! Started logfile: J0539-2839_S_2004_04_30_yyk_uvs.log on Wed Dec 7 01:01:32 2005 obs J0539-2839_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0539-2839_S_2004_04_30_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706667 visibilities/baseline/integration-bin. ! Found source: J0539-2839 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1635 lines of history. ! ! Reading 636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0539-2839_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.572334 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.474437Jy sigma=6.662691 ! Fit after self-cal, rms=0.474846Jy sigma=6.672128 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=13.48 mas, bpa=-13.44 degrees ! Estimated noise=3.0943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.471391 Jy ! Component: 100 - total flux cleaned = 0.576402 Jy ! Total flux subtracted in 100 components = 0.576402 Jy ! Clean residual min=-0.019758 max=0.035032 Jy/beam ! Clean residual mean=-0.000267 rms=0.007890 Jy/beam ! Combined flux in latest and established models = 0.576403 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.576403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130757Jy sigma=1.659113 ! Fit after self-cal, rms=0.130306Jy sigma=1.654868 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=17.02 mas, bpa=-13.87 degrees ! Estimated noise=2.04208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0508075 Jy ! Component: 100 - total flux cleaned = 0.0731319 Jy ! Component: 150 - total flux cleaned = 0.0840109 Jy ! Component: 200 - total flux cleaned = 0.0871121 Jy ! Total flux subtracted in 200 components = 0.0871121 Jy ! Clean residual min=-0.014738 max=0.016501 Jy/beam ! Clean residual mean=-0.000725 rms=0.005030 Jy/beam ! Combined flux in latest and established models = 0.663515 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 71 components and 0.663515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116922Jy sigma=1.405054 ! Fit after self-cal, rms=0.116871Jy sigma=1.403756 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.998112 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 1.05 KP 0.94 ! LA 1.14 MK 1.01 NL 0.99 OV 0.95 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98652 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.16 KP 0.99 ! LA 1.12 MK 1.01 NL 1.02 OV 0.97 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.984545 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.15 KP 0.98 ! LA 0.96 MK 1.07 NL 1.08 OV 0.98 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.116871Jy sigma=1.403756 ! Fit after self-cal, rms=0.110824Jy sigma=1.235805 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110824Jy sigma=1.235805 ! Fit after self-cal, rms=0.110805Jy sigma=1.235748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=17.04 mas, bpa=-13.96 degrees ! Estimated noise=2.02075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00779401 Jy ! Component: 100 - total flux cleaned = -0.00782088 Jy ! Component: 150 - total flux cleaned = -0.00784357 Jy ! Component: 200 - total flux cleaned = -0.00751702 Jy ! Total flux subtracted in 200 components = -0.00751702 Jy ! Clean residual min=-0.008497 max=0.011844 Jy/beam ! Clean residual mean=-0.000017 rms=0.003151 Jy/beam ! Combined flux in latest and established models = 0.655998 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 0.655998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110071Jy sigma=1.217201 ! Fit after self-cal, rms=0.110061Jy sigma=1.216822 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110061Jy sigma=1.216822 ! Fit after self-cal, rms=0.108109Jy sigma=1.163321 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712726 Jy ! Component: 100 - total flux cleaned = 0.000847078 Jy ! Component: 150 - total flux cleaned = 0.000970889 Jy ! Component: 200 - total flux cleaned = 0.00108452 Jy ! Total flux subtracted in 200 components = 0.00108452 Jy ! Clean residual min=-0.007658 max=0.011257 Jy/beam ! Clean residual mean=-0.000033 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 0.657082 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.657082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107804Jy sigma=1.158948 ! Fit after self-cal, rms=0.107606Jy sigma=1.153712 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.872 x 17.04 at -13.96 degrees (North through East) ! Clean map min=-0.0073699 max=0.54479 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107606Jy sigma=1.153712 ! Fit after self-cal, rms=0.110637Jy sigma=1.197351 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110637Jy sigma=1.197351 ! Fit after self-cal, rms=0.110411Jy sigma=1.192436 ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=17.02 mas, bpa=-13.96 degrees ! Estimated noise=2.0282 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159647 Jy ! Component: 100 - total flux cleaned = 0.0019232 Jy ! Component: 150 - total flux cleaned = 0.00206657 Jy ! Component: 200 - total flux cleaned = 0.00220142 Jy ! Total flux subtracted in 200 components = 0.00220142 Jy ! Clean residual min=-0.010165 max=0.012191 Jy/beam ! Clean residual mean=0.000123 rms=0.003554 Jy/beam ! Combined flux in latest and established models = 0.659283 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.659283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109919Jy sigma=1.185859 ! Fit after self-cal, rms=0.109849Jy sigma=1.185345 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109849Jy sigma=1.185345 ! Fit after self-cal, rms=0.109306Jy sigma=1.178414 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109306Jy sigma=1.178414 ! Fit after self-cal, rms=0.109278Jy sigma=1.176997 ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=17 mas, bpa=-13.9 degrees ! Estimated noise=2.03447 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198284 Jy ! Component: 100 - total flux cleaned = 0.00212348 Jy ! Component: 150 - total flux cleaned = 0.00225415 Jy ! Component: 200 - total flux cleaned = 0.00248122 Jy ! Total flux subtracted in 200 components = 0.00248122 Jy ! Clean residual min=-0.010367 max=0.012214 Jy/beam ! Clean residual mean=0.000136 rms=0.003544 Jy/beam ! Combined flux in latest and established models = 0.661765 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.661765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108945Jy sigma=1.172310 ! Fit after self-cal, rms=0.108905Jy sigma=1.172162 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.983 mas, bmaj=28.07 mas, bpa=4.375 degrees ! Estimated noise=2.33252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181275 Jy ! Component: 100 - total flux cleaned = 0.000449308 Jy ! Component: 150 - total flux cleaned = 0.000569706 Jy ! Component: 200 - total flux cleaned = 0.000686753 Jy ! Total flux subtracted in 200 components = 0.000686753 Jy ! Clean residual min=-0.012169 max=0.011283 Jy/beam ! Clean residual mean=0.000186 rms=0.003970 Jy/beam ! Combined flux in latest and established models = 0.662451 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 127 components and 0.662451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108794Jy sigma=1.171223 ! Fit after self-cal, rms=0.108767Jy sigma=1.170640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.976 mas, bmaj=13.45 mas, bpa=-13.54 degrees ! Estimated noise=3.09049 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.469987 Jy ! Component: 100 - total flux cleaned = 0.567686 Jy ! Component: 150 - total flux cleaned = 0.60979 Jy ! Component: 200 - total flux cleaned = 0.633195 Jy ! Total flux subtracted in 200 components = 0.633196 Jy ! Clean residual min=-0.017231 max=0.017398 Jy/beam ! Clean residual mean=0.000182 rms=0.005094 Jy/beam ! Combined flux in latest and established models = 0.633195 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.633195 Jy ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=17 mas, bpa=-13.9 degrees ! Estimated noise=2.03447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161284 Jy ! Component: 100 - total flux cleaned = 0.0235673 Jy ! Component: 150 - total flux cleaned = 0.0247159 Jy ! Component: 200 - total flux cleaned = 0.0252336 Jy ! Total flux subtracted in 200 components = 0.0252336 Jy ! Clean residual min=-0.010817 max=0.012538 Jy/beam ! Clean residual mean=0.000151 rms=0.003735 Jy/beam ! Combined flux in latest and established models = 0.658429 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.658429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.983 mas, bmaj=28.07 mas, bpa=4.375 degrees ! Estimated noise=2.33252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103974 Jy ! Component: 100 - total flux cleaned = 0.00138036 Jy ! Component: 150 - total flux cleaned = 0.00153693 Jy ! Component: 200 - total flux cleaned = 0.00168349 Jy ! Total flux subtracted in 200 components = 0.00168349 Jy ! Clean residual min=-0.011787 max=0.011429 Jy/beam ! Clean residual mean=0.000206 rms=0.004166 Jy/beam ! Combined flux in latest and established models = 0.660112 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.660112 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=17 mas, bpa=-13.9 degrees ! Estimated noise=2.03447 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192498 Jy ! Component: 100 - total flux cleaned = 0.000802418 Jy ! Component: 150 - total flux cleaned = 0.0011971 Jy ! Component: 200 - total flux cleaned = 0.00155338 Jy ! Total flux subtracted in 200 components = 0.00155338 Jy ! Clean residual min=-0.010057 max=0.012442 Jy/beam ! Clean residual mean=0.000134 rms=0.003560 Jy/beam ! Combined flux in latest and established models = 0.661666 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.661666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108964Jy sigma=1.175217 ! Fit after self-cal, rms=0.108958Jy sigma=1.174955 wmodel J0539-2839_S_2004_04_30_yyk\_map.mod ! Writing 82 model components to file: J0539-2839_S_2004_04_30_yyk_map.mod wobs J0539-2839_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0539-2839_S_2004_04_30_yyk_uvs.fits wwins J0539-2839_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0539-2839_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545482 Jy ! Component: 100 - total flux cleaned = 0.00640176 Jy ! Component: 150 - total flux cleaned = 0.00675413 Jy ! Component: 200 - total flux cleaned = 0.00612604 Jy ! Component: 250 - total flux cleaned = 0.00537626 Jy ! Component: 300 - total flux cleaned = 0.00438676 Jy ! Component: 350 - total flux cleaned = 0.00371787 Jy ! Component: 400 - total flux cleaned = 0.00321507 Jy ! Component: 450 - total flux cleaned = 0.00261383 Jy ! Component: 500 - total flux cleaned = 0.00226568 Jy ! Component: 550 - total flux cleaned = 0.00204365 Jy ! Component: 600 - total flux cleaned = 0.00193814 Jy ! Component: 650 - total flux cleaned = 0.00183392 Jy ! Component: 700 - total flux cleaned = 0.00183391 Jy ! Component: 750 - total flux cleaned = 0.00153791 Jy ! Component: 800 - total flux cleaned = 0.00134687 Jy ! Component: 850 - total flux cleaned = 0.00125434 Jy ! Component: 900 - total flux cleaned = 0.0013434 Jy ! Component: 950 - total flux cleaned = 0.00107958 Jy ! Component: 1000 - total flux cleaned = 0.00107896 Jy ! Component: 1050 - total flux cleaned = 0.000830018 Jy ! Component: 1100 - total flux cleaned = 0.00026453 Jy ! Component: 1150 - total flux cleaned = 0.000107541 Jy ! Component: 1200 - total flux cleaned = 0.000108878 Jy ! Component: 1250 - total flux cleaned = -0.000118661 Jy ! Component: 1300 - total flux cleaned = -0.000267932 Jy ! Component: 1350 - total flux cleaned = -0.000414095 Jy ! Component: 1400 - total flux cleaned = -0.000558586 Jy ! Component: 1450 - total flux cleaned = -0.00091129 Jy ! Component: 1500 - total flux cleaned = -0.00132575 Jy ! Component: 1550 - total flux cleaned = -0.00146222 Jy ! Component: 1600 - total flux cleaned = -0.00173034 Jy ! Component: 1650 - total flux cleaned = -0.00186167 Jy ! Component: 1700 - total flux cleaned = -0.00218506 Jy ! Component: 1750 - total flux cleaned = -0.00224829 Jy ! Component: 1800 - total flux cleaned = -0.00243629 Jy ! Component: 1850 - total flux cleaned = -0.00255954 Jy ! Component: 1900 - total flux cleaned = -0.00268065 Jy ! Component: 1950 - total flux cleaned = -0.00285979 Jy ! Component: 2000 - total flux cleaned = -0.00303506 Jy ! Total flux subtracted in 2048 components = -0.00320867 Jy ! Clean residual min=-0.004051 max=0.003225 Jy/beam ! Clean residual mean=0.000005 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.658457 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 219 components and 0.658457 Jy ![Exited script file: muppet] wmap "J0539-2839_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.934 x 17 at -13.9 degrees (North through East) ! Clean map min=-0.0084435 max=0.54515 Jy/beam ! Writing clean map to FITS file: J0539-2839_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.545154 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00119448 device "J0539-2839_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0539-2839_S_2004_04_30_yyk_map.eps/VPS' loglevs 8*100*3*image_rms/peak_flux ! The new contour levels are: ! -5.25862 5.25862 10.5172 21.0345 42.069 84.1379 print "clev=",int(8*3*image_rms*10000)/10000 ! clev= 0.0286 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.545 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.934 x 17 at -13.9 degrees (North through East) ! Clean map min=-0.0084435 max=0.54515 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0539-2839_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0539-2839_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0539-2839_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:01:36 2005