! Started logfile: J0222-3441_S_2004_04_30_yyk_uvs.log on Tue Dec 6 23:54:02 2005 obs J0222-3441_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0222-3441_S_2004_04_30_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.869136 visibilities/baseline/integration-bin. ! Found source: J0222-3441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1637 lines of history. ! ! Reading 1408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0222-3441_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.816609 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.273898Jy sigma=3.780805 ! Fit after self-cal, rms=0.273890Jy sigma=3.775834 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.373 mas, bmaj=6.327 mas, bpa=-1.877 degrees ! Estimated noise=2.22525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.641969 Jy ! Component: 100 - total flux cleaned = 0.763821 Jy ! Total flux subtracted in 100 components = 0.763821 Jy ! Clean residual min=-0.022314 max=0.038415 Jy/beam ! Clean residual mean=-0.000617 rms=0.007241 Jy/beam ! Combined flux in latest and established models = 0.76382 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.76382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174331Jy sigma=2.165652 ! Fit after self-cal, rms=0.174043Jy sigma=2.162883 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.139 mas, bpa=-2.072 degrees ! Estimated noise=1.58784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0745778 Jy ! Component: 100 - total flux cleaned = 0.10007 Jy ! Component: 150 - total flux cleaned = 0.109327 Jy ! Component: 200 - total flux cleaned = 0.111612 Jy ! Total flux subtracted in 200 components = 0.111612 Jy ! Clean residual min=-0.019135 max=0.022280 Jy/beam ! Clean residual mean=-0.000495 rms=0.006033 Jy/beam ! Combined flux in latest and established models = 0.875433 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 0.875432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148883Jy sigma=1.817204 ! Fit after self-cal, rms=0.148859Jy sigma=1.816983 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.978128 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.00* KP 0.97 ! LA 1.16 MK 0.98 NL 1.10 OV 0.99 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984018 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.00* KP 0.99 ! LA 1.12 MK 1.01 NL 1.12 OV 0.99 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.148859Jy sigma=1.816983 ! Fit after self-cal, rms=0.142853Jy sigma=1.691154 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142853Jy sigma=1.691154 ! Fit after self-cal, rms=0.142856Jy sigma=1.691128 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=8.048 mas, bpa=-1.659 degrees ! Estimated noise=1.58017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562466 Jy ! Component: 100 - total flux cleaned = 0.00630725 Jy ! Component: 150 - total flux cleaned = 0.00679106 Jy ! Component: 200 - total flux cleaned = 0.00723757 Jy ! Total flux subtracted in 200 components = 0.00723757 Jy ! Clean residual min=-0.012207 max=0.012055 Jy/beam ! Clean residual mean=0.000039 rms=0.003913 Jy/beam ! Combined flux in latest and established models = 0.88267 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.88267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142086Jy sigma=1.682671 ! Fit after self-cal, rms=0.142094Jy sigma=1.682657 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142094Jy sigma=1.682657 ! Fit after self-cal, rms=0.139889Jy sigma=1.646697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798247 Jy ! Component: 100 - total flux cleaned = 0.000875413 Jy ! Component: 150 - total flux cleaned = 0.000960092 Jy ! Component: 200 - total flux cleaned = 0.00103939 Jy ! Total flux subtracted in 200 components = 0.00103939 Jy ! Clean residual min=-0.012647 max=0.012132 Jy/beam ! Clean residual mean=0.000040 rms=0.003888 Jy/beam ! Combined flux in latest and established models = 0.883709 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.883709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139778Jy sigma=1.645641 ! Fit after self-cal, rms=0.139928Jy sigma=1.643376 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.017 x 8.048 at -1.659 degrees (North through East) ! Clean map min=-0.012323 max=0.75694 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139928Jy sigma=1.643376 ! Fit after self-cal, rms=0.138793Jy sigma=1.590417 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138793Jy sigma=1.590417 ! Fit after self-cal, rms=0.138903Jy sigma=1.590195 ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=7.985 mas, bpa=-1.432 degrees ! Estimated noise=1.61191 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.017967 Jy ! Component: 100 - total flux cleaned = 0.0243959 Jy ! Component: 150 - total flux cleaned = 0.0260962 Jy ! Component: 200 - total flux cleaned = 0.0262648 Jy ! Total flux subtracted in 200 components = 0.0262648 Jy ! Clean residual min=-0.013976 max=0.013650 Jy/beam ! Clean residual mean=0.000064 rms=0.004090 Jy/beam ! Combined flux in latest and established models = 0.909974 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.909974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136082Jy sigma=1.565141 ! Fit after self-cal, rms=0.136121Jy sigma=1.565107 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136121Jy sigma=1.565107 ! Fit after self-cal, rms=0.136739Jy sigma=1.555398 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136739Jy sigma=1.555398 ! Fit after self-cal, rms=0.136747Jy sigma=1.555323 ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.909 mas, bpa=-0.8648 degrees ! Estimated noise=1.62345 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126192 Jy ! Component: 100 - total flux cleaned = 0.0159175 Jy ! Component: 150 - total flux cleaned = 0.0161852 Jy ! Component: 200 - total flux cleaned = 0.016431 Jy ! Total flux subtracted in 200 components = 0.016431 Jy ! Clean residual min=-0.013040 max=0.013874 Jy/beam ! Clean residual mean=0.000038 rms=0.003893 Jy/beam ! Combined flux in latest and established models = 0.926405 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.926405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135205Jy sigma=1.542649 ! Fit after self-cal, rms=0.135209Jy sigma=1.542632 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.123 mas, bmaj=27.32 mas, bpa=2.006 degrees ! Estimated noise=2.13279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059597 Jy ! Component: 100 - total flux cleaned = 0.00609337 Jy ! Component: 150 - total flux cleaned = 0.00633776 Jy ! Component: 200 - total flux cleaned = 0.00646338 Jy ! Total flux subtracted in 200 components = 0.00646338 Jy ! Clean residual min=-0.015923 max=0.016020 Jy/beam ! Clean residual mean=0.000147 rms=0.005585 Jy/beam ! Combined flux in latest and established models = 0.932869 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.932869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134979Jy sigma=1.543775 ! Fit after self-cal, rms=0.134953Jy sigma=1.543643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.345 mas, bmaj=6.297 mas, bpa=-1.295 degrees ! Estimated noise=2.25197 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.649927 Jy ! Component: 100 - total flux cleaned = 0.780738 Jy ! Component: 150 - total flux cleaned = 0.83885 Jy ! Component: 200 - total flux cleaned = 0.868744 Jy ! Total flux subtracted in 200 components = 0.868744 Jy ! Clean residual min=-0.016275 max=0.018047 Jy/beam ! Clean residual mean=-0.000137 rms=0.004891 Jy/beam ! Combined flux in latest and established models = 0.868744 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.868744 Jy ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.909 mas, bpa=-0.8648 degrees ! Estimated noise=1.62345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359096 Jy ! Component: 100 - total flux cleaned = 0.0494911 Jy ! Component: 150 - total flux cleaned = 0.0546607 Jy ! Component: 200 - total flux cleaned = 0.0556925 Jy ! Total flux subtracted in 200 components = 0.0556925 Jy ! Clean residual min=-0.012998 max=0.013409 Jy/beam ! Clean residual mean=0.000034 rms=0.003964 Jy/beam ! Combined flux in latest and established models = 0.924436 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.924436 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.123 mas, bmaj=27.32 mas, bpa=2.006 degrees ! Estimated noise=2.13279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643198 Jy ! Component: 100 - total flux cleaned = 0.00670274 Jy ! Component: 150 - total flux cleaned = 0.00683597 Jy ! Component: 200 - total flux cleaned = 0.00696896 Jy ! Total flux subtracted in 200 components = 0.00696896 Jy ! Clean residual min=-0.016114 max=0.016659 Jy/beam ! Clean residual mean=0.000144 rms=0.005673 Jy/beam ! Combined flux in latest and established models = 0.931405 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.931405 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.909 mas, bpa=-0.8648 degrees ! Estimated noise=1.62345 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00530104 Jy ! Component: 100 - total flux cleaned = -0.00551886 Jy ! Component: 150 - total flux cleaned = -0.0054593 Jy ! Component: 200 - total flux cleaned = -0.0053971 Jy ! Total flux subtracted in 200 components = -0.0053971 Jy ! Clean residual min=-0.012748 max=0.013419 Jy/beam ! Clean residual mean=0.000036 rms=0.003907 Jy/beam ! Combined flux in latest and established models = 0.926008 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.926008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135296Jy sigma=1.543663 ! Fit after self-cal, rms=0.135311Jy sigma=1.543602 wmodel J0222-3441_S_2004_04_30_yyk\_map.mod ! Writing 58 model components to file: J0222-3441_S_2004_04_30_yyk_map.mod wobs J0222-3441_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0222-3441_S_2004_04_30_yyk_uvs.fits wwins J0222-3441_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0222-3441_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272961 Jy ! Component: 100 - total flux cleaned = 0.00319593 Jy ! Component: 150 - total flux cleaned = 0.00278264 Jy ! Component: 200 - total flux cleaned = 0.00297301 Jy ! Component: 250 - total flux cleaned = 0.00386215 Jy ! Component: 300 - total flux cleaned = 0.00436469 Jy ! Component: 350 - total flux cleaned = 0.00566154 Jy ! Component: 400 - total flux cleaned = 0.00659714 Jy ! Component: 450 - total flux cleaned = 0.00765146 Jy ! Component: 500 - total flux cleaned = 0.00852589 Jy ! Component: 550 - total flux cleaned = 0.00880813 Jy ! Component: 600 - total flux cleaned = 0.00935845 Jy ! Component: 650 - total flux cleaned = 0.00989269 Jy ! Component: 700 - total flux cleaned = 0.0105436 Jy ! Component: 750 - total flux cleaned = 0.0110529 Jy ! Component: 800 - total flux cleaned = 0.0119262 Jy ! Component: 850 - total flux cleaned = 0.0127771 Jy ! Component: 900 - total flux cleaned = 0.0134917 Jy ! Component: 950 - total flux cleaned = 0.014425 Jy ! Component: 1000 - total flux cleaned = 0.0152209 Jy ! Component: 1050 - total flux cleaned = 0.0155562 Jy ! Component: 1100 - total flux cleaned = 0.0163228 Jy ! Component: 1150 - total flux cleaned = 0.0166455 Jy ! Component: 1200 - total flux cleaned = 0.0168576 Jy ! Component: 1250 - total flux cleaned = 0.0172716 Jy ! Component: 1300 - total flux cleaned = 0.0174743 Jy ! Component: 1350 - total flux cleaned = 0.0172732 Jy ! Component: 1400 - total flux cleaned = 0.0176695 Jy ! Component: 1450 - total flux cleaned = 0.0178638 Jy ! Component: 1500 - total flux cleaned = 0.0180561 Jy ! Component: 1550 - total flux cleaned = 0.0182443 Jy ! Component: 1600 - total flux cleaned = 0.0184298 Jy ! Component: 1650 - total flux cleaned = 0.0186127 Jy ! Component: 1700 - total flux cleaned = 0.0185214 Jy ! Component: 1750 - total flux cleaned = 0.018521 Jy ! Component: 1800 - total flux cleaned = 0.0184338 Jy ! Component: 1850 - total flux cleaned = 0.0182595 Jy ! Component: 1900 - total flux cleaned = 0.0180029 Jy ! Component: 1950 - total flux cleaned = 0.0180889 Jy ! Component: 2000 - total flux cleaned = 0.0183399 Jy ! Total flux subtracted in 2048 components = 0.0180087 Jy ! Clean residual min=-0.004519 max=0.004873 Jy/beam ! Clean residual mean=-0.000010 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.944017 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 202 components and 0.944017 Jy ![Exited script file: muppet] wmap "J0222-3441_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.943 x 7.909 at -0.8648 degrees (North through East) ! Clean map min=-0.0088936 max=0.76556 Jy/beam ! Writing clean map to FITS file: J0222-3441_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.76556 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0018274 device "J0222-3441_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0222-3441_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.716103 0.716103 1.43221 2.86441 5.72883 11.4577 22.9153 45.8306 91.6612 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0054 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.765 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.943 x 7.909 at -0.8648 degrees (North through East) ! Clean map min=-0.0088936 max=0.76556 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0222-3441_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0222-3441_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0222-3441_S_2004_04_30_yyk_uvs.log closed on Tue Dec 6 23:54:07 2005