! Started logfile: J0239-0234_S_2004_05_08_yyk_uvs.log on Tue Dec 6 23:55:23 2005 obs J0239-0234_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0239-0234_S_2004_05_08_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.75873 visibilities/baseline/integration-bin. ! Found source: J0239-0234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 1912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0239-0234_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.334034 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.682362Jy sigma=12.079149 ! Fit after self-cal, rms=0.682227Jy sigma=12.079901 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.539 mas, bmaj=6.367 mas, bpa=-4.62 degrees ! Estimated noise=1.37989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.271741 Jy ! Component: 100 - total flux cleaned = 0.313763 Jy ! Total flux subtracted in 100 components = 0.313763 Jy ! Clean residual min=-0.007272 max=0.010877 Jy/beam ! Clean residual mean=0.000025 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 0.313763 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.313763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084327Jy sigma=1.229559 ! Fit after self-cal, rms=0.084322Jy sigma=1.229287 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=7.651 mas, bpa=-3.334 degrees ! Estimated noise=0.934319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184125 Jy ! Component: 100 - total flux cleaned = 0.0251403 Jy ! Component: 150 - total flux cleaned = 0.0284721 Jy ! Component: 200 - total flux cleaned = 0.0296219 Jy ! Total flux subtracted in 200 components = 0.0296219 Jy ! Clean residual min=-0.004792 max=0.006482 Jy/beam ! Clean residual mean=-0.000017 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.343385 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.343385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080961Jy sigma=1.173586 ! Fit after self-cal, rms=0.080938Jy sigma=1.173230 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999756 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.96 KP 0.98 ! LA 1.12 MK 0.96 NL 1.02 OV 1.00 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.981131 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.04 KP 1.03 ! LA 1.07 MK 1.04 NL 1.02 OV 1.02 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992412 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.92 HN 0.98 KP 0.98 ! LA 0.96 MK 1.03 NL 1.07 OV 1.04 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.080938Jy sigma=1.173230 ! Fit after self-cal, rms=0.078812Jy sigma=1.128286 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078812Jy sigma=1.128286 ! Fit after self-cal, rms=0.078811Jy sigma=1.128221 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=7.563 mas, bpa=-2.697 degrees ! Estimated noise=0.938047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586094 Jy ! Component: 100 - total flux cleaned = 0.00843229 Jy ! Component: 150 - total flux cleaned = 0.00908432 Jy ! Component: 200 - total flux cleaned = 0.00950621 Jy ! Total flux subtracted in 200 components = 0.00950621 Jy ! Clean residual min=-0.004230 max=0.005507 Jy/beam ! Clean residual mean=-0.000003 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.352891 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.352891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078347Jy sigma=1.121685 ! Fit after self-cal, rms=0.078331Jy sigma=1.121489 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078331Jy sigma=1.121489 ! Fit after self-cal, rms=0.075861Jy sigma=1.083421 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595447 Jy ! Component: 100 - total flux cleaned = 0.00789119 Jy ! Component: 150 - total flux cleaned = 0.00830149 Jy ! Component: 200 - total flux cleaned = 0.00864123 Jy ! Total flux subtracted in 200 components = 0.00864123 Jy ! Clean residual min=-0.004248 max=0.004031 Jy/beam ! Clean residual mean=-0.000008 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.361532 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 0.361533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075390Jy sigma=1.075739 ! Fit after self-cal, rms=0.075157Jy sigma=1.071699 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.136 x 7.563 at -2.697 degrees (North through East) ! Clean map min=-0.0040366 max=0.31774 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075157Jy sigma=1.071699 ! Fit after self-cal, rms=0.075297Jy sigma=1.042764 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075297Jy sigma=1.042764 ! Fit after self-cal, rms=0.075288Jy sigma=1.042070 ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=7.462 mas, bpa=-2.254 degrees ! Estimated noise=0.955626 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762941 Jy ! Component: 100 - total flux cleaned = 0.0105155 Jy ! Component: 150 - total flux cleaned = 0.0119125 Jy ! Component: 200 - total flux cleaned = 0.0130381 Jy ! Total flux subtracted in 200 components = 0.0130381 Jy ! Clean residual min=-0.003778 max=0.004045 Jy/beam ! Clean residual mean=-0.000013 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.374571 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 102 components and 0.374571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074456Jy sigma=1.030338 ! Fit after self-cal, rms=0.074468Jy sigma=1.030078 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074468Jy sigma=1.030078 ! Fit after self-cal, rms=0.073529Jy sigma=1.005282 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073529Jy sigma=1.005282 ! Fit after self-cal, rms=0.073531Jy sigma=1.005156 ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.408 mas, bpa=-1.862 degrees ! Estimated noise=0.966051 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554641 Jy ! Component: 100 - total flux cleaned = 0.00794908 Jy ! Component: 150 - total flux cleaned = 0.00952839 Jy ! Component: 200 - total flux cleaned = 0.0103922 Jy ! Total flux subtracted in 200 components = 0.0103922 Jy ! Clean residual min=-0.003921 max=0.004259 Jy/beam ! Clean residual mean=-0.000018 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.384963 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 130 components and 0.384963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073126Jy sigma=0.998897 ! Fit after self-cal, rms=0.073129Jy sigma=0.998816 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.259 mas, bmaj=11.69 mas, bpa=-3.046 degrees ! Estimated noise=1.26747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336444 Jy ! Component: 100 - total flux cleaned = 0.000386153 Jy ! Component: 150 - total flux cleaned = 0.000513564 Jy ! Component: 200 - total flux cleaned = 0.000584586 Jy ! Total flux subtracted in 200 components = 0.000584586 Jy ! Clean residual min=-0.005105 max=0.005150 Jy/beam ! Clean residual mean=-0.000046 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.385547 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 151 components and 0.385547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073104Jy sigma=0.998714 ! Fit after self-cal, rms=0.073098Jy sigma=0.998598 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.513 mas, bmaj=6.283 mas, bpa=-3.794 degrees ! Estimated noise=1.41369 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.278924 Jy ! Component: 100 - total flux cleaned = 0.327447 Jy ! Component: 150 - total flux cleaned = 0.345224 Jy ! Component: 200 - total flux cleaned = 0.355787 Jy ! Total flux subtracted in 200 components = 0.355787 Jy ! Clean residual min=-0.005236 max=0.005419 Jy/beam ! Clean residual mean=0.000014 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.355787 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.355787 Jy ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.408 mas, bpa=-1.862 degrees ! Estimated noise=0.966051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105139 Jy ! Component: 100 - total flux cleaned = 0.0167407 Jy ! Component: 150 - total flux cleaned = 0.021192 Jy ! Component: 200 - total flux cleaned = 0.0244714 Jy ! Total flux subtracted in 200 components = 0.0244714 Jy ! Clean residual min=-0.003808 max=0.004257 Jy/beam ! Clean residual mean=-0.000011 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.380258 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 78 components and 0.380258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.259 mas, bmaj=11.69 mas, bpa=-3.046 degrees ! Estimated noise=1.26747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308302 Jy ! Component: 100 - total flux cleaned = 0.00408538 Jy ! Component: 150 - total flux cleaned = 0.00435752 Jy ! Component: 200 - total flux cleaned = 0.00452003 Jy ! Total flux subtracted in 200 components = 0.00452003 Jy ! Clean residual min=-0.005140 max=0.005235 Jy/beam ! Clean residual mean=-0.000041 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.384778 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 120 components and 0.384778 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.408 mas, bpa=-1.862 degrees ! Estimated noise=0.966051 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750984 Jy ! Component: 100 - total flux cleaned = 0.00102293 Jy ! Component: 150 - total flux cleaned = 0.0012447 Jy ! Component: 200 - total flux cleaned = 0.00136292 Jy ! Total flux subtracted in 200 components = 0.00136292 Jy ! Clean residual min=-0.003995 max=0.004145 Jy/beam ! Clean residual mean=-0.000019 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.386141 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.386141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073119Jy sigma=0.998829 ! Fit after self-cal, rms=0.073117Jy sigma=0.998736 wmodel J0239-0234_S_2004_05_08_yyk\_map.mod ! Writing 139 model components to file: J0239-0234_S_2004_05_08_yyk_map.mod wobs J0239-0234_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0239-0234_S_2004_05_08_yyk_uvs.fits wwins J0239-0234_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J0239-0234_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228281 Jy ! Component: 100 - total flux cleaned = 4.16716e-05 Jy ! Component: 150 - total flux cleaned = 0.000410959 Jy ! Component: 200 - total flux cleaned = 0.000927332 Jy ! Component: 250 - total flux cleaned = 0.00130976 Jy ! Component: 300 - total flux cleaned = 0.00141496 Jy ! Component: 350 - total flux cleaned = 0.00121616 Jy ! Component: 400 - total flux cleaned = 0.00102382 Jy ! Component: 450 - total flux cleaned = 0.00088257 Jy ! Component: 500 - total flux cleaned = 0.000699446 Jy ! Component: 550 - total flux cleaned = 0.0005202 Jy ! Component: 600 - total flux cleaned = 0.000300978 Jy ! Component: 650 - total flux cleaned = 8.68363e-05 Jy ! Component: 700 - total flux cleaned = -0.000209385 Jy ! Component: 750 - total flux cleaned = -0.000705597 Jy ! Component: 800 - total flux cleaned = -0.000908294 Jy ! Component: 850 - total flux cleaned = -0.000988855 Jy ! Component: 900 - total flux cleaned = -0.0014223 Jy ! Component: 950 - total flux cleaned = -0.00157709 Jy ! Component: 1000 - total flux cleaned = -0.00176806 Jy ! Component: 1050 - total flux cleaned = -0.00203052 Jy ! Component: 1100 - total flux cleaned = -0.00214111 Jy ! Component: 1150 - total flux cleaned = -0.00232385 Jy ! Component: 1200 - total flux cleaned = -0.00254037 Jy ! Component: 1250 - total flux cleaned = -0.00264699 Jy ! Component: 1300 - total flux cleaned = -0.00285836 Jy ! Component: 1350 - total flux cleaned = -0.00299613 Jy ! Component: 1400 - total flux cleaned = -0.00309857 Jy ! Component: 1450 - total flux cleaned = -0.0032674 Jy ! Component: 1500 - total flux cleaned = -0.00330037 Jy ! Component: 1550 - total flux cleaned = -0.00349723 Jy ! Component: 1600 - total flux cleaned = -0.00362623 Jy ! Component: 1650 - total flux cleaned = -0.00372224 Jy ! Component: 1700 - total flux cleaned = -0.00384868 Jy ! Component: 1750 - total flux cleaned = -0.00397384 Jy ! Component: 1800 - total flux cleaned = -0.00403549 Jy ! Component: 1850 - total flux cleaned = -0.00412733 Jy ! Component: 1900 - total flux cleaned = -0.00436832 Jy ! Component: 1950 - total flux cleaned = -0.00436809 Jy ! Component: 2000 - total flux cleaned = -0.00451548 Jy ! Total flux subtracted in 2048 components = -0.00460283 Jy ! Clean residual min=-0.001854 max=0.001864 Jy/beam ! Clean residual mean=-0.000012 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.381539 Jy keep ! Adding 154 model components to the UV plane model. ! The established model now contains 293 components and 0.381539 Jy ![Exited script file: muppet] wmap "J0239-0234_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 7.408 at -1.862 degrees (North through East) ! Clean map min=-0.003549 max=0.32545 Jy/beam ! Writing clean map to FITS file: J0239-0234_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.325448 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00062088 device "J0239-0234_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0239-0234_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.572332 0.572332 1.14466 2.28933 4.57865 9.15731 18.3146 36.6292 73.2585 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.325 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 7.408 at -1.862 degrees (North through East) ! Clean map min=-0.003549 max=0.32545 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0239-0234_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0239-0234_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0239-0234_S_2004_05_08_yyk_uvs.log closed on Tue Dec 6 23:55:28 2005