! Started logfile: J0402-3147_S_2004_04_30_yyk_uvs.log on Wed Dec 7 01:01:28 2005 obs J0402-3147_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0402-3147_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J0402-3147 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1627 lines of history. ! ! Reading 448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0402-3147_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.510427 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.513267Jy sigma=7.918261 ! Fit after self-cal, rms=0.513179Jy sigma=7.916806 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=18.44 mas, bpa=-21.41 degrees ! Estimated noise=2.81517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.416082 Jy ! Component: 100 - total flux cleaned = 0.480301 Jy ! Total flux subtracted in 100 components = 0.480301 Jy ! Clean residual min=-0.018180 max=0.020323 Jy/beam ! Clean residual mean=0.000225 rms=0.006580 Jy/beam ! Combined flux in latest and established models = 0.480301 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.480301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110329Jy sigma=1.537824 ! Fit after self-cal, rms=0.110329Jy sigma=1.537745 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=20.36 mas, bpa=-20.15 degrees ! Estimated noise=2.22835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395707 Jy ! Component: 100 - total flux cleaned = 0.0596046 Jy ! Component: 150 - total flux cleaned = 0.0716991 Jy ! Component: 200 - total flux cleaned = 0.079181 Jy ! Total flux subtracted in 200 components = 0.079181 Jy ! Clean residual min=-0.017030 max=0.014840 Jy/beam ! Clean residual mean=-0.000242 rms=0.005120 Jy/beam ! Combined flux in latest and established models = 0.559482 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 67 components and 0.559482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096850Jy sigma=1.353880 ! Fit after self-cal, rms=0.096819Jy sigma=1.353720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.98143 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.00* KP 0.94 ! LA 1.13 MK 1.03 NL 1.10 OV 0.95 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983014 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.00* KP 0.98 ! LA 1.12 MK 1.04 NL 1.02 OV 1.01 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.986717 ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.86 HN 1.00* KP 0.95 ! LA 0.96 MK 1.05 NL 1.09 OV 0.99 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.096819Jy sigma=1.353720 ! Fit after self-cal, rms=0.088680Jy sigma=1.183767 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088680Jy sigma=1.183767 ! Fit after self-cal, rms=0.088675Jy sigma=1.183719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=20.74 mas, bpa=-20.03 degrees ! Estimated noise=2.23233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000913128 Jy ! Component: 100 - total flux cleaned = -0.00116563 Jy ! Component: 150 - total flux cleaned = -0.00116801 Jy ! Component: 200 - total flux cleaned = -0.00116587 Jy ! Total flux subtracted in 200 components = -0.00116587 Jy ! Clean residual min=-0.007041 max=0.006845 Jy/beam ! Clean residual mean=0.000233 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.558316 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.558316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088350Jy sigma=1.179446 ! Fit after self-cal, rms=0.088345Jy sigma=1.179407 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088345Jy sigma=1.179407 ! Fit after self-cal, rms=0.087108Jy sigma=1.154863 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215412 Jy ! Component: 100 - total flux cleaned = 0.000212718 Jy ! Component: 150 - total flux cleaned = 0.000211935 Jy ! Component: 200 - total flux cleaned = 0.00029274 Jy ! Total flux subtracted in 200 components = 0.00029274 Jy ! Clean residual min=-0.006942 max=0.006458 Jy/beam ! Clean residual mean=0.000228 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.558608 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.558608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086909Jy sigma=1.152714 ! Fit after self-cal, rms=0.086864Jy sigma=1.151262 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 20.74 at -20.03 degrees (North through East) ! Clean map min=-0.0068956 max=0.45611 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086864Jy sigma=1.151262 ! Fit after self-cal, rms=0.086762Jy sigma=1.126982 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086762Jy sigma=1.126982 ! Fit after self-cal, rms=0.086768Jy sigma=1.126876 ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=20.73 mas, bpa=-20.01 degrees ! Estimated noise=2.29657 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125653 Jy ! Component: 100 - total flux cleaned = 0.0157114 Jy ! Component: 150 - total flux cleaned = 0.0160944 Jy ! Component: 200 - total flux cleaned = 0.0161667 Jy ! Total flux subtracted in 200 components = 0.0161667 Jy ! Clean residual min=-0.006896 max=0.006502 Jy/beam ! Clean residual mean=0.000264 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.574775 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.574775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084631Jy sigma=1.105349 ! Fit after self-cal, rms=0.084625Jy sigma=1.105327 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084625Jy sigma=1.105327 ! Fit after self-cal, rms=0.084141Jy sigma=1.076467 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084141Jy sigma=1.076467 ! Fit after self-cal, rms=0.084143Jy sigma=1.076464 ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=20.72 mas, bpa=-20 degrees ! Estimated noise=2.35174 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110171 Jy ! Component: 100 - total flux cleaned = 0.0139922 Jy ! Component: 150 - total flux cleaned = 0.0143765 Jy ! Component: 200 - total flux cleaned = 0.0144895 Jy ! Total flux subtracted in 200 components = 0.0144895 Jy ! Clean residual min=-0.007005 max=0.006983 Jy/beam ! Clean residual mean=0.000299 rms=0.002322 Jy/beam ! Combined flux in latest and established models = 0.589265 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 0.589265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082576Jy sigma=1.059748 ! Fit after self-cal, rms=0.082572Jy sigma=1.059737 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.1 mas, bmaj=29.53 mas, bpa=0.3392 degrees ! Estimated noise=2.70615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045998 Jy ! Component: 100 - total flux cleaned = 0.0005395 Jy ! Component: 150 - total flux cleaned = 0.000614316 Jy ! Component: 200 - total flux cleaned = 0.000719114 Jy ! Total flux subtracted in 200 components = 0.000719114 Jy ! Clean residual min=-0.007038 max=0.007730 Jy/beam ! Clean residual mean=0.000433 rms=0.002830 Jy/beam ! Combined flux in latest and established models = 0.589984 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 142 components and 0.589984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082540Jy sigma=1.059668 ! Fit after self-cal, rms=0.082539Jy sigma=1.059652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=18.63 mas, bpa=-21.37 degrees ! Estimated noise=3.00195 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.44396 Jy ! Component: 100 - total flux cleaned = 0.507326 Jy ! Component: 150 - total flux cleaned = 0.53148 Jy ! Component: 200 - total flux cleaned = 0.547097 Jy ! Total flux subtracted in 200 components = 0.547098 Jy ! Clean residual min=-0.010035 max=0.011401 Jy/beam ! Clean residual mean=0.000465 rms=0.003591 Jy/beam ! Combined flux in latest and established models = 0.547097 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.547097 Jy ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=20.72 mas, bpa=-20 degrees ! Estimated noise=2.35174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186447 Jy ! Component: 100 - total flux cleaned = 0.0281949 Jy ! Component: 150 - total flux cleaned = 0.0337022 Jy ! Component: 200 - total flux cleaned = 0.0358993 Jy ! Total flux subtracted in 200 components = 0.0358993 Jy ! Clean residual min=-0.007332 max=0.007059 Jy/beam ! Clean residual mean=0.000342 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.582996 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 73 components and 0.582996 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.1 mas, bmaj=29.53 mas, bpa=0.3392 degrees ! Estimated noise=2.70615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232077 Jy ! Component: 100 - total flux cleaned = 0.00294328 Jy ! Component: 150 - total flux cleaned = 0.00351029 Jy ! Component: 200 - total flux cleaned = 0.00394986 Jy ! Total flux subtracted in 200 components = 0.00394986 Jy ! Clean residual min=-0.006515 max=0.007203 Jy/beam ! Clean residual mean=0.000494 rms=0.002933 Jy/beam ! Combined flux in latest and established models = 0.586946 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 0.586946 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=20.72 mas, bpa=-20 degrees ! Estimated noise=2.35174 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000507014 Jy ! Component: 100 - total flux cleaned = -0.000328299 Jy ! Component: 150 - total flux cleaned = -8.93431e-05 Jy ! Component: 200 - total flux cleaned = 6.18317e-05 Jy ! Total flux subtracted in 200 components = 6.18317e-05 Jy ! Clean residual min=-0.007246 max=0.006827 Jy/beam ! Clean residual mean=0.000322 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 0.587008 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.587008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082854Jy sigma=1.062876 ! Fit after self-cal, rms=0.082833Jy sigma=1.062828 wmodel J0402-3147_S_2004_04_30_yyk\_map.mod ! Writing 91 model components to file: J0402-3147_S_2004_04_30_yyk_map.mod wobs J0402-3147_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0402-3147_S_2004_04_30_yyk_uvs.fits wwins J0402-3147_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0402-3147_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109773 Jy ! Component: 100 - total flux cleaned = -0.000643327 Jy ! Component: 150 - total flux cleaned = -0.000119203 Jy ! Component: 200 - total flux cleaned = 0.000768814 Jy ! Component: 250 - total flux cleaned = 0.00187783 Jy ! Component: 300 - total flux cleaned = 0.00283302 Jy ! Component: 350 - total flux cleaned = 0.00382026 Jy ! Component: 400 - total flux cleaned = 0.00499917 Jy ! Component: 450 - total flux cleaned = 0.00598049 Jy ! Component: 500 - total flux cleaned = 0.00656351 Jy ! Component: 550 - total flux cleaned = 0.00663435 Jy ! Component: 600 - total flux cleaned = 0.00663592 Jy ! Component: 650 - total flux cleaned = 0.0066365 Jy ! Component: 700 - total flux cleaned = 0.00670106 Jy ! Component: 750 - total flux cleaned = 0.00669876 Jy ! Component: 800 - total flux cleaned = 0.00657588 Jy ! Component: 850 - total flux cleaned = 0.0065759 Jy ! Component: 900 - total flux cleaned = 0.0066327 Jy ! Component: 950 - total flux cleaned = 0.00680036 Jy ! Component: 1000 - total flux cleaned = 0.00668847 Jy ! Component: 1050 - total flux cleaned = 0.0066874 Jy ! Component: 1100 - total flux cleaned = 0.00673831 Jy ! Component: 1150 - total flux cleaned = 0.00673729 Jy ! Component: 1200 - total flux cleaned = 0.00663558 Jy ! Component: 1250 - total flux cleaned = 0.00673507 Jy ! Component: 1300 - total flux cleaned = 0.00678349 Jy ! Component: 1350 - total flux cleaned = 0.00673528 Jy ! Component: 1400 - total flux cleaned = 0.00683044 Jy ! Component: 1450 - total flux cleaned = 0.00687736 Jy ! Component: 1500 - total flux cleaned = 0.00696948 Jy ! Component: 1550 - total flux cleaned = 0.00701408 Jy ! Component: 1600 - total flux cleaned = 0.0070596 Jy ! Component: 1650 - total flux cleaned = 0.00719238 Jy ! Component: 1700 - total flux cleaned = 0.00723656 Jy ! Component: 1750 - total flux cleaned = 0.00736581 Jy ! Component: 1800 - total flux cleaned = 0.0073661 Jy ! Component: 1850 - total flux cleaned = 0.00736575 Jy ! Component: 1900 - total flux cleaned = 0.00740712 Jy ! Component: 1950 - total flux cleaned = 0.00724316 Jy ! Component: 2000 - total flux cleaned = 0.00724334 Jy ! Total flux subtracted in 2048 components = 0.00720359 Jy ! Clean residual min=-0.002572 max=0.002693 Jy/beam ! Clean residual mean=0.000052 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.594212 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 218 components and 0.594212 Jy ![Exited script file: muppet] wmap "J0402-3147_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 20.72 at -20 degrees (North through East) ! Clean map min=-0.0064548 max=0.4848 Jy/beam ! Writing clean map to FITS file: J0402-3147_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.484799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000858265 device "J0402-3147_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0402-3147_S_2004_04_30_yyk_map.eps/VPS' loglevs 8*100*3*image_rms/peak_flux ! The new contour levels are: ! -4.24884 4.24884 8.49769 16.9954 33.9908 67.9815 print "clev=",int(8*3*image_rms*10000)/10000 ! clev= 0.0205 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.484 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 20.72 at -20 degrees (North through East) ! Clean map min=-0.0064548 max=0.4848 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0402-3147_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0402-3147_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0402-3147_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:01:32 2005