! Started logfile: J0301-3126_X_2004_04_30_yyk_uvs.log on Tue Dec 6 23:56:22 2005 obs J0301-3126_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0301-3126_X_2004_04_30_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893333 visibilities/baseline/integration-bin. ! Found source: J0301-3126 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1545 lines of history. ! ! Reading 804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0301-3126_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.226247 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.790276Jy sigma=13.070661 ! Fit after self-cal, rms=0.790164Jy sigma=13.068225 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.659 mas, bmaj=1.828 mas, bpa=-3.422 degrees ! Estimated noise=2.30354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.179075 Jy ! Component: 100 - total flux cleaned = 0.210061 Jy ! Total flux subtracted in 100 components = 0.210061 Jy ! Clean residual min=-0.010720 max=0.012949 Jy/beam ! Clean residual mean=-0.000053 rms=0.002851 Jy/beam ! Combined flux in latest and established models = 0.210061 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.210061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073593Jy sigma=1.083877 ! Fit after self-cal, rms=0.073545Jy sigma=1.083165 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8126 mas, bmaj=2.196 mas, bpa=-2.713 degrees ! Estimated noise=1.74346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.019454 Jy ! Component: 100 - total flux cleaned = 0.0270578 Jy ! Component: 150 - total flux cleaned = 0.030327 Jy ! Component: 200 - total flux cleaned = 0.0307189 Jy ! Total flux subtracted in 200 components = 0.0307189 Jy ! Clean residual min=-0.008008 max=0.008201 Jy/beam ! Clean residual mean=0.000012 rms=0.002158 Jy/beam ! Combined flux in latest and established models = 0.24078 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.24078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071291Jy sigma=1.019149 ! Fit after self-cal, rms=0.071299Jy sigma=1.019044 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01129 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.14 KP 0.89 ! LA 0.99 MK 0.96 NL 1.05 OV 0.93 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.985327 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.95 KP 0.87 ! LA 1.03 MK 1.03 NL 1.09 OV 1.01 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.963677 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.07 KP 0.89 ! LA 1.02 MK 1.04 NL 1.09 OV 0.99 ! PT 1.10 SC 1.13 ! ! ! Fit before self-cal, rms=0.071299Jy sigma=1.019044 ! Fit after self-cal, rms=0.069462Jy sigma=0.980810 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069462Jy sigma=0.980810 ! Fit after self-cal, rms=0.069482Jy sigma=0.980753 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8165 mas, bmaj=2.211 mas, bpa=-2.645 degrees ! Estimated noise=1.71868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0029514 Jy ! Component: 100 - total flux cleaned = -0.0030025 Jy ! Component: 150 - total flux cleaned = -0.00300823 Jy ! Component: 200 - total flux cleaned = -0.00291123 Jy ! Total flux subtracted in 200 components = -0.00291122 Jy ! Clean residual min=-0.005697 max=0.007172 Jy/beam ! Clean residual mean=-0.000012 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.237868 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.237868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069285Jy sigma=0.978539 ! Fit after self-cal, rms=0.069288Jy sigma=0.978475 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069288Jy sigma=0.978475 ! Fit after self-cal, rms=0.066026Jy sigma=0.940666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809073 Jy ! Component: 100 - total flux cleaned = 0.000806939 Jy ! Component: 150 - total flux cleaned = 0.000828792 Jy ! Component: 200 - total flux cleaned = 0.000850968 Jy ! Total flux subtracted in 200 components = 0.000850968 Jy ! Clean residual min=-0.005787 max=0.006894 Jy/beam ! Clean residual mean=-0.000011 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.238719 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.238719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066009Jy sigma=0.940227 ! Fit after self-cal, rms=0.065352Jy sigma=0.934617 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8165 x 2.211 at -2.645 degrees (North through East) ! Clean map min=-0.0052381 max=0.20434 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065352Jy sigma=0.934617 ! Fit after self-cal, rms=0.065639Jy sigma=0.916680 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065639Jy sigma=0.916680 ! Fit after self-cal, rms=0.065565Jy sigma=0.915414 ! Inverting map and beam ! Estimated beam: bmin=0.8169 mas, bmaj=2.207 mas, bpa=-2.74 degrees ! Estimated noise=1.71723 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.54348e-05 Jy ! Component: 100 - total flux cleaned = -6.40047e-05 Jy ! Component: 150 - total flux cleaned = -0.000116793 Jy ! Component: 200 - total flux cleaned = -0.000140479 Jy ! Total flux subtracted in 200 components = -0.000140479 Jy ! Clean residual min=-0.005418 max=0.005880 Jy/beam ! Clean residual mean=-0.000011 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.238579 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.238579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065558Jy sigma=0.915082 ! Fit after self-cal, rms=0.065569Jy sigma=0.914732 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065569Jy sigma=0.914732 ! Fit after self-cal, rms=0.065653Jy sigma=0.902385 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065653Jy sigma=0.902385 ! Fit after self-cal, rms=0.065678Jy sigma=0.902285 ! Inverting map and beam ! Estimated beam: bmin=0.8222 mas, bmaj=2.22 mas, bpa=-2.438 degrees ! Estimated noise=1.72151 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.57322e-05 Jy ! Component: 100 - total flux cleaned = -0.000133989 Jy ! Component: 150 - total flux cleaned = -0.000107126 Jy ! Component: 200 - total flux cleaned = -8.09218e-05 Jy ! Total flux subtracted in 200 components = -8.09218e-05 Jy ! Clean residual min=-0.005310 max=0.005878 Jy/beam ! Clean residual mean=-0.000014 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.238498 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.238498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065630Jy sigma=0.901774 ! Fit after self-cal, rms=0.065639Jy sigma=0.901714 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.419 mas, bmaj=7.088 mas, bpa=1.228 degrees ! Estimated noise=2.25341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.87631e-05 Jy ! Component: 100 - total flux cleaned = 6.01555e-05 Jy ! Component: 150 - total flux cleaned = 9.14043e-05 Jy ! Component: 200 - total flux cleaned = 0.000144865 Jy ! Total flux subtracted in 200 components = 0.000144865 Jy ! Clean residual min=-0.005381 max=0.005901 Jy/beam ! Clean residual mean=-0.000019 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 0.238643 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 56 components and 0.238643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065615Jy sigma=0.901860 ! Fit after self-cal, rms=0.065634Jy sigma=0.901714 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6612 mas, bmaj=1.83 mas, bpa=-3.33 degrees ! Estimated noise=2.32116 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.181096 Jy ! Component: 100 - total flux cleaned = 0.212044 Jy ! Component: 150 - total flux cleaned = 0.223417 Jy ! Component: 200 - total flux cleaned = 0.228969 Jy ! Total flux subtracted in 200 components = 0.228969 Jy ! Clean residual min=-0.008803 max=0.007231 Jy/beam ! Clean residual mean=-0.000028 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 0.228968 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.228968 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8222 mas, bmaj=2.22 mas, bpa=-2.438 degrees ! Estimated noise=1.72151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627126 Jy ! Component: 100 - total flux cleaned = 0.00783957 Jy ! Component: 150 - total flux cleaned = 0.00803029 Jy ! Component: 200 - total flux cleaned = 0.00823003 Jy ! Total flux subtracted in 200 components = 0.00823003 Jy ! Clean residual min=-0.005168 max=0.006008 Jy/beam ! Clean residual mean=-0.000017 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.237198 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.237199 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.419 mas, bmaj=7.088 mas, bpa=1.228 degrees ! Estimated noise=2.25341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945492 Jy ! Component: 100 - total flux cleaned = 0.000941927 Jy ! Component: 150 - total flux cleaned = 0.000974174 Jy ! Component: 200 - total flux cleaned = 0.0010081 Jy ! Total flux subtracted in 200 components = 0.0010081 Jy ! Clean residual min=-0.005452 max=0.006016 Jy/beam ! Clean residual mean=-0.000021 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.238207 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.238207 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8222 mas, bmaj=2.22 mas, bpa=-2.438 degrees ! Estimated noise=1.72151 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713819 Jy ! Component: 100 - total flux cleaned = -0.000637267 Jy ! Component: 150 - total flux cleaned = -0.000538818 Jy ! Component: 200 - total flux cleaned = -0.000451383 Jy ! Total flux subtracted in 200 components = -0.000451383 Jy ! Clean residual min=-0.005198 max=0.005836 Jy/beam ! Clean residual mean=-0.000016 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.237755 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.237755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065712Jy sigma=0.902200 ! Fit after self-cal, rms=0.065728Jy sigma=0.902128 wmodel J0301-3126_X_2004_04_30_yyk\_map.mod ! Writing 43 model components to file: J0301-3126_X_2004_04_30_yyk_map.mod wobs J0301-3126_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0301-3126_X_2004_04_30_yyk_uvs.fits wwins J0301-3126_X_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0301-3126_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186169 Jy ! Component: 100 - total flux cleaned = 0.0028728 Jy ! Component: 150 - total flux cleaned = 0.00313283 Jy ! Component: 200 - total flux cleaned = 0.0032173 Jy ! Component: 250 - total flux cleaned = 0.00321925 Jy ! Component: 300 - total flux cleaned = 0.00291822 Jy ! Component: 350 - total flux cleaned = 0.00270112 Jy ! Component: 400 - total flux cleaned = 0.00214202 Jy ! Component: 450 - total flux cleaned = 0.00139859 Jy ! Component: 500 - total flux cleaned = 0.000807926 Jy ! Component: 550 - total flux cleaned = 0.000297271 Jy ! Component: 600 - total flux cleaned = -0.000200996 Jy ! Component: 650 - total flux cleaned = -0.000684906 Jy ! Component: 700 - total flux cleaned = -0.00115649 Jy ! Component: 750 - total flux cleaned = -0.00155865 Jy ! Component: 800 - total flux cleaned = -0.00183885 Jy ! Component: 850 - total flux cleaned = -0.00238437 Jy ! Component: 900 - total flux cleaned = -0.00259729 Jy ! Component: 950 - total flux cleaned = -0.0030152 Jy ! Component: 1000 - total flux cleaned = -0.00337301 Jy ! Component: 1050 - total flux cleaned = -0.00386991 Jy ! Component: 1100 - total flux cleaned = -0.00416153 Jy ! Component: 1150 - total flux cleaned = -0.00454171 Jy ! Component: 1200 - total flux cleaned = -0.00496105 Jy ! Component: 1250 - total flux cleaned = -0.00523579 Jy ! Component: 1300 - total flux cleaned = -0.00568494 Jy ! Component: 1350 - total flux cleaned = -0.00616849 Jy ! Component: 1400 - total flux cleaned = -0.00642706 Jy ! Component: 1450 - total flux cleaned = -0.00672424 Jy ! Component: 1500 - total flux cleaned = -0.00705829 Jy ! Component: 1550 - total flux cleaned = -0.0073453 Jy ! Component: 1600 - total flux cleaned = -0.0075882 Jy ! Component: 1650 - total flux cleaned = -0.00786696 Jy ! Component: 1700 - total flux cleaned = -0.00806285 Jy ! Component: 1750 - total flux cleaned = -0.00821762 Jy ! Component: 1800 - total flux cleaned = -0.00825585 Jy ! Component: 1850 - total flux cleaned = -0.00851919 Jy ! Component: 1900 - total flux cleaned = -0.00855527 Jy ! Component: 1950 - total flux cleaned = -0.00866437 Jy ! Component: 2000 - total flux cleaned = -0.00870016 Jy ! Total flux subtracted in 2048 components = -0.00884262 Jy ! Clean residual min=-0.002335 max=0.002199 Jy/beam ! Clean residual mean=-0.000003 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.228913 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 162 components and 0.228913 Jy ![Exited script file: muppet] wmap "J0301-3126_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8222 x 2.22 at -2.438 degrees (North through East) ! Clean map min=-0.0035588 max=0.20655 Jy/beam ! Writing clean map to FITS file: J0301-3126_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.206546 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00065132 device "J0301-3126_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0301-3126_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.946018 0.946018 1.89204 3.78407 7.56815 15.1363 30.2726 60.5452 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.206 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8222 x 2.22 at -2.438 degrees (North through East) ! Clean map min=-0.0035588 max=0.20655 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0301-3126_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0301-3126_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0301-3126_X_2004_04_30_yyk_uvs.log closed on Tue Dec 6 23:56:26 2005