! Started logfile: J0601-2736_S_2004_05_27_yyk_uvs.log on Wed Dec  7 01:03:07 2005
obs J0601-2736_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J0601-2736_S_2004_05_27_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.459259 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0601-2736
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1384 lines of history.
! 
! Reading 1240 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0601-2736_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 2.00x2.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.121256 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.929288Jy  sigma=14.172944
! Fit after  self-cal, rms=0.921706Jy  sigma=14.068559
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.02 mas, bmaj=38.66 mas, bpa=21.56 degrees
! Estimated noise=3.42967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0681275 Jy
! Component: 100  -  total flux cleaned = 0.0694114 Jy
! Total flux subtracted in 100 components = 0.0694114 Jy
! Clean residual min=-0.011302 max=0.009622 Jy/beam
! Clean residual mean=0.000019 rms=0.003463 Jy/beam
! Combined flux in latest and established models = 0.0694114 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0694114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088890Jy  sigma=1.100700
! Fit after  self-cal, rms=0.088837Jy  sigma=1.098438
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.23 mas, bmaj=48.25 mas, bpa=15.16 degrees
! Estimated noise=1.98617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00754578 Jy
! Component: 100  -  total flux cleaned = 0.00869791 Jy
! Component: 150  -  total flux cleaned = 0.00932746 Jy
! Component: 200  -  total flux cleaned = 0.00963954 Jy
! Total flux subtracted in 200 components = 0.00963954 Jy
! Clean residual min=-0.007260 max=0.005152 Jy/beam
! Clean residual mean=0.000099 rms=0.002049 Jy/beam
! Combined flux in latest and established models = 0.0790509 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.0790509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088332Jy  sigma=1.087000
! Fit after  self-cal, rms=0.088361Jy  sigma=1.086861
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.973277
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.01     HN        1.00*    KP        0.85     
!   LA        1.18     MK        1.00*    NL        1.00*    OV        1.15     
!   PT        1.08     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.990262
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.00*    KP        0.95     
!   LA        1.15     MK        1.00*    NL        1.00*    OV        1.03     
!   PT        0.87     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.992773
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.90     HN        1.00*    KP        1.01     
!   LA        1.03     MK        1.00*    NL        1.00*    OV        1.08     
!   PT        1.06     SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.03763
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.00*    KP        0.87     
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        0.84     
!   PT        0.99     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.088361Jy  sigma=1.086861
! Fit after  self-cal, rms=0.088191Jy  sigma=1.074706
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088191Jy  sigma=1.074706
! Fit after  self-cal, rms=0.088251Jy  sigma=1.074620
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.39 mas, bmaj=49.21 mas, bpa=15.26 degrees
! Estimated noise=1.95426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000195603 Jy
! Component: 100  -  total flux cleaned = -0.000172503 Jy
! Component: 150  -  total flux cleaned = -0.000356749 Jy
! Component: 200  -  total flux cleaned = -0.000573686 Jy
! Total flux subtracted in 200 components = -0.000573686 Jy
! Clean residual min=-0.005093 max=0.003929 Jy/beam
! Clean residual mean=0.000038 rms=0.001404 Jy/beam
! Combined flux in latest and established models = 0.0784772 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 40 components and 0.0784772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088125Jy  sigma=1.072900
! Fit after  self-cal, rms=0.088174Jy  sigma=1.072710
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088174Jy  sigma=1.072710
! Fit after  self-cal, rms=0.077380Jy  sigma=0.926691
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00540987 Jy
! Component: 100  -  total flux cleaned = 0.00462071 Jy
! Component: 150  -  total flux cleaned = 0.00381408 Jy
! Component: 200  -  total flux cleaned = 0.00305735 Jy
! Total flux subtracted in 200 components = 0.00305735 Jy
! Clean residual min=-0.005996 max=0.003254 Jy/beam
! Clean residual mean=-0.000008 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.0815346 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.0815346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076701Jy  sigma=0.918316
! Fit after  self-cal, rms=0.075441Jy  sigma=0.905853
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.39 x 49.21 at 15.26 degrees (North through East)
! Clean map  min=-0.0096367  max=0.089587 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.13 mas, bmaj=49.53 mas, bpa=14.7 degrees
! Estimated noise=1.96438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000571537 Jy
! Component: 100  -  total flux cleaned = -0.00111161 Jy
! Component: 150  -  total flux cleaned = -0.00167093 Jy
! Component: 200  -  total flux cleaned = -0.0020497 Jy
! Total flux subtracted in 200 components = -0.0020497 Jy
! Clean residual min=-0.005441 max=0.002909 Jy/beam
! Clean residual mean=-0.000018 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.0794849 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.0794849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075306Jy  sigma=0.904964
! Fit after  self-cal, rms=0.075136Jy  sigma=0.903253
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.07 mas, bmaj=38.72 mas, bpa=21.68 degrees
! Estimated noise=3.47894 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0805797 Jy
! Component: 100  -  total flux cleaned = 0.0821741 Jy
! Component: 150  -  total flux cleaned = 0.0818278 Jy
! Component: 200  -  total flux cleaned = 0.0820092 Jy
! Total flux subtracted in 200 components = 0.0820092 Jy
! Clean residual min=-0.009578 max=0.007540 Jy/beam
! Clean residual mean=-0.000030 rms=0.002422 Jy/beam
! Combined flux in latest and established models = 0.0820092 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0820092 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.39 mas, bmaj=49.21 mas, bpa=15.26 degrees
! Estimated noise=1.95426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00204166 Jy
! Component: 100  -  total flux cleaned = -0.00203668 Jy
! Component: 150  -  total flux cleaned = -0.00213619 Jy
! Component: 200  -  total flux cleaned = -0.0021786 Jy
! Total flux subtracted in 200 components = -0.0021786 Jy
! Clean residual min=-0.005643 max=0.003529 Jy/beam
! Clean residual mean=-0.000015 rms=0.001234 Jy/beam
! Combined flux in latest and established models = 0.0798306 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 40 components and 0.0798306 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.13 mas, bmaj=49.53 mas, bpa=14.7 degrees
! Estimated noise=1.96438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112629 Jy
! Component: 100  -  total flux cleaned = -8.14506e-05 Jy
! Component: 150  -  total flux cleaned = -8.02895e-05 Jy
! Component: 200  -  total flux cleaned = -0.000160008 Jy
! Total flux subtracted in 200 components = -0.000160008 Jy
! Clean residual min=-0.005164 max=0.003225 Jy/beam
! Clean residual mean=-0.000016 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.0796706 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.0796706 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.39 mas, bmaj=49.21 mas, bpa=15.26 degrees
! Estimated noise=1.95426 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -2.835e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106796 Jy
! Component: 150  -  total flux cleaned = -0.000157672 Jy
! Component: 200  -  total flux cleaned = -0.000254085 Jy
! Total flux subtracted in 200 components = -0.000254085 Jy
! Clean residual min=-0.005575 max=0.003381 Jy/beam
! Clean residual mean=-0.000015 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.0794165 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.0794165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074957Jy  sigma=0.902576
! Fit after  self-cal, rms=0.074925Jy  sigma=0.902141
wmodel J0601-2736_S_2004_05_27_yyk\_map.mod
! Writing 55 model components to file: J0601-2736_S_2004_05_27_yyk_map.mod
wobs J0601-2736_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J0601-2736_S_2004_05_27_yyk_uvs.fits
wwins J0601-2736_S_2004_05_27_yyk\_map.win
! wwins: Wrote 1 windows to J0601-2736_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00216745 Jy
! Component: 100  -  total flux cleaned = -0.00335611 Jy
! Component: 150  -  total flux cleaned = -0.00402936 Jy
! Component: 200  -  total flux cleaned = -0.00475949 Jy
! Component: 250  -  total flux cleaned = -0.00532779 Jy
! Component: 300  -  total flux cleaned = -0.00585451 Jy
! Component: 350  -  total flux cleaned = -0.00630033 Jy
! Component: 400  -  total flux cleaned = -0.00667915 Jy
! Component: 450  -  total flux cleaned = -0.00708136 Jy
! Component: 500  -  total flux cleaned = -0.00727554 Jy
! Component: 550  -  total flux cleaned = -0.0073864 Jy
! Component: 600  -  total flux cleaned = -0.00760134 Jy
! Component: 650  -  total flux cleaned = -0.0077064 Jy
! Component: 700  -  total flux cleaned = -0.00791006 Jy
! Component: 750  -  total flux cleaned = -0.00804209 Jy
! Component: 800  -  total flux cleaned = -0.00820294 Jy
! Component: 850  -  total flux cleaned = -0.00832869 Jy
! Component: 900  -  total flux cleaned = -0.00842072 Jy
! Component: 950  -  total flux cleaned = -0.00851078 Jy
! Component: 1000  -  total flux cleaned = -0.00862783 Jy
! Total flux subtracted in 1024 components = -0.00865642 Jy
! Clean residual min=-0.002106 max=0.001516 Jy/beam
! Clean residual mean=-0.000010 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.0707601 Jy
keep
! Adding 45 model components to the UV plane model.
! The established model now contains 100 components and 0.0707601 Jy
![Exited script file: muppet]
wmap "J0601-2736_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.39 x 49.21 at 15.26 degrees (North through East)
! Clean map  min=-0.010558  max=0.089649 Jy/beam
! Writing clean map to FITS file: J0601-2736_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0896494 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000608041 
device "J0601-2736_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J0601-2736_S_2004_05_27_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.03473 2.03473 4.06946 8.13892 16.2778 32.5557 65.1114
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0018 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.089 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.39 x 49.21 at 15.26 degrees (North through East)
! Clean map  min=-0.010558  max=0.089649 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0601-2736_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J0601-2736_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0601-2736_S_2004_05_27_yyk_uvs.log closed on Wed Dec  7 01:03:08 2005