! Started logfile: J0208-2650_S_2004_05_27_yyk_uvs.log on Tue Dec 6 23:53:20 2005 obs J0208-2650_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0208-2650_S_2004_05_27_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0208-2650 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 2880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0208-2650_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.222959 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.796750Jy sigma=12.353528 ! Fit after self-cal, rms=0.796671Jy sigma=12.352455 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.412 mas, bmaj=6.782 mas, bpa=-3.869 degrees ! Estimated noise=1.30974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.17763 Jy ! Component: 100 - total flux cleaned = 0.200741 Jy ! Total flux subtracted in 100 components = 0.200741 Jy ! Clean residual min=-0.005582 max=0.005366 Jy/beam ! Clean residual mean=-0.000003 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.200741 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.200741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081822Jy sigma=1.068781 ! Fit after self-cal, rms=0.081823Jy sigma=1.068714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=8.365 mas, bpa=-3.804 degrees ! Estimated noise=0.900948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466638 Jy ! Component: 100 - total flux cleaned = 0.00608985 Jy ! Component: 150 - total flux cleaned = 0.00632439 Jy ! Component: 200 - total flux cleaned = 0.00655149 Jy ! Total flux subtracted in 200 components = 0.00655149 Jy ! Clean residual min=-0.004346 max=0.004522 Jy/beam ! Clean residual mean=-0.000058 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.207293 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 29 components and 0.207293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081463Jy sigma=1.065443 ! Fit after self-cal, rms=0.081462Jy sigma=1.065412 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00019 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.99 KP 0.96 ! LA 1.09 MK 0.96 NL 1.01 OV 0.93 ! PT 1.06 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.964803 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 1.17 KP 1.01 ! LA 1.02 MK 1.06 NL 1.04 OV 0.99 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.998654 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.05 KP 1.02 ! LA 0.93 MK 0.98 NL 1.06 OV 1.02 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.081462Jy sigma=1.065412 ! Fit after self-cal, rms=0.080475Jy sigma=1.049393 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080475Jy sigma=1.049393 ! Fit after self-cal, rms=0.080479Jy sigma=1.049378 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=8.274 mas, bpa=-3.342 degrees ! Estimated noise=0.897057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108747 Jy ! Component: 100 - total flux cleaned = 0.00113013 Jy ! Component: 150 - total flux cleaned = 0.00113452 Jy ! Component: 200 - total flux cleaned = 0.00113556 Jy ! Total flux subtracted in 200 components = 0.00113556 Jy ! Clean residual min=-0.003086 max=0.003978 Jy/beam ! Clean residual mean=-0.000015 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.208429 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.208429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080435Jy sigma=1.048723 ! Fit after self-cal, rms=0.080435Jy sigma=1.048698 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080435Jy sigma=1.048698 ! Fit after self-cal, rms=0.078146Jy sigma=1.011116 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451573 Jy ! Component: 100 - total flux cleaned = 0.000536527 Jy ! Component: 150 - total flux cleaned = 0.000619708 Jy ! Component: 200 - total flux cleaned = 0.000672596 Jy ! Total flux subtracted in 200 components = 0.000672596 Jy ! Clean residual min=-0.003054 max=0.004013 Jy/beam ! Clean residual mean=-0.000015 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.209101 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.209101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078116Jy sigma=1.010975 ! Fit after self-cal, rms=0.078082Jy sigma=1.008929 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.051 x 8.274 at -3.342 degrees (North through East) ! Clean map min=-0.0029223 max=0.20367 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078082Jy sigma=1.008929 ! Fit after self-cal, rms=0.077570Jy sigma=0.988414 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077570Jy sigma=0.988414 ! Fit after self-cal, rms=0.077604Jy sigma=0.988198 ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.246 mas, bpa=-3.318 degrees ! Estimated noise=0.904311 mJy/beam. ! Added new window around map position (-1, -54.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036695 Jy ! Component: 100 - total flux cleaned = 0.00409414 Jy ! Component: 150 - total flux cleaned = 0.00442679 Jy ! Component: 200 - total flux cleaned = 0.00470209 Jy ! Total flux subtracted in 200 components = 0.00470209 Jy ! Clean residual min=-0.002705 max=0.003321 Jy/beam ! Clean residual mean=-0.000007 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.213803 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.213803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077371Jy sigma=0.985025 ! Fit after self-cal, rms=0.077377Jy sigma=0.984903 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077377Jy sigma=0.984903 ! Fit after self-cal, rms=0.077963Jy sigma=0.973280 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077963Jy sigma=0.973280 ! Fit after self-cal, rms=0.077981Jy sigma=0.973232 ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.216 mas, bpa=-3.477 degrees ! Estimated noise=0.910371 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183042 Jy ! Component: 100 - total flux cleaned = 0.00210901 Jy ! Component: 150 - total flux cleaned = 0.00229117 Jy ! Component: 200 - total flux cleaned = 0.00241315 Jy ! Total flux subtracted in 200 components = 0.00241315 Jy ! Clean residual min=-0.002762 max=0.003179 Jy/beam ! Clean residual mean=-0.000005 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.216216 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 84 components and 0.216216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077851Jy sigma=0.971957 ! Fit after self-cal, rms=0.077857Jy sigma=0.971943 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.964 mas, bmaj=20.9 mas, bpa=0.9699 degrees ! Estimated noise=1.17935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563049 Jy ! Component: 100 - total flux cleaned = 0.000538288 Jy ! Component: 150 - total flux cleaned = 0.000489449 Jy ! Component: 200 - total flux cleaned = 0.000421952 Jy ! Total flux subtracted in 200 components = 0.000421952 Jy ! Clean residual min=-0.002773 max=0.002881 Jy/beam ! Clean residual mean=-0.000018 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.216638 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 0.216638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077839Jy sigma=0.971944 ! Fit after self-cal, rms=0.077835Jy sigma=0.971907 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=6.734 mas, bpa=-3.694 degrees ! Estimated noise=1.32704 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.180697 Jy ! Component: 100 - total flux cleaned = 0.204591 Jy ! Component: 150 - total flux cleaned = 0.21204 Jy ! Component: 200 - total flux cleaned = 0.215199 Jy ! Total flux subtracted in 200 components = 0.215199 Jy ! Clean residual min=-0.004674 max=0.005541 Jy/beam ! Clean residual mean=0.000015 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.215199 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.215199 Jy ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.216 mas, bpa=-3.477 degrees ! Estimated noise=0.910371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.11538e-05 Jy ! Component: 100 - total flux cleaned = 0.000289698 Jy ! Component: 150 - total flux cleaned = 0.000633795 Jy ! Component: 200 - total flux cleaned = 0.00082994 Jy ! Total flux subtracted in 200 components = 0.00082994 Jy ! Clean residual min=-0.002772 max=0.003163 Jy/beam ! Clean residual mean=-0.000006 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.216029 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.216029 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.964 mas, bmaj=20.9 mas, bpa=0.9699 degrees ! Estimated noise=1.17935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310526 Jy ! Component: 100 - total flux cleaned = 0.00031815 Jy ! Component: 150 - total flux cleaned = 0.000321294 Jy ! Component: 200 - total flux cleaned = 0.00032216 Jy ! Total flux subtracted in 200 components = 0.00032216 Jy ! Clean residual min=-0.002780 max=0.002885 Jy/beam ! Clean residual mean=-0.000018 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.216351 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.216351 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.216 mas, bpa=-3.477 degrees ! Estimated noise=0.910371 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.96215e-05 Jy ! Component: 100 - total flux cleaned = -2.39757e-05 Jy ! Component: 150 - total flux cleaned = -2.23449e-05 Jy ! Component: 200 - total flux cleaned = 1.41689e-05 Jy ! Total flux subtracted in 200 components = 1.41689e-05 Jy ! Clean residual min=-0.002699 max=0.003238 Jy/beam ! Clean residual mean=-0.000004 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.216365 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.216365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077818Jy sigma=0.971792 ! Fit after self-cal, rms=0.077817Jy sigma=0.971776 wmodel J0208-2650_S_2004_05_27_yyk\_map.mod ! Writing 68 model components to file: J0208-2650_S_2004_05_27_yyk_map.mod wobs J0208-2650_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0208-2650_S_2004_05_27_yyk_uvs.fits wwins J0208-2650_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J0208-2650_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000977914 Jy ! Component: 100 - total flux cleaned = 0.00117652 Jy ! Component: 150 - total flux cleaned = 0.00126646 Jy ! Component: 200 - total flux cleaned = 0.00139661 Jy ! Component: 250 - total flux cleaned = 0.00152285 Jy ! Component: 300 - total flux cleaned = 0.00152404 Jy ! Component: 350 - total flux cleaned = 0.00164192 Jy ! Component: 400 - total flux cleaned = 0.001756 Jy ! Component: 450 - total flux cleaned = 0.00179276 Jy ! Component: 500 - total flux cleaned = 0.00182782 Jy ! Component: 550 - total flux cleaned = 0.00182757 Jy ! Component: 600 - total flux cleaned = 0.00196341 Jy ! Component: 650 - total flux cleaned = 0.00186212 Jy ! Component: 700 - total flux cleaned = 0.00179768 Jy ! Component: 750 - total flux cleaned = 0.00189452 Jy ! Component: 800 - total flux cleaned = 0.00183133 Jy ! Component: 850 - total flux cleaned = 0.00183133 Jy ! Component: 900 - total flux cleaned = 0.00183094 Jy ! Component: 950 - total flux cleaned = 0.00180103 Jy ! Component: 1000 - total flux cleaned = 0.00182961 Jy ! Component: 1050 - total flux cleaned = 0.00174175 Jy ! Component: 1100 - total flux cleaned = 0.00171275 Jy ! Component: 1150 - total flux cleaned = 0.00162835 Jy ! Component: 1200 - total flux cleaned = 0.00165636 Jy ! Component: 1250 - total flux cleaned = 0.00162873 Jy ! Component: 1300 - total flux cleaned = 0.00154752 Jy ! Component: 1350 - total flux cleaned = 0.00160172 Jy ! Component: 1400 - total flux cleaned = 0.00157532 Jy ! Component: 1450 - total flux cleaned = 0.00165392 Jy ! Component: 1500 - total flux cleaned = 0.00152464 Jy ! Component: 1550 - total flux cleaned = 0.00152433 Jy ! Component: 1600 - total flux cleaned = 0.00142313 Jy ! Component: 1650 - total flux cleaned = 0.00134824 Jy ! Component: 1700 - total flux cleaned = 0.00122533 Jy ! Component: 1750 - total flux cleaned = 0.00112841 Jy ! Component: 1800 - total flux cleaned = 0.00105666 Jy ! Component: 1850 - total flux cleaned = 0.000914347 Jy ! Component: 1900 - total flux cleaned = 0.00079708 Jy ! Component: 1950 - total flux cleaned = 0.000704322 Jy ! Component: 2000 - total flux cleaned = 0.000612355 Jy ! Total flux subtracted in 2048 components = 0.00049844 Jy ! Clean residual min=-0.001206 max=0.001636 Jy/beam ! Clean residual mean=-0.000006 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.216864 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 190 components and 0.216864 Jy ![Exited script file: muppet] wmap "J0208-2650_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.216 at -3.477 degrees (North through East) ! Clean map min=-0.002421 max=0.20795 Jy/beam ! Writing clean map to FITS file: J0208-2650_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.207952 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000465786 device "J0208-2650_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0208-2650_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.671961 0.671961 1.34392 2.68785 5.37569 10.7514 21.5028 43.0055 86.0111 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.207 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.216 at -3.477 degrees (North through East) ! Clean map min=-0.002421 max=0.20795 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0208-2650_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0208-2650_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0208-2650_S_2004_05_27_yyk_uvs.log closed on Tue Dec 6 23:53:24 2005