! Started logfile: J0222-3441_X_2004_05_08_yyk_uvs.log on Wed Dec 7 01:08:01 2005 obs J0222-3441_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0222-3441_X_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.638889 visibilities/baseline/integration-bin. ! Found source: J0222-3441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0222-3441_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.784491 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.350616Jy sigma=4.388502 ! Fit after self-cal, rms=0.350599Jy sigma=4.384677 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5928 mas, bmaj=1.9 mas, bpa=-3.481 degrees ! Estimated noise=3.03813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.630373 Jy ! Component: 100 - total flux cleaned = 0.787327 Jy ! Total flux subtracted in 100 components = 0.787327 Jy ! Clean residual min=-0.046183 max=0.074465 Jy/beam ! Clean residual mean=0.000054 rms=0.014525 Jy/beam ! Combined flux in latest and established models = 0.787327 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.787327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190531Jy sigma=2.757213 ! Fit after self-cal, rms=0.190510Jy sigma=2.756766 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6946 mas, bmaj=1.964 mas, bpa=-1.8 degrees ! Estimated noise=2.32862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.120675 Jy ! Component: 100 - total flux cleaned = 0.170321 Jy ! Component: 150 - total flux cleaned = 0.191997 Jy ! Component: 200 - total flux cleaned = 0.196728 Jy ! Total flux subtracted in 200 components = 0.196728 Jy ! Clean residual min=-0.037831 max=0.051576 Jy/beam ! Clean residual mean=0.000136 rms=0.011736 Jy/beam ! Combined flux in latest and established models = 0.984055 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.984055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172097Jy sigma=1.974502 ! Fit after self-cal, rms=0.172006Jy sigma=1.973684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.172006Jy sigma=1.973684 ! Fit after self-cal, rms=0.172006Jy sigma=1.973684 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172006Jy sigma=1.973684 ! Fit after self-cal, rms=0.172006Jy sigma=1.973684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6946 mas, bmaj=1.964 mas, bpa=-1.8 degrees ! Estimated noise=2.32862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213062 Jy ! Component: 100 - total flux cleaned = 0.00350442 Jy ! Component: 150 - total flux cleaned = 0.00412892 Jy ! Component: 200 - total flux cleaned = 0.00472763 Jy ! Total flux subtracted in 200 components = 0.00472763 Jy ! Clean residual min=-0.038727 max=0.050913 Jy/beam ! Clean residual mean=0.000136 rms=0.011521 Jy/beam ! Combined flux in latest and established models = 0.988783 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.988783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171349Jy sigma=1.959746 ! Fit after self-cal, rms=0.171338Jy sigma=1.959485 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171338Jy sigma=1.959485 ! Fit after self-cal, rms=0.169648Jy sigma=1.936978 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549756 Jy ! Component: 100 - total flux cleaned = 0.00111179 Jy ! Component: 150 - total flux cleaned = 0.00162981 Jy ! Component: 200 - total flux cleaned = 0.00213489 Jy ! Total flux subtracted in 200 components = 0.00213489 Jy ! Clean residual min=-0.038393 max=0.051039 Jy/beam ! Clean residual mean=0.000136 rms=0.011433 Jy/beam ! Combined flux in latest and established models = 0.990918 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.990918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168844Jy sigma=1.927435 ! Fit after self-cal, rms=0.168749Jy sigma=1.925690 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6946 x 1.964 at -1.8 degrees (North through East) ! Clean map min=-0.03617 max=0.75431 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168749Jy sigma=1.925690 ! Fit after self-cal, rms=0.168749Jy sigma=1.925690 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168749Jy sigma=1.925690 ! Fit after self-cal, rms=0.168759Jy sigma=1.925522 ! Inverting map and beam ! Estimated beam: bmin=0.6946 mas, bmaj=1.964 mas, bpa=-1.8 degrees ! Estimated noise=2.32862 mJy/beam. ! Added new window around map position (1.4, 3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561694 Jy ! Component: 100 - total flux cleaned = 0.0635978 Jy ! Component: 150 - total flux cleaned = 0.0671446 Jy ! Component: 200 - total flux cleaned = 0.0671041 Jy ! Total flux subtracted in 200 components = 0.0671041 Jy ! Clean residual min=-0.036143 max=0.046570 Jy/beam ! Clean residual mean=0.000060 rms=0.008505 Jy/beam ! Combined flux in latest and established models = 1.05802 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 1.05802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144776Jy sigma=1.617261 ! Fit after self-cal, rms=0.143388Jy sigma=1.582070 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143388Jy sigma=1.582070 ! Fit after self-cal, rms=0.138996Jy sigma=1.522550 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138996Jy sigma=1.522550 ! Fit after self-cal, rms=0.139049Jy sigma=1.522219 ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.959 mas, bpa=-1.544 degrees ! Estimated noise=2.32315 mJy/beam. ! Added new window around map position (-1, 2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209426 Jy ! Component: 100 - total flux cleaned = 0.0251385 Jy ! Component: 150 - total flux cleaned = 0.0293522 Jy ! Component: 200 - total flux cleaned = 0.031175 Jy ! Total flux subtracted in 200 components = 0.031175 Jy ! Clean residual min=-0.023415 max=0.020671 Jy/beam ! Clean residual mean=0.000032 rms=0.005714 Jy/beam ! Combined flux in latest and established models = 1.0892 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 1.0892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124730Jy sigma=1.378608 ! Fit after self-cal, rms=0.124340Jy sigma=1.371091 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.083 mas, bmaj=6.031 mas, bpa=2.354 degrees ! Estimated noise=3.40347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183099 Jy ! Component: 100 - total flux cleaned = 0.0246383 Jy ! Component: 150 - total flux cleaned = 0.0280629 Jy ! Component: 200 - total flux cleaned = 0.0284187 Jy ! Total flux subtracted in 200 components = 0.0284187 Jy ! Clean residual min=-0.029354 max=0.023633 Jy/beam ! Clean residual mean=-0.000025 rms=0.009130 Jy/beam ! Combined flux in latest and established models = 1.11762 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 1.11762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121099Jy sigma=1.366479 ! Fit after self-cal, rms=0.121059Jy sigma=1.363028 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5915 mas, bmaj=1.896 mas, bpa=-3.42 degrees ! Estimated noise=3.03988 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.631225 Jy ! Component: 100 - total flux cleaned = 0.795282 Jy ! Component: 150 - total flux cleaned = 0.886992 Jy ! Component: 200 - total flux cleaned = 0.946805 Jy ! Total flux subtracted in 200 components = 0.946805 Jy ! Clean residual min=-0.025389 max=0.035530 Jy/beam ! Clean residual mean=0.000014 rms=0.008115 Jy/beam ! Combined flux in latest and established models = 0.946805 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.946805 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.959 mas, bpa=-1.544 degrees ! Estimated noise=2.32315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703122 Jy ! Component: 100 - total flux cleaned = 0.108628 Jy ! Component: 150 - total flux cleaned = 0.133746 Jy ! Component: 200 - total flux cleaned = 0.151562 Jy ! Total flux subtracted in 200 components = 0.151562 Jy ! Clean residual min=-0.021889 max=0.017838 Jy/beam ! Clean residual mean=0.000018 rms=0.005365 Jy/beam ! Combined flux in latest and established models = 1.09837 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 92 components and 1.09837 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.083 mas, bmaj=6.031 mas, bpa=2.354 degrees ! Estimated noise=3.40347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.023934 Jy ! Component: 100 - total flux cleaned = 0.0296053 Jy ! Component: 150 - total flux cleaned = 0.0324825 Jy ! Component: 200 - total flux cleaned = 0.0342019 Jy ! Total flux subtracted in 200 components = 0.0342019 Jy ! Clean residual min=-0.026987 max=0.018724 Jy/beam ! Clean residual mean=-0.000040 rms=0.008673 Jy/beam ! Combined flux in latest and established models = 1.13257 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 125 components and 1.13257 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.959 mas, bpa=-1.544 degrees ! Estimated noise=2.32315 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648147 Jy ! Component: 100 - total flux cleaned = 0.000492105 Jy ! Component: 150 - total flux cleaned = 0.00102046 Jy ! Component: 200 - total flux cleaned = 0.00125361 Jy ! Total flux subtracted in 200 components = 0.00125361 Jy ! Clean residual min=-0.018359 max=0.014619 Jy/beam ! Clean residual mean=-0.000023 rms=0.004376 Jy/beam ! Combined flux in latest and established models = 1.13382 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 150 components and 1.13382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107545Jy sigma=1.233946 ! Fit after self-cal, rms=0.107386Jy sigma=1.231623 wmodel J0222-3441_X_2004_05_08_yyk\_map.mod ! Writing 150 model components to file: J0222-3441_X_2004_05_08_yyk_map.mod wobs J0222-3441_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0222-3441_X_2004_05_08_yyk_uvs.fits wwins J0222-3441_X_2004_05_08_yyk\_map.win ! wwins: Wrote 4 windows to J0222-3441_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00583353 Jy ! Component: 100 - total flux cleaned = -0.00977272 Jy ! Component: 150 - total flux cleaned = -0.0142136 Jy ! Component: 200 - total flux cleaned = -0.017953 Jy ! Component: 250 - total flux cleaned = -0.0207135 Jy ! Component: 300 - total flux cleaned = -0.0235245 Jy ! Component: 350 - total flux cleaned = -0.0253045 Jy ! Component: 400 - total flux cleaned = -0.0266757 Jy ! Component: 450 - total flux cleaned = -0.0276631 Jy ! Component: 500 - total flux cleaned = -0.0279788 Jy ! Component: 550 - total flux cleaned = -0.0282838 Jy ! Component: 600 - total flux cleaned = -0.0284332 Jy ! Component: 650 - total flux cleaned = -0.0287261 Jy ! Component: 700 - total flux cleaned = -0.0288677 Jy ! Component: 750 - total flux cleaned = -0.0290008 Jy ! Component: 800 - total flux cleaned = -0.0287334 Jy ! Component: 850 - total flux cleaned = -0.0289916 Jy ! Component: 900 - total flux cleaned = -0.02899 Jy ! Component: 950 - total flux cleaned = -0.0289888 Jy ! Component: 1000 - total flux cleaned = -0.0291077 Jy ! Component: 1050 - total flux cleaned = -0.0288777 Jy ! Component: 1100 - total flux cleaned = -0.0293322 Jy ! Component: 1150 - total flux cleaned = -0.0296635 Jy ! Component: 1200 - total flux cleaned = -0.0298802 Jy ! Component: 1250 - total flux cleaned = -0.0300909 Jy ! Component: 1300 - total flux cleaned = -0.030091 Jy ! Component: 1350 - total flux cleaned = -0.0302959 Jy ! Component: 1400 - total flux cleaned = -0.030498 Jy ! Component: 1450 - total flux cleaned = -0.030596 Jy ! Component: 1500 - total flux cleaned = -0.0307898 Jy ! Component: 1550 - total flux cleaned = -0.0305983 Jy ! Component: 1600 - total flux cleaned = -0.0305975 Jy ! Component: 1650 - total flux cleaned = -0.0308735 Jy ! Component: 1700 - total flux cleaned = -0.0307844 Jy ! Component: 1750 - total flux cleaned = -0.0310551 Jy ! Component: 1800 - total flux cleaned = -0.0312335 Jy ! Component: 1850 - total flux cleaned = -0.0313197 Jy ! Component: 1900 - total flux cleaned = -0.0316639 Jy ! Component: 1950 - total flux cleaned = -0.0319181 Jy ! Component: 2000 - total flux cleaned = -0.0322523 Jy ! Total flux subtracted in 2048 components = -0.0325815 Jy ! Clean residual min=-0.004759 max=0.004306 Jy/beam ! Clean residual mean=-0.000005 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 1.10124 Jy keep ! Adding 167 model components to the UV plane model. ! The established model now contains 317 components and 1.10124 Jy ![Exited script file: muppet] wmap "J0222-3441_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6931 x 1.959 at -1.544 degrees (North through East) ! Clean map min=-0.011886 max=0.69579 Jy/beam ! Writing clean map to FITS file: J0222-3441_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.695793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00172124 device "J0222-3441_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0222-3441_X_2004_05_08_yyk_map.eps/VPS' loglevs 8*100*3*image_rms/peak_flux ! The new contour levels are: ! -5.93707 5.93707 11.8741 23.7483 47.4966 94.9932 print "clev=",int(8*3*image_rms*10000)/10000 ! clev= 0.0413 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.695 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6931 x 1.959 at -1.544 degrees (North through East) ! Clean map min=-0.011886 max=0.69579 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0222-3441_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0222-3441_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0222-3441_X_2004_05_08_yyk_uvs.log closed on Wed Dec 7 01:08:05 2005