! Started logfile: J0406-3826_S_2004_05_27_yyk_uvs.log on Tue Dec 6 23:57:37 2005 obs J0406-3826_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0406-3826_S_2004_05_27_yyk_uve.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.70719 visibilities/baseline/integration-bin. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 2164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0406-3826_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.942948 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.195755Jy sigma=2.151102 ! Fit after self-cal, rms=0.195290Jy sigma=2.145389 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.137 mas, bmaj=6.11 mas, bpa=1.077 degrees ! Estimated noise=2.29302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.778076 Jy ! Component: 100 - total flux cleaned = 0.899528 Jy ! Total flux subtracted in 100 components = 0.899528 Jy ! Clean residual min=-0.038719 max=0.048763 Jy/beam ! Clean residual mean=0.000203 rms=0.008330 Jy/beam ! Combined flux in latest and established models = 0.899527 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.899527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177886Jy sigma=2.092919 ! Fit after self-cal, rms=0.177773Jy sigma=2.092256 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=8.062 mas, bpa=-0.4125 degrees ! Estimated noise=1.44275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0736514 Jy ! Component: 100 - total flux cleaned = 0.0952467 Jy ! Component: 150 - total flux cleaned = 0.100388 Jy ! Component: 200 - total flux cleaned = 0.100796 Jy ! Total flux subtracted in 200 components = 0.100796 Jy ! Clean residual min=-0.024736 max=0.031824 Jy/beam ! Clean residual mean=-0.000053 rms=0.007856 Jy/beam ! Combined flux in latest and established models = 1.00032 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 1.00032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165305Jy sigma=1.825959 ! Fit after self-cal, rms=0.165186Jy sigma=1.825196 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.165186Jy sigma=1.825196 ! Fit after self-cal, rms=0.164769Jy sigma=1.820721 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164769Jy sigma=1.820721 ! Fit after self-cal, rms=0.164768Jy sigma=1.820674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=8.062 mas, bpa=-0.3783 degrees ! Estimated noise=1.44354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831999 Jy ! Component: 100 - total flux cleaned = 0.000261093 Jy ! Component: 150 - total flux cleaned = 0.000254653 Jy ! Component: 200 - total flux cleaned = 0.000402257 Jy ! Total flux subtracted in 200 components = 0.000402257 Jy ! Clean residual min=-0.024761 max=0.031185 Jy/beam ! Clean residual mean=-0.000056 rms=0.007833 Jy/beam ! Combined flux in latest and established models = 1.00073 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 1.00073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164412Jy sigma=1.816800 ! Fit after self-cal, rms=0.164355Jy sigma=1.816452 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164355Jy sigma=1.816452 ! Fit after self-cal, rms=0.161982Jy sigma=1.789121 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839425 Jy ! Component: 100 - total flux cleaned = 0.000432969 Jy ! Component: 150 - total flux cleaned = 0.000429752 Jy ! Component: 200 - total flux cleaned = 0.000546178 Jy ! Total flux subtracted in 200 components = 0.000546178 Jy ! Clean residual min=-0.024468 max=0.031531 Jy/beam ! Clean residual mean=-0.000057 rms=0.007797 Jy/beam ! Combined flux in latest and established models = 1.00127 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 1.00127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161811Jy sigma=1.786968 ! Fit after self-cal, rms=0.161658Jy sigma=1.785040 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.923 x 8.062 at -0.3783 degrees (North through East) ! Clean map min=-0.023648 max=0.94009 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161658Jy sigma=1.785040 ! Fit after self-cal, rms=0.161268Jy sigma=1.797451 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161268Jy sigma=1.797451 ! Fit after self-cal, rms=0.161261Jy sigma=1.797137 ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=8.037 mas, bpa=-0.4019 degrees ! Estimated noise=1.43931 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195336 Jy ! Component: 100 - total flux cleaned = 0.000683076 Jy ! Component: 150 - total flux cleaned = 0.00108671 Jy ! Component: 200 - total flux cleaned = 0.00132199 Jy ! Total flux subtracted in 200 components = 0.00132199 Jy ! Clean residual min=-0.023299 max=0.028814 Jy/beam ! Clean residual mean=0.000047 rms=0.007437 Jy/beam ! Combined flux in latest and established models = 1.00259 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 1.00259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160893Jy sigma=1.794186 ! Fit after self-cal, rms=0.160878Jy sigma=1.794031 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160878Jy sigma=1.794031 ! Fit after self-cal, rms=0.150245Jy sigma=1.663144 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150245Jy sigma=1.663144 ! Fit after self-cal, rms=0.150253Jy sigma=1.663014 ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=8.008 mas, bpa=-0.3829 degrees ! Estimated noise=1.42908 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00351267 Jy ! Component: 100 - total flux cleaned = -0.00309821 Jy ! Component: 150 - total flux cleaned = -0.00287964 Jy ! Component: 200 - total flux cleaned = -0.0026956 Jy ! Total flux subtracted in 200 components = -0.0026956 Jy ! Clean residual min=-0.020744 max=0.021390 Jy/beam ! Clean residual mean=0.000360 rms=0.006170 Jy/beam ! Combined flux in latest and established models = 0.999899 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.999899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149710Jy sigma=1.659736 ! Fit after self-cal, rms=0.149693Jy sigma=1.659621 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.041 mas, bmaj=29.25 mas, bpa=3.887 degrees ! Estimated noise=1.88963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00713178 Jy ! Component: 100 - total flux cleaned = 0.00725493 Jy ! Component: 150 - total flux cleaned = 0.00737607 Jy ! Component: 200 - total flux cleaned = 0.00749536 Jy ! Total flux subtracted in 200 components = 0.00749536 Jy ! Clean residual min=-0.023902 max=0.028001 Jy/beam ! Clean residual mean=0.000637 rms=0.009435 Jy/beam ! Combined flux in latest and established models = 1.00739 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 1.00739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150136Jy sigma=1.663312 ! Fit after self-cal, rms=0.150103Jy sigma=1.662878 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.132 mas, bmaj=6.103 mas, bpa=1.151 degrees ! Estimated noise=2.26997 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.770545 Jy ! Component: 100 - total flux cleaned = 0.894212 Jy ! Component: 150 - total flux cleaned = 0.944188 Jy ! Component: 200 - total flux cleaned = 0.968429 Jy ! Total flux subtracted in 200 components = 0.968429 Jy ! Clean residual min=-0.021770 max=0.027042 Jy/beam ! Clean residual mean=0.000229 rms=0.006213 Jy/beam ! Combined flux in latest and established models = 0.968429 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.968429 Jy ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=8.008 mas, bpa=-0.3829 degrees ! Estimated noise=1.42908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236255 Jy ! Component: 100 - total flux cleaned = 0.0304808 Jy ! Component: 150 - total flux cleaned = 0.0308188 Jy ! Component: 200 - total flux cleaned = 0.0309676 Jy ! Total flux subtracted in 200 components = 0.0309676 Jy ! Clean residual min=-0.020805 max=0.022640 Jy/beam ! Clean residual mean=0.000363 rms=0.006211 Jy/beam ! Combined flux in latest and established models = 0.999397 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.999397 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.041 mas, bmaj=29.25 mas, bpa=3.887 degrees ! Estimated noise=1.88963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760182 Jy ! Component: 100 - total flux cleaned = 0.00758675 Jy ! Component: 150 - total flux cleaned = 0.00758515 Jy ! Component: 200 - total flux cleaned = 0.0077019 Jy ! Total flux subtracted in 200 components = 0.0077019 Jy ! Clean residual min=-0.024008 max=0.028199 Jy/beam ! Clean residual mean=0.000641 rms=0.009465 Jy/beam ! Combined flux in latest and established models = 1.0071 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 24 components and 1.0071 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=8.008 mas, bpa=-0.3829 degrees ! Estimated noise=1.42908 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00692059 Jy ! Component: 100 - total flux cleaned = -0.00729477 Jy ! Component: 150 - total flux cleaned = -0.00718253 Jy ! Component: 200 - total flux cleaned = -0.00708037 Jy ! Total flux subtracted in 200 components = -0.00708037 Jy ! Clean residual min=-0.020816 max=0.021945 Jy/beam ! Clean residual mean=0.000360 rms=0.006180 Jy/beam ! Combined flux in latest and established models = 1.00002 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 1.00002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149778Jy sigma=1.661057 ! Fit after self-cal, rms=0.149747Jy sigma=1.660825 wmodel J0406-3826_S_2004_05_27_yyk\_map.mod ! Writing 34 model components to file: J0406-3826_S_2004_05_27_yyk_map.mod wobs J0406-3826_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0406-3826_S_2004_05_27_yyk_uvs.fits wwins J0406-3826_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J0406-3826_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479898 Jy ! Component: 100 - total flux cleaned = 0.00514878 Jy ! Component: 150 - total flux cleaned = 0.00516273 Jy ! Component: 200 - total flux cleaned = 0.00433912 Jy ! Component: 250 - total flux cleaned = 0.00484725 Jy ! Component: 300 - total flux cleaned = 0.00557644 Jy ! Component: 350 - total flux cleaned = 0.00674281 Jy ! Component: 400 - total flux cleaned = 0.00830739 Jy ! Component: 450 - total flux cleaned = 0.00960338 Jy ! Component: 500 - total flux cleaned = 0.0112727 Jy ! Component: 550 - total flux cleaned = 0.0122844 Jy ! Component: 600 - total flux cleaned = 0.0134652 Jy ! Component: 650 - total flux cleaned = 0.0146167 Jy ! Component: 700 - total flux cleaned = 0.0157403 Jy ! Component: 750 - total flux cleaned = 0.0170207 Jy ! Component: 800 - total flux cleaned = 0.0180949 Jy ! Component: 850 - total flux cleaned = 0.0187959 Jy ! Component: 900 - total flux cleaned = 0.0196559 Jy ! Component: 950 - total flux cleaned = 0.0204976 Jy ! Component: 1000 - total flux cleaned = 0.021161 Jy ! Component: 1050 - total flux cleaned = 0.0219795 Jy ! Component: 1100 - total flux cleaned = 0.0227812 Jy ! Component: 1150 - total flux cleaned = 0.0232559 Jy ! Component: 1200 - total flux cleaned = 0.024038 Jy ! Component: 1250 - total flux cleaned = 0.0248081 Jy ! Component: 1300 - total flux cleaned = 0.025415 Jy ! Component: 1350 - total flux cleaned = 0.025864 Jy ! Component: 1400 - total flux cleaned = 0.0263102 Jy ! Component: 1450 - total flux cleaned = 0.0270423 Jy ! Component: 1500 - total flux cleaned = 0.0277615 Jy ! Component: 1550 - total flux cleaned = 0.0280446 Jy ! Component: 1600 - total flux cleaned = 0.0286079 Jy ! Component: 1650 - total flux cleaned = 0.0291623 Jy ! Component: 1700 - total flux cleaned = 0.0294363 Jy ! Component: 1750 - total flux cleaned = 0.0299775 Jy ! Component: 1800 - total flux cleaned = 0.0305129 Jy ! Component: 1850 - total flux cleaned = 0.0311748 Jy ! Component: 1900 - total flux cleaned = 0.0315678 Jy ! Component: 1950 - total flux cleaned = 0.0322143 Jy ! Component: 2000 - total flux cleaned = 0.0327269 Jy ! Total flux subtracted in 2048 components = 0.0334899 Jy ! Clean residual min=-0.006972 max=0.006740 Jy/beam ! Clean residual mean=0.000092 rms=0.002919 Jy/beam ! Combined flux in latest and established models = 1.03351 Jy keep ! Adding 156 model components to the UV plane model. ! The established model now contains 189 components and 1.03351 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.9 x 8.008 at -0.3829 degrees (North through East) ! Clean map min=-0.012155 max=0.91768 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.917675 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0028915 device "J0406-3826_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0406-3826_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.94527 0.94527 1.89054 3.78108 7.56216 15.1243 30.2486 60.4973 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0086 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.917 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.9 x 8.008 at -0.3829 degrees (North through East) ! Clean map min=-0.012155 max=0.91768 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0406-3826_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0406-3826_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0406-3826_S_2004_05_27_yyk_uvs.log closed on Tue Dec 6 23:57:41 2005