! Started logfile: J0124-3416_S_2004_04_30_yyk_uvs.log on Tue Dec 6 23:51:14 2005 obs J0124-3416_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0124-3416_S_2004_04_30_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.806667 visibilities/baseline/integration-bin. ! Found source: J0124-3416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1633 lines of history. ! ! Reading 1452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0124-3416_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.135976 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883844Jy sigma=13.937372 ! Fit after self-cal, rms=0.883749Jy sigma=13.950153 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.524 mas, bmaj=6.911 mas, bpa=-3.642 degrees ! Estimated noise=2.60824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.100668 Jy ! Component: 100 - total flux cleaned = 0.114258 Jy ! Total flux subtracted in 100 components = 0.114258 Jy ! Clean residual min=-0.006638 max=0.006509 Jy/beam ! Clean residual mean=-0.000106 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.114258 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.114258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066399Jy sigma=0.975620 ! Fit after self-cal, rms=0.066377Jy sigma=0.975165 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.521 mas, bpa=-5.324 degrees ! Estimated noise=1.36577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525346 Jy ! Component: 100 - total flux cleaned = 0.00687133 Jy ! Component: 150 - total flux cleaned = 0.00700924 Jy ! Component: 200 - total flux cleaned = 0.00709824 Jy ! Total flux subtracted in 200 components = 0.00709824 Jy ! Clean residual min=-0.005439 max=0.004085 Jy/beam ! Clean residual mean=-0.000088 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.121356 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.121356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066013Jy sigma=0.970694 ! Fit after self-cal, rms=0.065999Jy sigma=0.970603 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.998752 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 1.00* KP 0.89 ! LA 1.00* MK 0.95 NL 0.98 OV 1.00* ! PT 1.00 SC 1.13 ! ! ! Fit before self-cal, rms=0.065999Jy sigma=0.970603 ! Fit after self-cal, rms=0.065873Jy sigma=0.967838 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065873Jy sigma=0.967838 ! Fit after self-cal, rms=0.065873Jy sigma=0.967836 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.618 mas, bpa=-6.025 degrees ! Estimated noise=1.36071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000545774 Jy ! Component: 100 - total flux cleaned = -0.000588232 Jy ! Component: 150 - total flux cleaned = -0.000618782 Jy ! Component: 200 - total flux cleaned = -0.000588707 Jy ! Total flux subtracted in 200 components = -0.000588707 Jy ! Clean residual min=-0.005057 max=0.003964 Jy/beam ! Clean residual mean=-0.000051 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.120767 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.120767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065837Jy sigma=0.967328 ! Fit after self-cal, rms=0.065835Jy sigma=0.967309 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065835Jy sigma=0.967309 ! Fit after self-cal, rms=0.062193Jy sigma=0.908255 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181665 Jy ! Component: 100 - total flux cleaned = 0.00196627 Jy ! Component: 150 - total flux cleaned = 0.0020848 Jy ! Component: 200 - total flux cleaned = 0.00213537 Jy ! Total flux subtracted in 200 components = 0.00213537 Jy ! Clean residual min=-0.005737 max=0.004370 Jy/beam ! Clean residual mean=-0.000052 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.122903 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.122903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062101Jy sigma=0.907446 ! Fit after self-cal, rms=0.061936Jy sigma=0.903973 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 8.618 at -6.025 degrees (North through East) ! Clean map min=-0.0056016 max=0.11532 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061936Jy sigma=0.903973 ! Fit after self-cal, rms=0.061482Jy sigma=0.898325 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061482Jy sigma=0.898325 ! Fit after self-cal, rms=0.061505Jy sigma=0.897938 ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.657 mas, bpa=-6.597 degrees ! Estimated noise=1.34362 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109242 Jy ! Component: 100 - total flux cleaned = -0.00111851 Jy ! Component: 150 - total flux cleaned = -0.00119291 Jy ! Component: 200 - total flux cleaned = -0.00121551 Jy ! Total flux subtracted in 200 components = -0.00121551 Jy ! Clean residual min=-0.005540 max=0.003916 Jy/beam ! Clean residual mean=-0.000051 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.121687 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.121687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061504Jy sigma=0.897366 ! Fit after self-cal, rms=0.061506Jy sigma=0.897296 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061506Jy sigma=0.897296 ! Fit after self-cal, rms=0.061206Jy sigma=0.901134 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061206Jy sigma=0.901134 ! Fit after self-cal, rms=0.061204Jy sigma=0.900756 ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.538 mas, bpa=-6.924 degrees ! Estimated noise=1.33984 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115253 Jy ! Component: 100 - total flux cleaned = 0.00124158 Jy ! Component: 150 - total flux cleaned = 0.00133977 Jy ! Component: 200 - total flux cleaned = 0.00139156 Jy ! Total flux subtracted in 200 components = 0.00139156 Jy ! Clean residual min=-0.005245 max=0.004415 Jy/beam ! Clean residual mean=0.000012 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.123079 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.123079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061201Jy sigma=0.899866 ! Fit after self-cal, rms=0.061202Jy sigma=0.899813 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.464 mas, bmaj=28.98 mas, bpa=-0.7358 degrees ! Estimated noise=1.69767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473317 Jy ! Component: 100 - total flux cleaned = 0.000474229 Jy ! Component: 150 - total flux cleaned = 0.000492131 Jy ! Component: 200 - total flux cleaned = 0.000508117 Jy ! Total flux subtracted in 200 components = 0.000508117 Jy ! Clean residual min=-0.005054 max=0.004806 Jy/beam ! Clean residual mean=0.000022 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.123587 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.123587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061195Jy sigma=0.899816 ! Fit after self-cal, rms=0.061195Jy sigma=0.899778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=6.923 mas, bpa=-4.316 degrees ! Estimated noise=2.57832 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101257 Jy ! Component: 100 - total flux cleaned = 0.115642 Jy ! Component: 150 - total flux cleaned = 0.118791 Jy ! Component: 200 - total flux cleaned = 0.119417 Jy ! Total flux subtracted in 200 components = 0.119417 Jy ! Clean residual min=-0.008080 max=0.007045 Jy/beam ! Clean residual mean=-0.000042 rms=0.002014 Jy/beam ! Combined flux in latest and established models = 0.119417 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.119417 Jy ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.538 mas, bpa=-6.924 degrees ! Estimated noise=1.33984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257752 Jy ! Component: 100 - total flux cleaned = 0.00284436 Jy ! Component: 150 - total flux cleaned = 0.00300638 Jy ! Component: 200 - total flux cleaned = 0.00318674 Jy ! Total flux subtracted in 200 components = 0.00318674 Jy ! Clean residual min=-0.005465 max=0.004569 Jy/beam ! Clean residual mean=0.000012 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.122604 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.122604 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.464 mas, bmaj=28.98 mas, bpa=-0.7358 degrees ! Estimated noise=1.69767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725563 Jy ! Component: 100 - total flux cleaned = 0.000751494 Jy ! Component: 150 - total flux cleaned = 0.000774817 Jy ! Component: 200 - total flux cleaned = 0.000795532 Jy ! Total flux subtracted in 200 components = 0.000795532 Jy ! Clean residual min=-0.005076 max=0.004860 Jy/beam ! Clean residual mean=0.000023 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.1234 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.1234 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.538 mas, bpa=-6.924 degrees ! Estimated noise=1.33984 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000652921 Jy ! Component: 100 - total flux cleaned = -0.000495474 Jy ! Component: 150 - total flux cleaned = -0.000460445 Jy ! Component: 200 - total flux cleaned = -0.000458845 Jy ! Total flux subtracted in 200 components = -0.000458845 Jy ! Clean residual min=-0.005361 max=0.004638 Jy/beam ! Clean residual mean=0.000012 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.122941 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.122941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061236Jy sigma=0.900508 ! Fit after self-cal, rms=0.061230Jy sigma=0.900336 wmodel J0124-3416_S_2004_04_30_yyk\_map.mod ! Writing 45 model components to file: J0124-3416_S_2004_04_30_yyk_map.mod wobs J0124-3416_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0124-3416_S_2004_04_30_yyk_uvs.fits wwins J0124-3416_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0124-3416_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155946 Jy ! Component: 100 - total flux cleaned = -0.00156227 Jy ! Component: 150 - total flux cleaned = -0.00149722 Jy ! Component: 200 - total flux cleaned = -0.00173938 Jy ! Component: 250 - total flux cleaned = -0.00185425 Jy ! Component: 300 - total flux cleaned = -0.00174869 Jy ! Component: 350 - total flux cleaned = -0.00149988 Jy ! Component: 400 - total flux cleaned = -0.00164612 Jy ! Component: 450 - total flux cleaned = -0.00173795 Jy ! Component: 500 - total flux cleaned = -0.00178358 Jy ! Component: 550 - total flux cleaned = -0.00186908 Jy ! Component: 600 - total flux cleaned = -0.00178381 Jy ! Component: 650 - total flux cleaned = -0.00174456 Jy ! Component: 700 - total flux cleaned = -0.00174523 Jy ! Component: 750 - total flux cleaned = -0.00166825 Jy ! Component: 800 - total flux cleaned = -0.00166823 Jy ! Component: 850 - total flux cleaned = -0.00166765 Jy ! Component: 900 - total flux cleaned = -0.00173781 Jy ! Component: 950 - total flux cleaned = -0.00177168 Jy ! Component: 1000 - total flux cleaned = -0.00177125 Jy ! Component: 1050 - total flux cleaned = -0.00177154 Jy ! Component: 1100 - total flux cleaned = -0.00190083 Jy ! Component: 1150 - total flux cleaned = -0.00186932 Jy ! Component: 1200 - total flux cleaned = -0.00196311 Jy ! Component: 1250 - total flux cleaned = -0.00208491 Jy ! Component: 1300 - total flux cleaned = -0.00211471 Jy ! Component: 1350 - total flux cleaned = -0.00217314 Jy ! Component: 1400 - total flux cleaned = -0.00225913 Jy ! Component: 1450 - total flux cleaned = -0.00231515 Jy ! Component: 1500 - total flux cleaned = -0.00231462 Jy ! Component: 1550 - total flux cleaned = -0.00231437 Jy ! Component: 1600 - total flux cleaned = -0.00231434 Jy ! Component: 1650 - total flux cleaned = -0.00231414 Jy ! Component: 1700 - total flux cleaned = -0.00226321 Jy ! Component: 1750 - total flux cleaned = -0.00244041 Jy ! Component: 1800 - total flux cleaned = -0.00253993 Jy ! Component: 1850 - total flux cleaned = -0.00258886 Jy ! Component: 1900 - total flux cleaned = -0.00268568 Jy ! Component: 1950 - total flux cleaned = -0.00275711 Jy ! Component: 2000 - total flux cleaned = -0.00273365 Jy ! Total flux subtracted in 2048 components = -0.00284986 Jy ! Clean residual min=-0.001432 max=0.001731 Jy/beam ! Clean residual mean=-0.000016 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.120091 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 175 components and 0.120091 Jy ![Exited script file: muppet] wmap "J0124-3416_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 8.538 at -6.924 degrees (North through East) ! Clean map min=-0.0038255 max=0.11316 Jy/beam ! Writing clean map to FITS file: J0124-3416_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113164 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00045653 device "J0124-3416_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0124-3416_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21027 1.21027 2.42053 4.84107 9.68213 19.3643 38.7285 77.4571 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.117 x 8.538 at -6.924 degrees (North through East) ! Clean map min=-0.0038255 max=0.11316 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0124-3416_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0124-3416_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0124-3416_S_2004_04_30_yyk_uvs.log closed on Tue Dec 6 23:51:18 2005