! Started logfile: J0310-0823_S_2004_05_27_yyk_uvs.log on Tue Dec  6 23:57:01 2005
obs J0310-0823_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J0310-0823_S_2004_05_27_yyk_uve.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.751389 visibilities/baseline/integration-bin.
! Found source: J0310-0823
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1392 lines of history.
! 
! Reading 2164 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0310-0823_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.12493 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.897111Jy  sigma=16.617485
! Fit after  self-cal, rms=0.895875Jy  sigma=16.608353
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.278 mas, bmaj=9.062 mas, bpa=16.47 degrees
! Estimated noise=1.48972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0895644 Jy
! Component: 100  -  total flux cleaned = 0.107938 Jy
! Total flux subtracted in 100 components = 0.107938 Jy
! Clean residual min=-0.004649 max=0.006679 Jy/beam
! Clean residual mean=0.000041 rms=0.001471 Jy/beam
! Combined flux in latest and established models = 0.107938 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.107938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064027Jy  sigma=1.054491
! Fit after  self-cal, rms=0.064005Jy  sigma=1.054158
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.192 mas, bmaj=11.37 mas, bpa=16.32 degrees
! Estimated noise=0.875588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00940253 Jy
! Component: 100  -  total flux cleaned = 0.0134173 Jy
! Component: 150  -  total flux cleaned = 0.0155321 Jy
! Component: 200  -  total flux cleaned = 0.0164557 Jy
! Total flux subtracted in 200 components = 0.0164557 Jy
! Clean residual min=-0.004106 max=0.004794 Jy/beam
! Clean residual mean=0.000053 rms=0.001059 Jy/beam
! Combined flux in latest and established models = 0.124394 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 38 components and 0.124394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063161Jy  sigma=1.034574
! Fit after  self-cal, rms=0.063152Jy  sigma=1.034248
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00723
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        0.98     KP        1.00     
!   LA        1.04     MK        1.00*    NL        0.99     OV        0.97     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.991385
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.91     HN        0.94     KP        0.98     
!   LA        0.93     MK        1.00*    NL        1.02     OV        1.07     
!   PT        1.13     SC        0.98     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.02495
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.09     KP        0.86     
!   LA        1.00*    MK        1.00*    NL        0.95     OV        0.87     
!   PT        0.98     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.063152Jy  sigma=1.034248
! Fit after  self-cal, rms=0.062233Jy  sigma=1.020202
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062233Jy  sigma=1.020202
! Fit after  self-cal, rms=0.062224Jy  sigma=1.020023
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.175 mas, bmaj=11.32 mas, bpa=16.06 degrees
! Estimated noise=0.873674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000944634 Jy
! Component: 100  -  total flux cleaned = 0.00107599 Jy
! Component: 150  -  total flux cleaned = 0.00115691 Jy
! Component: 200  -  total flux cleaned = 0.00120416 Jy
! Total flux subtracted in 200 components = 0.00120416 Jy
! Clean residual min=-0.003627 max=0.004591 Jy/beam
! Clean residual mean=0.000065 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.125598 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 51 components and 0.125598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062185Jy  sigma=1.019427
! Fit after  self-cal, rms=0.062176Jy  sigma=1.019264
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062176Jy  sigma=1.019264
! Fit after  self-cal, rms=0.058336Jy  sigma=0.967670
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, 22).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361029 Jy
! Component: 100  -  total flux cleaned = 0.00455939 Jy
! Component: 150  -  total flux cleaned = 0.00477809 Jy
! Component: 200  -  total flux cleaned = 0.00490783 Jy
! Total flux subtracted in 200 components = 0.00490783 Jy
! Clean residual min=-0.003001 max=0.003442 Jy/beam
! Clean residual mean=0.000042 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.130506 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 80 components and 0.130506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057972Jy  sigma=0.960771
! Fit after  self-cal, rms=0.057649Jy  sigma=0.956186
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.175 x 11.32 at 16.06 degrees (North through East)
! Clean map  min=-0.0029249  max=0.10742 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057649Jy  sigma=0.956186
! Fit after  self-cal, rms=0.056201Jy  sigma=0.948017
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056201Jy  sigma=0.948017
! Fit after  self-cal, rms=0.056153Jy  sigma=0.947408
! Inverting map and beam 
! Estimated beam: bmin=4.111 mas, bmaj=11.2 mas, bpa=16.28 degrees
! Estimated noise=0.858405 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000492819 Jy
! Component: 100  -  total flux cleaned = 0.000438196 Jy
! Component: 150  -  total flux cleaned = 0.000439946 Jy
! Component: 200  -  total flux cleaned = 0.000356049 Jy
! Total flux subtracted in 200 components = 0.000356049 Jy
! Clean residual min=-0.003294 max=0.003018 Jy/beam
! Clean residual mean=0.000030 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.130862 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 100 components and 0.130862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056071Jy  sigma=0.945903
! Fit after  self-cal, rms=0.056049Jy  sigma=0.945652
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056049Jy  sigma=0.945652
! Fit after  self-cal, rms=0.055993Jy  sigma=0.942461
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055993Jy  sigma=0.942461
! Fit after  self-cal, rms=0.055980Jy  sigma=0.942259
! Inverting map and beam 
! Estimated beam: bmin=4.089 mas, bmaj=11.16 mas, bpa=16.36 degrees
! Estimated noise=0.850872 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.21628e-05 Jy
! Component: 100  -  total flux cleaned = 0.000189028 Jy
! Component: 150  -  total flux cleaned = 0.000278122 Jy
! Component: 200  -  total flux cleaned = 0.000356478 Jy
! Total flux subtracted in 200 components = 0.000356478 Jy
! Clean residual min=-0.003031 max=0.002882 Jy/beam
! Clean residual mean=0.000032 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.131218 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 124 components and 0.131218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055899Jy  sigma=0.940662
! Fit after  self-cal, rms=0.055892Jy  sigma=0.940552
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.278 mas, bmaj=14.04 mas, bpa=5.541 degrees
! Estimated noise=0.996414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -2.30714e-05 Jy
! Component: 100  -  total flux cleaned = 5.26392e-06 Jy
! Component: 150  -  total flux cleaned = 2.91456e-05 Jy
! Component: 200  -  total flux cleaned = 9.36471e-05 Jy
! Total flux subtracted in 200 components = 9.36471e-05 Jy
! Clean residual min=-0.002927 max=0.003038 Jy/beam
! Clean residual mean=0.000048 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.131312 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 152 components and 0.131312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055889Jy  sigma=0.940255
! Fit after  self-cal, rms=0.055889Jy  sigma=0.940219
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.258 mas, bmaj=9.057 mas, bpa=16.49 degrees
! Estimated noise=1.43029 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0879319 Jy
! Component: 100  -  total flux cleaned = 0.106683 Jy
! Component: 150  -  total flux cleaned = 0.115983 Jy
! Component: 200  -  total flux cleaned = 0.120617 Jy
! Total flux subtracted in 200 components = 0.120617 Jy
! Clean residual min=-0.003615 max=0.003967 Jy/beam
! Clean residual mean=0.000024 rms=0.001136 Jy/beam
! Combined flux in latest and established models = 0.120617 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.120617 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.089 mas, bmaj=11.16 mas, bpa=16.36 degrees
! Estimated noise=0.850872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597241 Jy
! Component: 100  -  total flux cleaned = 0.00853137 Jy
! Component: 150  -  total flux cleaned = 0.00907557 Jy
! Component: 200  -  total flux cleaned = 0.0092198 Jy
! Total flux subtracted in 200 components = 0.0092198 Jy
! Clean residual min=-0.003188 max=0.002798 Jy/beam
! Clean residual mean=0.000035 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.129836 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 78 components and 0.129836 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.278 mas, bmaj=14.04 mas, bpa=5.541 degrees
! Estimated noise=0.996414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248813 Jy
! Component: 100  -  total flux cleaned = 0.000374637 Jy
! Component: 150  -  total flux cleaned = 0.000578745 Jy
! Component: 200  -  total flux cleaned = 0.000761275 Jy
! Total flux subtracted in 200 components = 0.000761275 Jy
! Clean residual min=-0.002948 max=0.003063 Jy/beam
! Clean residual mean=0.000051 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.130598 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 106 components and 0.130598 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.089 mas, bmaj=11.16 mas, bpa=16.36 degrees
! Estimated noise=0.850872 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 5.8006e-05 Jy
! Component: 100  -  total flux cleaned = 6.06562e-05 Jy
! Component: 150  -  total flux cleaned = 0.000146547 Jy
! Component: 200  -  total flux cleaned = 0.000225381 Jy
! Total flux subtracted in 200 components = 0.000225381 Jy
! Clean residual min=-0.003038 max=0.002848 Jy/beam
! Clean residual mean=0.000030 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.130823 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 122 components and 0.130823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055877Jy  sigma=0.940312
! Fit after  self-cal, rms=0.055866Jy  sigma=0.940235
wmodel J0310-0823_S_2004_05_27_yyk\_map.mod
! Writing 122 model components to file: J0310-0823_S_2004_05_27_yyk_map.mod
wobs J0310-0823_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J0310-0823_S_2004_05_27_yyk_uvs.fits
wwins J0310-0823_S_2004_05_27_yyk\_map.win
! wwins: Wrote 2 windows to J0310-0823_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136877 Jy
! Component: 100  -  total flux cleaned = 0.000148747 Jy
! Component: 150  -  total flux cleaned = 0.000367899 Jy
! Component: 200  -  total flux cleaned = 0.000326118 Jy
! Component: 250  -  total flux cleaned = 0.000365641 Jy
! Component: 300  -  total flux cleaned = 0.000516368 Jy
! Component: 350  -  total flux cleaned = 0.000479162 Jy
! Component: 400  -  total flux cleaned = 0.000478386 Jy
! Component: 450  -  total flux cleaned = 0.000444182 Jy
! Component: 500  -  total flux cleaned = 0.000344453 Jy
! Component: 550  -  total flux cleaned = 0.000345441 Jy
! Component: 600  -  total flux cleaned = 0.000345643 Jy
! Component: 650  -  total flux cleaned = 0.000314418 Jy
! Component: 700  -  total flux cleaned = 0.000223203 Jy
! Component: 750  -  total flux cleaned = 0.000193284 Jy
! Component: 800  -  total flux cleaned = 0.000105206 Jy
! Component: 850  -  total flux cleaned = 4.756e-05 Jy
! Component: 900  -  total flux cleaned = -0.00017613 Jy
! Component: 950  -  total flux cleaned = -0.000284824 Jy
! Component: 1000  -  total flux cleaned = -0.000365702 Jy
! Component: 1050  -  total flux cleaned = -0.000550237 Jy
! Component: 1100  -  total flux cleaned = -0.000808646 Jy
! Component: 1150  -  total flux cleaned = -0.000961429 Jy
! Component: 1200  -  total flux cleaned = -0.00121199 Jy
! Component: 1250  -  total flux cleaned = -0.00140866 Jy
! Component: 1300  -  total flux cleaned = -0.0014808 Jy
! Component: 1350  -  total flux cleaned = -0.00169613 Jy
! Component: 1400  -  total flux cleaned = -0.00183665 Jy
! Component: 1450  -  total flux cleaned = -0.00202141 Jy
! Component: 1500  -  total flux cleaned = -0.00213524 Jy
! Component: 1550  -  total flux cleaned = -0.00224772 Jy
! Component: 1600  -  total flux cleaned = -0.00235829 Jy
! Component: 1650  -  total flux cleaned = -0.0024675 Jy
! Component: 1700  -  total flux cleaned = -0.00263964 Jy
! Component: 1750  -  total flux cleaned = -0.00270296 Jy
! Component: 1800  -  total flux cleaned = -0.00278668 Jy
! Component: 1850  -  total flux cleaned = -0.00289018 Jy
! Component: 1900  -  total flux cleaned = -0.00301259 Jy
! Component: 1950  -  total flux cleaned = -0.00317273 Jy
! Component: 2000  -  total flux cleaned = -0.00321248 Jy
! Total flux subtracted in 2048 components = -0.00338888 Jy
! Clean residual min=-0.001107 max=0.001181 Jy/beam
! Clean residual mean=0.000016 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.127434 Jy
keep
! Adding 137 model components to the UV plane model.
! The established model now contains 259 components and 0.127434 Jy
![Exited script file: muppet]
wmap "J0310-0823_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.089 x 11.16 at 16.36 degrees (North through East)
! Clean map  min=-0.0023559  max=0.1047 Jy/beam
! Writing clean map to FITS file: J0310-0823_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.104695 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000409321 
device "J0310-0823_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J0310-0823_S_2004_05_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.17289 1.17289 2.34578 4.69157 9.38313 18.7663 37.5325 75.065
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.104 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.089 x 11.16 at 16.36 degrees (North through East)
! Clean map  min=-0.0023559  max=0.1047 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0310-0823_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J0310-0823_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0310-0823_S_2004_05_27_yyk_uvs.log closed on Tue Dec  6 23:57:05 2005