in 200 components = 0.0211594 Jy ! Clean residual min=-0.009294 max=0.008162 Jy/beam ! Clean residual mean=-0.000097 rms=0.002890 Jy/beam ! Combined flux in latest and established models = 0.140296 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 58 components and 0.140296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116199Jy sigma=1.109915 ! Fit after self-cal, rms=0.116196Jy sigma=1.109487 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03222 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.85 HN 0.88 KP 0.99 ! LA 0.88 MK 1.08 NL 1.04 OV 0.96 ! PT 1.08 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.116196Jy sigma=1.109487 ! Fit after self-cal, rms=0.114933Jy sigma=1.105777 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114933Jy sigma=1.105777 ! Fit after self-cal, rms=0.114942Jy sigma=1.105748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.08 mas, bmaj=20.45 mas, bpa=-20.07 degrees ! Estimated noise=2.55809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107938 Jy ! Component: 100 - total flux cleaned = 0.00010727 Jy ! Component: 150 - total flux cleaned = 0.000197085 Jy ! Component: 200 - total flux cleaned = 0.000280416 Jy ! Total flux subtracted in 200 components = 0.000280416 Jy ! Clean residual min=-0.009870 max=0.008426 Jy/beam ! Clean residual mean=-0.000070 rms=0.002865 Jy/beam ! Combined flux in latest and established models = 0.140576 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 0.140576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114927Jy sigma=1.103531 ! Fit after self-cal, rms=0.114917Jy sigma=1.103431 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114917Jy sigma=1.103431 ! Fit after self-cal, rms=0.108954Jy sigma=1.037552 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292258 Jy ! Component: 100 - total flux cleaned = 0.00324458 Jy ! Component: 150 - total flux cleaned = 0.00332743 Jy ! Component: 200 - total flux cleaned = 0.00339909 Jy ! Total flux subtracted in 200 components = 0.00339909 Jy ! Clean residual min=-0.009664 max=0.008673 Jy/beam ! Clean residual mean=-0.000086 rms=0.002782 Jy/beam ! Combined flux in latest and established models = 0.143975 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.143975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108793Jy sigma=1.034673 ! Fit after self-cal, rms=0.107891Jy sigma=1.026940 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.08 x 20.45 at -20.07 degrees (North through East) ! Clean map min=-0.0094764 max=0.11627 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107891Jy sigma=1.026940 ! Fit after self-cal, rms=0.106055Jy sigma=1.025873 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106055Jy sigma=1.025873 ! Fit after self-cal, rms=0.106044Jy sigma=1.025052 ! Inverting map and beam ! Estimated beam: bmin=5.064 mas, bmaj=20.38 mas, bpa=-20.05 degrees ! Estimated noise=2.52484 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157482 Jy ! Component: 100 - total flux cleaned = -0.00163881 Jy ! Component: 150 - total flux cleaned = -0.00163369 Jy ! Component: 200 - total flux cleaned = -0.00158119 Jy ! Total flux subtracted in 200 components = -0.00158119 Jy ! Clean residual min=-0.009254 max=0.008742 Jy/beam ! Clean residual mean=-0.000091 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 0.142394 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.142394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105935Jy sigma=1.023994 ! Fit after self-cal, rms=0.105966Jy sigma=1.023802 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105966Jy sigma=1.023802 ! Fit after self-cal, rms=0.106826Jy sigma=1.014903 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106826Jy sigma=1.014903 ! Fit after self-cal, rms=0.106876Jy sigma=1.014799 ! Inverting map and beam ! Estimated beam: bmin=4.992 mas, bmaj=20.37 mas, bpa=-20.32 degrees ! Estimated noise=2.5096 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870231 Jy ! Component: 100 - total flux cleaned = 0.000923986 Jy ! Component: 150 - total flux cleaned = 0.000975727 Jy ! Component: 200 - total flux cleaned = 0.00102651 Jy ! Total flux subtracted in 200 components = 0.00102651 Jy ! Clean residual min=-0.008764 max=0.008239 Jy/beam ! Clean residual mean=-0.000030 rms=0.002606 Jy/beam ! Combined flux in latest and established models = 0.143421 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 116 components and 0.143421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106732Jy sigma=1.013933 ! Fit after self-cal, rms=0.106767Jy sigma=1.013845 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.848 mas, bmaj=32.43 mas, bpa=-4.141 degrees ! Estimated noise=2.72114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711 Jy ! Component: 100 - total flux cleaned = 0.000839206 Jy ! Component: 150 - total flux cleaned = 0.000998799 Jy ! Component: 200 - total flux cleaned = 0.00109384 Jy ! Total flux subtracted in 200 components = 0.00109384 Jy ! Clean residual min=-0.008185 max=0.008851 Jy/beam ! Clean residual mean=-0.000034 rms=0.002783 Jy/beam ! Combined flux in latest and established models = 0.144515 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 126 components and 0.144515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106892Jy sigma=1.013731 ! Fit after self-cal, rms=0.106865Jy sigma=1.013373 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=14.95 mas, bpa=-21.92 degrees ! Estimated noise=4.27087 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0981543 Jy ! Component: 100 - total flux cleaned = 0.123331 Jy ! Component: 150 - total flux cleaned = 0.132775 Jy ! Component: 200 - total flux cleaned = 0.136011 Jy ! Total flux subtracted in 200 components = 0.136011 Jy ! Clean residual min=-0.011349 max=0.011841 Jy/beam ! Clean residual mean=-0.000007 rms=0.003306 Jy/beam ! Combined flux in latest and established models = 0.136011 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.136011 Jy ! Inverting map and beam ! Estimated beam: bmin=4.992 mas, bmaj=20.37 mas, bpa=-20.32 degrees ! Estimated noise=2.5096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533676 Jy ! Component: 100 - total flux cleaned = 0.0053327 Jy ! Component: 150 - total flux cleaned = 0.00534073 Jy ! Component: 200 - total flux cleaned = 0.00544967 Jy ! Total flux subtracted in 200 components = 0.00544967 Jy ! Clean residual min=-0.009053 max=0.008347 Jy/beam ! Clean residual mean=-0.000030 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.141461 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.141461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.848 mas, bmaj=32.43 mas, bpa=-4.141 degrees ! Estimated noise=2.72114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108237 Jy ! Component: 100 - total flux cleaned = 0.00107957 Jy ! Component: 150 - total flux cleaned = 0.00108041 Jy ! Component: 200 - total flux cleaned = 0.00115873 Jy ! Total flux subtracted in 200 components = 0.00115873 Jy ! Clean residual min=-0.008428 max=0.009208 Jy/beam ! Clean residual mean=-0.000029 rms=0.002876 Jy/beam ! Combined flux in latest and established models = 0.14262 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 0.14262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.992 mas, bmaj=20.37 mas, bpa=-20.32 degrees ! Estimated noise=2.5096 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.97753e-05 Jy ! Component: 100 - total flux cleaned = -0.000145421 Jy ! Component: 150 - total flux cleaned = -0.000142688 Jy ! Component: 200 - total flux cleaned = -0.00014417 Jy ! Total flux subtracted in 200 components = -0.00014417 Jy ! Clean residual min=-0.009041 max=0.008123 Jy/beam ! Clean residual mean=-0.000030 rms=0.002637 Jy/beam ! Combined flux in latest and established models = 0.142475 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.142475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106579Jy sigma=1.014026 ! Fit after self-cal, rms=0.106578Jy sigma=1.013872 wmodel J0612-3138_S_2004_05_08_yyk\_map.mod ! Writing 77 model components to file: J0612-3138_S_2004_05_08_yyk_map.mod wobs J0612-3138_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0612-3138_S_2004_05_08_yyk_uvs.fits wwins J0612-3138_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J0612-3138_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000731675 Jy ! Component: 100 - total flux cleaned = -0.00109296 Jy ! Component: 150 - total flux cleaned = -0.00177813 Jy ! Component: 200 - total flux cleaned = -0.00271416 Jy ! Component: 250 - total flux cleaned = -0.00310372 Jy ! Component: 300 - total flux cleaned = -0.00355116 Jy ! Component: 350 - total flux cleaned = -0.00396693 Jy ! Component: 400 - total flux cleaned = -0.00428004 Jy ! Component: 450 - total flux cleaned = -0.00435304 Jy ! Component: 500 - total flux cleaned = -0.00470703 Jy ! Component: 550 - total flux cleaned = -0.0047767 Jy ! Component: 600 - total flux cleaned = -0.00497261 Jy ! Component: 650 - total flux cleaned = -0.00522206 Jy ! Component: 700 - total flux cleaned = -0.00546472 Jy ! Component: 750 - total flux cleaned = -0.00569983 Jy ! Component: 800 - total flux cleaned = -0.00609929 Jy ! Component: 850 - total flux cleaned = -0.00621024 Jy ! Component: 900 - total flux cleaned = -0.00658879 Jy ! Component: 950 - total flux cleaned = -0.006746 Jy ! Component: 1000 - total flux cleaned = -0.00705308 Jy ! Component: 1050 - total flux cleaned = -0.00715336 Jy ! Component: 1100 - total flux cleaned = -0.00734776 Jy ! Component: 1150 - total flux cleaned = -0.00758117 Jy ! Component: 1200 - total flux cleaned = -0.00767131 Jy ! Component: 1250 - total flux cleaned = -0.00776067 Jy ! Component: 1300 - total flux cleaned = -0.00780526 Jy ! Component: 1350 - total flux cleaned = -0.00755096 Jy ! Component: 1400 - total flux cleaned = -0.00734386 Jy ! Component: 1450 - total flux cleaned = -0.00726306 Jy ! Component: 1500 - total flux cleaned = -0.00706455 Jy ! Component: 1550 - total flux cleaned = -0.00702591 Jy ! Component: 1600 - total flux cleaned = -0.00694901 Jy ! Component: 1650 - total flux cleaned = -0.00683581 Jy ! Component: 1700 - total flux cleaned = -0.00665188 Jy ! Component: 1750 - total flux cleaned = -0.00643446 Jy ! Component: 1800 - total flux cleaned = -0.00622051 Jy ! Component: 1850 - total flux cleaned = -0.00604541 Jy ! Component: 1900 - total flux cleaned = -0.00580432 Jy ! Component: 1950 - total flux cleaned = -0.00560037 Jy ! Component: 2000 - total flux cleaned = -0.00529896 Jy ! Total flux subtracted in 2048 components = -0.00506811 Jy ! Clean residual min=-0.002121 max=0.002024 Jy/beam ! Clean residual mean=-0.000013 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.137407 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 230 components and 0.137407 Jy ![Exited script file: muppet] wmap "J0612-3138_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.992 x 20.37 at -20.32 degrees (North through East) ! Clean map min=-0.0061204 max=0.11459 Jy/beam ! Writing clean map to FITS file: J0612-3138_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114586 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000725813 device "J0612-3138_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0612-3138_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.90026 1.90026 3.80053 7.60106 15.2021 30.4042 60.8085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.992 x 20.37 at -20.32 degrees (North through East) ! Clean map min=-0.0061204 max=0.11459 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0612-3138_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0612-3138_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0612-3138_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:03:08 2005