! Started logfile: J0321-0526_X_2004_05_27_yyk_uvs.log on Tue Dec 6 23:57:14 2005 obs J0321-0526_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0321-0526_X_2004_05_27_yyk_uve.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0321-0526 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1378 lines of history. ! ! Reading 1260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0321-0526_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.197489 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.826359Jy sigma=15.335563 ! Fit after self-cal, rms=0.826354Jy sigma=15.325635 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7274 mas, bmaj=1.793 mas, bpa=-0.5195 degrees ! Estimated noise=1.40234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.152006 Jy ! Component: 100 - total flux cleaned = 0.180984 Jy ! Total flux subtracted in 100 components = 0.180984 Jy ! Clean residual min=-0.007125 max=0.008388 Jy/beam ! Clean residual mean=-0.000012 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.180984 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.180984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083424Jy sigma=1.187500 ! Fit after self-cal, rms=0.083418Jy sigma=1.187408 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8989 mas, bmaj=2.094 mas, bpa=-0.7857 degrees ! Estimated noise=1.0725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114641 Jy ! Component: 100 - total flux cleaned = 0.0155825 Jy ! Component: 150 - total flux cleaned = 0.0168188 Jy ! Component: 200 - total flux cleaned = 0.0170613 Jy ! Total flux subtracted in 200 components = 0.0170613 Jy ! Clean residual min=-0.005760 max=0.006389 Jy/beam ! Clean residual mean=0.000022 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.198045 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 0.198045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082531Jy sigma=1.162861 ! Fit after self-cal, rms=0.082528Jy sigma=1.162759 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01965 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.03 KP 0.96 ! LA 0.96 MK 0.93 NL 1.02 OV 0.99 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.999746 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.95 KP 0.92 ! LA 0.90 MK 1.13 NL 1.04 OV 1.02 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.986823 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 0.88 KP 0.89 ! LA 1.00 MK 1.13 NL 0.97 OV 1.03 ! PT 1.14 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.98951 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.94 KP 0.91 ! LA 1.08 MK 0.98 NL 0.97 OV 1.10 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.082528Jy sigma=1.162759 ! Fit after self-cal, rms=0.081313Jy sigma=1.130000 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081313Jy sigma=1.130000 ! Fit after self-cal, rms=0.081280Jy sigma=1.129897 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9074 mas, bmaj=2.116 mas, bpa=-0.7008 degrees ! Estimated noise=1.07111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429283 Jy ! Component: 100 - total flux cleaned = -0.000398691 Jy ! Component: 150 - total flux cleaned = -0.000368112 Jy ! Component: 200 - total flux cleaned = -0.000366318 Jy ! Total flux subtracted in 200 components = -0.000366318 Jy ! Clean residual min=-0.004929 max=0.005773 Jy/beam ! Clean residual mean=0.000016 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.197679 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.197679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081293Jy sigma=1.129286 ! Fit after self-cal, rms=0.081290Jy sigma=1.129252 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081290Jy sigma=1.129252 ! Fit after self-cal, rms=0.080410Jy sigma=1.037133 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, -21.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620089 Jy ! Component: 100 - total flux cleaned = 0.00703487 Jy ! Component: 150 - total flux cleaned = 0.0073735 Jy ! Component: 200 - total flux cleaned = 0.00756691 Jy ! Total flux subtracted in 200 components = 0.00756691 Jy ! Clean residual min=-0.003843 max=0.004728 Jy/beam ! Clean residual mean=0.000014 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.205246 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 0.205246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080116Jy sigma=1.025931 ! Fit after self-cal, rms=0.080988Jy sigma=1.016545 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9074 x 2.116 at -0.7008 degrees (North through East) ! Clean map min=-0.0032333 max=0.18027 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080988Jy sigma=1.016545 ! Fit after self-cal, rms=0.080816Jy sigma=0.999909 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080816Jy sigma=0.999909 ! Fit after self-cal, rms=0.081275Jy sigma=0.998573 ! Inverting map and beam ! Estimated beam: bmin=0.9125 mas, bmaj=2.115 mas, bpa=-0.3888 degrees ! Estimated noise=1.06552 mJy/beam. ! Added new window around map position (-3.4, 23.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495076 Jy ! Component: 100 - total flux cleaned = 0.00778615 Jy ! Component: 150 - total flux cleaned = 0.00851109 Jy ! Component: 200 - total flux cleaned = 0.00904957 Jy ! Total flux subtracted in 200 components = 0.00904957 Jy ! Clean residual min=-0.003275 max=0.003522 Jy/beam ! Clean residual mean=0.000004 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.214295 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.214295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080853Jy sigma=0.991163 ! Fit after self-cal, rms=0.080919Jy sigma=0.990514 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080919Jy sigma=0.990514 ! Fit after self-cal, rms=0.082229Jy sigma=0.995944 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082229Jy sigma=0.995944 ! Fit after self-cal, rms=0.082323Jy sigma=0.995830 ! Inverting map and beam ! Estimated beam: bmin=0.922 mas, bmaj=2.146 mas, bpa=0.7795 degrees ! Estimated noise=1.06971 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425222 Jy ! Component: 100 - total flux cleaned = 0.000697224 Jy ! Component: 150 - total flux cleaned = 0.000860688 Jy ! Component: 200 - total flux cleaned = 0.0010816 Jy ! Total flux subtracted in 200 components = 0.0010816 Jy ! Clean residual min=-0.003431 max=0.003793 Jy/beam ! Clean residual mean=0.000007 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.215377 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 99 components and 0.215377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082211Jy sigma=0.992170 ! Fit after self-cal, rms=0.082208Jy sigma=0.992031 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=3.723 mas, bpa=-2.479 degrees ! Estimated noise=1.37118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451863 Jy ! Component: 100 - total flux cleaned = 0.000503685 Jy ! Component: 150 - total flux cleaned = 0.000591848 Jy ! Component: 200 - total flux cleaned = 0.000629205 Jy ! Total flux subtracted in 200 components = 0.000629205 Jy ! Clean residual min=-0.004163 max=0.004288 Jy/beam ! Clean residual mean=0.000013 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.216006 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.216006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082203Jy sigma=0.991975 ! Fit after self-cal, rms=0.082202Jy sigma=0.991936 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7373 mas, bmaj=1.812 mas, bpa=0.03683 degrees ! Estimated noise=1.40486 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.15311 Jy ! Component: 100 - total flux cleaned = 0.180077 Jy ! Component: 150 - total flux cleaned = 0.191358 Jy ! Component: 200 - total flux cleaned = 0.198986 Jy ! Total flux subtracted in 200 components = 0.198986 Jy ! Clean residual min=-0.004820 max=0.005278 Jy/beam ! Clean residual mean=-0.000000 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.198986 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.198986 Jy ! Inverting map and beam ! Estimated beam: bmin=0.922 mas, bmaj=2.146 mas, bpa=0.7795 degrees ! Estimated noise=1.06971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609399 Jy ! Component: 100 - total flux cleaned = 0.0101557 Jy ! Component: 150 - total flux cleaned = 0.0127608 Jy ! Component: 200 - total flux cleaned = 0.0136483 Jy ! Total flux subtracted in 200 components = 0.0136483 Jy ! Clean residual min=-0.003541 max=0.003801 Jy/beam ! Clean residual mean=0.000005 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.212634 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.212634 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=3.723 mas, bpa=-2.479 degrees ! Estimated noise=1.37118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188971 Jy ! Component: 100 - total flux cleaned = 0.00201422 Jy ! Component: 150 - total flux cleaned = 0.0022413 Jy ! Component: 200 - total flux cleaned = 0.00233834 Jy ! Total flux subtracted in 200 components = 0.00233834 Jy ! Clean residual min=-0.004195 max=0.004392 Jy/beam ! Clean residual mean=0.000011 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.214973 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.214973 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.922 mas, bmaj=2.146 mas, bpa=0.7795 degrees ! Estimated noise=1.06971 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000636853 Jy ! Component: 100 - total flux cleaned = -0.000632439 Jy ! Component: 150 - total flux cleaned = -0.000473065 Jy ! Component: 200 - total flux cleaned = -0.000400789 Jy ! Total flux subtracted in 200 components = -0.000400789 Jy ! Clean residual min=-0.003511 max=0.003749 Jy/beam ! Clean residual mean=0.000004 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.214572 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.214572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082280Jy sigma=0.992561 ! Fit after self-cal, rms=0.082319Jy sigma=0.992359 wmodel J0321-0526_X_2004_05_27_yyk\_map.mod ! Writing 82 model components to file: J0321-0526_X_2004_05_27_yyk_map.mod wobs J0321-0526_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0321-0526_X_2004_05_27_yyk_uvs.fits wwins J0321-0526_X_2004_05_27_yyk\_map.win ! wwins: Wrote 3 windows to J0321-0526_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111583 Jy ! Component: 100 - total flux cleaned = 0.00193388 Jy ! Component: 150 - total flux cleaned = 0.00264191 Jy ! Component: 200 - total flux cleaned = 0.00331071 Jy ! Component: 250 - total flux cleaned = 0.00378778 Jy ! Component: 300 - total flux cleaned = 0.00399258 Jy ! Component: 350 - total flux cleaned = 0.00429 Jy ! Component: 400 - total flux cleaned = 0.00462488 Jy ! Component: 450 - total flux cleaned = 0.00495118 Jy ! Component: 500 - total flux cleaned = 0.00527032 Jy ! Component: 550 - total flux cleaned = 0.00536 Jy ! Component: 600 - total flux cleaned = 0.00557741 Jy ! Component: 650 - total flux cleaned = 0.00561948 Jy ! Component: 700 - total flux cleaned = 0.00570259 Jy ! Component: 750 - total flux cleaned = 0.0057845 Jy ! Component: 800 - total flux cleaned = 0.00594579 Jy ! Component: 850 - total flux cleaned = 0.00606505 Jy ! Component: 900 - total flux cleaned = 0.00633686 Jy ! Component: 950 - total flux cleaned = 0.00652826 Jy ! Component: 1000 - total flux cleaned = 0.00671646 Jy ! Component: 1050 - total flux cleaned = 0.00693842 Jy ! Component: 1100 - total flux cleaned = 0.0069748 Jy ! Component: 1150 - total flux cleaned = 0.00708277 Jy ! Component: 1200 - total flux cleaned = 0.00722494 Jy ! Component: 1250 - total flux cleaned = 0.00736525 Jy ! Component: 1300 - total flux cleaned = 0.00750313 Jy ! Component: 1350 - total flux cleaned = 0.00753752 Jy ! Component: 1400 - total flux cleaned = 0.00767268 Jy ! Component: 1450 - total flux cleaned = 0.00780632 Jy ! Component: 1500 - total flux cleaned = 0.00803606 Jy ! Component: 1550 - total flux cleaned = 0.00800333 Jy ! Component: 1600 - total flux cleaned = 0.0080359 Jy ! Component: 1650 - total flux cleaned = 0.00819532 Jy ! Component: 1700 - total flux cleaned = 0.00828907 Jy ! Component: 1750 - total flux cleaned = 0.00825815 Jy ! Component: 1800 - total flux cleaned = 0.0083199 Jy ! Component: 1850 - total flux cleaned = 0.00831994 Jy ! Component: 1900 - total flux cleaned = 0.00829031 Jy ! Component: 1950 - total flux cleaned = 0.00840949 Jy ! Component: 2000 - total flux cleaned = 0.00835022 Jy ! Total flux subtracted in 2048 components = 0.00835034 Jy ! Clean residual min=-0.001722 max=0.001530 Jy/beam ! Clean residual mean=0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.222922 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 233 components and 0.222922 Jy ![Exited script file: muppet] wmap "J0321-0526_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.922 x 2.146 at 0.7795 degrees (North through East) ! Clean map min=-0.0027293 max=0.18085 Jy/beam ! Writing clean map to FITS file: J0321-0526_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.180849 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00055973 device "J0321-0526_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0321-0526_X_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.928502 0.928502 1.857 3.71401 7.42801 14.856 29.7121 59.4241 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.18 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.922 x 2.146 at 0.7795 degrees (North through East) ! Clean map min=-0.0027293 max=0.18085 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0321-0526_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0321-0526_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0321-0526_X_2004_05_27_yyk_uvs.log closed on Tue Dec 6 23:57:18 2005