! Started logfile: J0223-1656_S_2004_05_08_yyk_uvs.log on Tue Dec 6 23:54:26 2005 obs J0223-1656_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0223-1656_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0223-1656 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0223-1656_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.175687 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.852506Jy sigma=13.089381 ! Fit after self-cal, rms=0.852166Jy sigma=13.082191 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.815 mas, bpa=5.282 degrees ! Estimated noise=2.44301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.126743 Jy ! Component: 100 - total flux cleaned = 0.15241 Jy ! Total flux subtracted in 100 components = 0.15241 Jy ! Clean residual min=-0.010527 max=0.012772 Jy/beam ! Clean residual mean=0.000135 rms=0.003298 Jy/beam ! Combined flux in latest and established models = 0.15241 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.15241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085765Jy sigma=1.117640 ! Fit after self-cal, rms=0.085673Jy sigma=1.117151 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=7.842 mas, bpa=4.254 degrees ! Estimated noise=1.82242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148124 Jy ! Component: 100 - total flux cleaned = 0.0213008 Jy ! Component: 150 - total flux cleaned = 0.0235568 Jy ! Component: 200 - total flux cleaned = 0.0239916 Jy ! Total flux subtracted in 200 components = 0.0239916 Jy ! Clean residual min=-0.008362 max=0.013528 Jy/beam ! Clean residual mean=0.000081 rms=0.003009 Jy/beam ! Combined flux in latest and established models = 0.176402 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.176402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084131Jy sigma=1.085799 ! Fit after self-cal, rms=0.084073Jy sigma=1.085119 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00881 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.10 HN 0.86 KP 0.94 ! LA 0.99 MK 1.03 NL 1.00 OV 0.97 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.084073Jy sigma=1.085119 ! Fit after self-cal, rms=0.083392Jy sigma=1.078921 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083392Jy sigma=1.078921 ! Fit after self-cal, rms=0.083393Jy sigma=1.078911 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=7.879 mas, bpa=4.452 degrees ! Estimated noise=1.82336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565949 Jy ! Component: 100 - total flux cleaned = 0.000738219 Jy ! Component: 150 - total flux cleaned = 0.000893579 Jy ! Component: 200 - total flux cleaned = 0.00103906 Jy ! Total flux subtracted in 200 components = 0.00103906 Jy ! Clean residual min=-0.008185 max=0.012878 Jy/beam ! Clean residual mean=0.000071 rms=0.002843 Jy/beam ! Combined flux in latest and established models = 0.177441 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.177441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083245Jy sigma=1.076351 ! Fit after self-cal, rms=0.083204Jy sigma=1.075959 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083204Jy sigma=1.075959 ! Fit after self-cal, rms=0.079582Jy sigma=1.041226 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136621 Jy ! Component: 100 - total flux cleaned = 0.0191225 Jy ! Component: 150 - total flux cleaned = 0.0194267 Jy ! Component: 200 - total flux cleaned = 0.0198018 Jy ! Total flux subtracted in 200 components = 0.0198018 Jy ! Clean residual min=-0.006639 max=0.006615 Jy/beam ! Clean residual mean=0.000002 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.197243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 63 components and 0.197243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078401Jy sigma=1.011207 ! Fit after self-cal, rms=0.077946Jy sigma=1.006807 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.233 x 7.879 at 4.452 degrees (North through East) ! Clean map min=-0.0066214 max=0.1433 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077946Jy sigma=1.006807 ! Fit after self-cal, rms=0.077266Jy sigma=1.004915 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077266Jy sigma=1.004915 ! Fit after self-cal, rms=0.077234Jy sigma=1.004758 ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=7.826 mas, bpa=4.083 degrees ! Estimated noise=1.80901 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316839 Jy ! Component: 100 - total flux cleaned = 0.00387523 Jy ! Component: 150 - total flux cleaned = 0.00397017 Jy ! Component: 200 - total flux cleaned = 0.00397194 Jy ! Total flux subtracted in 200 components = 0.00397194 Jy ! Clean residual min=-0.006003 max=0.006626 Jy/beam ! Clean residual mean=-0.000001 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.201215 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.201215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077171Jy sigma=1.000431 ! Fit after self-cal, rms=0.077117Jy sigma=1.000005 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077117Jy sigma=1.000005 ! Fit after self-cal, rms=0.077022Jy sigma=0.995924 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077022Jy sigma=0.995924 ! Fit after self-cal, rms=0.077021Jy sigma=0.995913 ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.825 mas, bpa=3.995 degrees ! Estimated noise=1.80955 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125062 Jy ! Component: 100 - total flux cleaned = 0.00145958 Jy ! Component: 150 - total flux cleaned = 0.00146251 Jy ! Component: 200 - total flux cleaned = 0.00152355 Jy ! Total flux subtracted in 200 components = 0.00152355 Jy ! Clean residual min=-0.005978 max=0.006448 Jy/beam ! Clean residual mean=-0.000006 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.202738 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.202738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077000Jy sigma=0.994215 ! Fit after self-cal, rms=0.076978Jy sigma=0.994083 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.657 mas, bmaj=16.75 mas, bpa=11.65 degrees ! Estimated noise=2.27441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206626 Jy ! Component: 100 - total flux cleaned = 0.00234155 Jy ! Component: 150 - total flux cleaned = 0.00258756 Jy ! Component: 200 - total flux cleaned = 0.00281141 Jy ! Total flux subtracted in 200 components = 0.00281141 Jy ! Clean residual min=-0.007506 max=0.006367 Jy/beam ! Clean residual mean=-0.000024 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 0.20555 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.20555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077007Jy sigma=0.994603 ! Fit after self-cal, rms=0.077012Jy sigma=0.994443 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.564 mas, bmaj=6.816 mas, bpa=5.104 degrees ! Estimated noise=2.41261 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.126517 Jy ! Component: 100 - total flux cleaned = 0.154468 Jy ! Component: 150 - total flux cleaned = 0.170452 Jy ! Component: 200 - total flux cleaned = 0.181156 Jy ! Total flux subtracted in 200 components = 0.181156 Jy ! Clean residual min=-0.008302 max=0.008537 Jy/beam ! Clean residual mean=0.000061 rms=0.002385 Jy/beam ! Combined flux in latest and established models = 0.181156 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.181156 Jy ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.825 mas, bpa=3.995 degrees ! Estimated noise=1.80955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103604 Jy ! Component: 100 - total flux cleaned = 0.0158016 Jy ! Component: 150 - total flux cleaned = 0.0184552 Jy ! Component: 200 - total flux cleaned = 0.0197513 Jy ! Total flux subtracted in 200 components = 0.0197513 Jy ! Clean residual min=-0.006273 max=0.006469 Jy/beam ! Clean residual mean=0.000001 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 0.200907 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.200907 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.657 mas, bmaj=16.75 mas, bpa=11.65 degrees ! Estimated noise=2.27441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263383 Jy ! Component: 100 - total flux cleaned = 0.00301388 Jy ! Component: 150 - total flux cleaned = 0.00334584 Jy ! Component: 200 - total flux cleaned = 0.00364391 Jy ! Total flux subtracted in 200 components = 0.00364391 Jy ! Clean residual min=-0.007973 max=0.006637 Jy/beam ! Clean residual mean=-0.000017 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.204551 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.204551 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.825 mas, bpa=3.995 degrees ! Estimated noise=1.80955 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157871 Jy ! Component: 100 - total flux cleaned = -0.00126641 Jy ! Component: 150 - total flux cleaned = -0.00120584 Jy ! Component: 200 - total flux cleaned = -0.00120712 Jy ! Total flux subtracted in 200 components = -0.00120712 Jy ! Clean residual min=-0.006069 max=0.006343 Jy/beam ! Clean residual mean=-0.000009 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.203344 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.203344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076872Jy sigma=0.993531 ! Fit after self-cal, rms=0.076859Jy sigma=0.993438 wmodel J0223-1656_S_2004_05_08_yyk\_map.mod ! Writing 93 model components to file: J0223-1656_S_2004_05_08_yyk_map.mod wobs J0223-1656_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0223-1656_S_2004_05_08_yyk_uvs.fits wwins J0223-1656_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J0223-1656_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152998 Jy ! Component: 100 - total flux cleaned = 0.00226384 Jy ! Component: 150 - total flux cleaned = 0.00302176 Jy ! Component: 200 - total flux cleaned = 0.00319422 Jy ! Component: 250 - total flux cleaned = 0.00335788 Jy ! Component: 300 - total flux cleaned = 0.00375858 Jy ! Component: 350 - total flux cleaned = 0.00406701 Jy ! Component: 400 - total flux cleaned = 0.0041412 Jy ! Component: 450 - total flux cleaned = 0.00421368 Jy ! Component: 500 - total flux cleaned = 0.00435077 Jy ! Component: 550 - total flux cleaned = 0.00428335 Jy ! Component: 600 - total flux cleaned = 0.00421835 Jy ! Component: 650 - total flux cleaned = 0.00421693 Jy ! Component: 700 - total flux cleaned = 0.00403095 Jy ! Component: 750 - total flux cleaned = 0.00427091 Jy ! Component: 800 - total flux cleaned = 0.00444657 Jy ! Component: 850 - total flux cleaned = 0.00467795 Jy ! Component: 900 - total flux cleaned = 0.00490403 Jy ! Component: 950 - total flux cleaned = 0.00506964 Jy ! Component: 1000 - total flux cleaned = 0.00528375 Jy ! Component: 1050 - total flux cleaned = 0.00544101 Jy ! Component: 1100 - total flux cleaned = 0.00543963 Jy ! Component: 1150 - total flux cleaned = 0.00533879 Jy ! Component: 1200 - total flux cleaned = 0.00543874 Jy ! Component: 1250 - total flux cleaned = 0.00543852 Jy ! Component: 1300 - total flux cleaned = 0.00553382 Jy ! Component: 1350 - total flux cleaned = 0.00543842 Jy ! Component: 1400 - total flux cleaned = 0.0054382 Jy ! Component: 1450 - total flux cleaned = 0.00543821 Jy ! Component: 1500 - total flux cleaned = 0.00543718 Jy ! Component: 1550 - total flux cleaned = 0.00534915 Jy ! Component: 1600 - total flux cleaned = 0.00543653 Jy ! Component: 1650 - total flux cleaned = 0.00530896 Jy ! Component: 1700 - total flux cleaned = 0.00543556 Jy ! Component: 1750 - total flux cleaned = 0.00522831 Jy ! Component: 1800 - total flux cleaned = 0.00514697 Jy ! Component: 1850 - total flux cleaned = 0.00502628 Jy ! Component: 1900 - total flux cleaned = 0.00490731 Jy ! Component: 1950 - total flux cleaned = 0.00478976 Jy ! Component: 2000 - total flux cleaned = 0.00455881 Jy ! Total flux subtracted in 2048 components = 0.00444497 Jy ! Clean residual min=-0.002228 max=0.002353 Jy/beam ! Clean residual mean=-0.000038 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.207789 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 243 components and 0.207789 Jy ![Exited script file: muppet] wmap "J0223-1656_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.825 at 3.995 degrees (North through East) ! Clean map min=-0.0034786 max=0.14638 Jy/beam ! Writing clean map to FITS file: J0223-1656_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146384 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000745951 device "J0223-1656_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0223-1656_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.52876 1.52876 3.05751 6.11502 12.23 24.4601 48.9202 97.8403 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.825 at 3.995 degrees (North through East) ! Clean map min=-0.0034786 max=0.14638 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0223-1656_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0223-1656_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0223-1656_S_2004_05_08_yyk_uvs.log closed on Tue Dec 6 23:54:30 2005