! Started logfile: J0115-3049_X_2004_04_30_yyk_uvs.log on Tue Dec 6 23:50:53 2005 obs J0115-3049_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0115-3049_X_2004_04_30_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.924444 visibilities/baseline/integration-bin. ! Found source: J0115-3049 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1545 lines of history. ! ! Reading 832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0115-3049_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.354896 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.690779Jy sigma=11.243239 ! Fit after self-cal, rms=0.690960Jy sigma=11.241855 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6763 mas, bmaj=1.867 mas, bpa=-5.488 degrees ! Estimated noise=2.32182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.265107 Jy ! Component: 100 - total flux cleaned = 0.355259 Jy ! Total flux subtracted in 100 components = 0.355259 Jy ! Clean residual min=-0.013661 max=0.028344 Jy/beam ! Clean residual mean=-0.000195 rms=0.005209 Jy/beam ! Combined flux in latest and established models = 0.355259 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.355259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093835Jy sigma=1.480922 ! Fit after self-cal, rms=0.093734Jy sigma=1.478640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8695 mas, bmaj=2.332 mas, bpa=-6.912 degrees ! Estimated noise=1.55111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549484 Jy ! Component: 100 - total flux cleaned = 0.0721476 Jy ! Component: 150 - total flux cleaned = 0.0786229 Jy ! Component: 200 - total flux cleaned = 0.080795 Jy ! Total flux subtracted in 200 components = 0.080795 Jy ! Clean residual min=-0.008322 max=0.008146 Jy/beam ! Clean residual mean=0.000034 rms=0.002386 Jy/beam ! Combined flux in latest and established models = 0.436054 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 38 components and 0.436054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074396Jy sigma=1.075850 ! Fit after self-cal, rms=0.074400Jy sigma=1.075697 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.006 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.10 KP 0.97 ! LA 0.99 MK 0.96 NL 1.00 OV 1.02 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01301 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.11 KP 0.94 ! LA 0.95 MK 0.98 NL 0.99 OV 0.97 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.982818 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.12 KP 0.89 ! LA 0.98 MK 1.05 NL 1.02 OV 1.01 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.074400Jy sigma=1.075697 ! Fit after self-cal, rms=0.072747Jy sigma=1.038384 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072747Jy sigma=1.038384 ! Fit after self-cal, rms=0.072754Jy sigma=1.038370 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8633 mas, bmaj=2.295 mas, bpa=-6.07 degrees ! Estimated noise=1.52959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00340198 Jy ! Component: 100 - total flux cleaned = -0.00374201 Jy ! Component: 150 - total flux cleaned = -0.00390201 Jy ! Component: 200 - total flux cleaned = -0.00407048 Jy ! Total flux subtracted in 200 components = -0.00407048 Jy ! Clean residual min=-0.006291 max=0.006878 Jy/beam ! Clean residual mean=0.000016 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 0.431984 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.431984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072563Jy sigma=1.035722 ! Fit after self-cal, rms=0.072562Jy sigma=1.035646 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072562Jy sigma=1.035646 ! Fit after self-cal, rms=0.069709Jy sigma=0.993268 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.94066e-05 Jy ! Component: 100 - total flux cleaned = 9.65112e-05 Jy ! Component: 150 - total flux cleaned = 9.06133e-05 Jy ! Component: 200 - total flux cleaned = 6.20483e-05 Jy ! Total flux subtracted in 200 components = 6.20483e-05 Jy ! Clean residual min=-0.006086 max=0.006745 Jy/beam ! Clean residual mean=0.000014 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.432046 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.432046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069689Jy sigma=0.992714 ! Fit after self-cal, rms=0.069536Jy sigma=0.989799 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8633 x 2.295 at -6.07 degrees (North through East) ! Clean map min=-0.0056498 max=0.3153 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069536Jy sigma=0.989799 ! Fit after self-cal, rms=0.068741Jy sigma=0.978851 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068741Jy sigma=0.978851 ! Fit after self-cal, rms=0.068759Jy sigma=0.978613 ! Inverting map and beam ! Estimated beam: bmin=0.8619 mas, bmaj=2.291 mas, bpa=-6.007 degrees ! Estimated noise=1.51287 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321715 Jy ! Component: 100 - total flux cleaned = -0.00387878 Jy ! Component: 150 - total flux cleaned = -0.00399482 Jy ! Component: 200 - total flux cleaned = -0.00406707 Jy ! Total flux subtracted in 200 components = -0.00406707 Jy ! Clean residual min=-0.005484 max=0.006397 Jy/beam ! Clean residual mean=0.000016 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.427979 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.427979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068653Jy sigma=0.976500 ! Fit after self-cal, rms=0.068670Jy sigma=0.976440 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068670Jy sigma=0.976440 ! Fit after self-cal, rms=0.068085Jy sigma=0.973762 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068085Jy sigma=0.973762 ! Fit after self-cal, rms=0.068085Jy sigma=0.973744 ! Inverting map and beam ! Estimated beam: bmin=0.8576 mas, bmaj=2.285 mas, bpa=-6.352 degrees ! Estimated noise=1.50045 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00215611 Jy ! Component: 100 - total flux cleaned = -0.00216276 Jy ! Component: 150 - total flux cleaned = -0.0021267 Jy ! Component: 200 - total flux cleaned = -0.00206887 Jy ! Total flux subtracted in 200 components = -0.00206887 Jy ! Clean residual min=-0.005553 max=0.006191 Jy/beam ! Clean residual mean=0.000003 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.42591 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.42591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067988Jy sigma=0.972216 ! Fit after self-cal, rms=0.067992Jy sigma=0.972200 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=7.126 mas, bpa=-1.266 degrees ! Estimated noise=1.91233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000873792 Jy ! Component: 100 - total flux cleaned = 0.000913732 Jy ! Component: 150 - total flux cleaned = 0.000952821 Jy ! Component: 200 - total flux cleaned = 0.000990621 Jy ! Total flux subtracted in 200 components = 0.000990621 Jy ! Clean residual min=-0.006943 max=0.007090 Jy/beam ! Clean residual mean=0.000015 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.4269 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 49 components and 0.4269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067966Jy sigma=0.972145 ! Fit after self-cal, rms=0.067963Jy sigma=0.972128 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6728 mas, bmaj=1.856 mas, bpa=-5.337 degrees ! Estimated noise=2.27404 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.261396 Jy ! Component: 100 - total flux cleaned = 0.350409 Jy ! Component: 150 - total flux cleaned = 0.388659 Jy ! Component: 200 - total flux cleaned = 0.40681 Jy ! Total flux subtracted in 200 components = 0.40681 Jy ! Clean residual min=-0.007859 max=0.009460 Jy/beam ! Clean residual mean=-0.000058 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.40681 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.40681 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8576 mas, bmaj=2.285 mas, bpa=-6.352 degrees ! Estimated noise=1.50045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131371 Jy ! Component: 100 - total flux cleaned = 0.0172278 Jy ! Component: 150 - total flux cleaned = 0.0186578 Jy ! Component: 200 - total flux cleaned = 0.0187893 Jy ! Total flux subtracted in 200 components = 0.0187893 Jy ! Clean residual min=-0.005764 max=0.006043 Jy/beam ! Clean residual mean=0.000001 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.425599 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.425599 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=7.126 mas, bpa=-1.266 degrees ! Estimated noise=1.91233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118476 Jy ! Component: 100 - total flux cleaned = 0.00120756 Jy ! Component: 150 - total flux cleaned = 0.00122737 Jy ! Component: 200 - total flux cleaned = 0.0012468 Jy ! Total flux subtracted in 200 components = 0.0012468 Jy ! Clean residual min=-0.006934 max=0.007077 Jy/beam ! Clean residual mean=0.000014 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 0.426846 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 47 components and 0.426846 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8576 mas, bmaj=2.285 mas, bpa=-6.352 degrees ! Estimated noise=1.50045 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000726112 Jy ! Component: 100 - total flux cleaned = -0.000790724 Jy ! Component: 150 - total flux cleaned = -0.000817965 Jy ! Component: 200 - total flux cleaned = -0.000817771 Jy ! Total flux subtracted in 200 components = -0.000817771 Jy ! Clean residual min=-0.005745 max=0.006031 Jy/beam ! Clean residual mean=0.000003 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 0.426028 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.426028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067980Jy sigma=0.972560 ! Fit after self-cal, rms=0.067979Jy sigma=0.972544 wmodel J0115-3049_X_2004_04_30_yyk\_map.mod ! Writing 55 model components to file: J0115-3049_X_2004_04_30_yyk_map.mod wobs J0115-3049_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0115-3049_X_2004_04_30_yyk_uvs.fits wwins J0115-3049_X_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0115-3049_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170113 Jy ! Component: 100 - total flux cleaned = 0.00269602 Jy ! Component: 150 - total flux cleaned = 0.00341559 Jy ! Component: 200 - total flux cleaned = 0.0036652 Jy ! Component: 250 - total flux cleaned = 0.00374634 Jy ! Component: 300 - total flux cleaned = 0.00337154 Jy ! Component: 350 - total flux cleaned = 0.00300966 Jy ! Component: 400 - total flux cleaned = 0.00273099 Jy ! Component: 450 - total flux cleaned = 0.0023288 Jy ! Component: 500 - total flux cleaned = 0.0020716 Jy ! Component: 550 - total flux cleaned = 0.00169953 Jy ! Component: 600 - total flux cleaned = 0.00134107 Jy ! Component: 650 - total flux cleaned = 0.00111077 Jy ! Component: 700 - total flux cleaned = 0.000886845 Jy ! Component: 750 - total flux cleaned = 0.000506081 Jy ! Component: 800 - total flux cleaned = 0.000347807 Jy ! Component: 850 - total flux cleaned = 0.000193716 Jy ! Component: 900 - total flux cleaned = -6.09185e-06 Jy ! Component: 950 - total flux cleaned = -0.000152088 Jy ! Component: 1000 - total flux cleaned = -0.000246003 Jy ! Component: 1050 - total flux cleaned = -0.000292502 Jy ! Component: 1100 - total flux cleaned = -0.000337915 Jy ! Component: 1150 - total flux cleaned = -0.000426545 Jy ! Component: 1200 - total flux cleaned = -0.000598405 Jy ! Component: 1250 - total flux cleaned = -0.000598313 Jy ! Component: 1300 - total flux cleaned = -0.00072292 Jy ! Component: 1350 - total flux cleaned = -0.000886139 Jy ! Component: 1400 - total flux cleaned = -0.00116483 Jy ! Component: 1450 - total flux cleaned = -0.00143678 Jy ! Component: 1500 - total flux cleaned = -0.00155116 Jy ! Component: 1550 - total flux cleaned = -0.00173952 Jy ! Component: 1600 - total flux cleaned = -0.0020343 Jy ! Component: 1650 - total flux cleaned = -0.0021791 Jy ! Component: 1700 - total flux cleaned = -0.00232189 Jy ! Component: 1750 - total flux cleaned = -0.00246177 Jy ! Component: 1800 - total flux cleaned = -0.00256515 Jy ! Component: 1850 - total flux cleaned = -0.002735 Jy ! Component: 1900 - total flux cleaned = -0.00290237 Jy ! Component: 1950 - total flux cleaned = -0.00316577 Jy ! Component: 2000 - total flux cleaned = -0.00336033 Jy ! Total flux subtracted in 2048 components = -0.00358496 Jy ! Clean residual min=-0.002165 max=0.001947 Jy/beam ! Clean residual mean=-0.000025 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.422443 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 182 components and 0.422443 Jy ![Exited script file: muppet] wmap "J0115-3049_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8576 x 2.285 at -6.352 degrees (North through East) ! Clean map min=-0.0034446 max=0.30858 Jy/beam ! Writing clean map to FITS file: J0115-3049_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.308582 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00059382 device "J0115-3049_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0115-3049_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.577306 0.577306 1.15461 2.30922 4.61845 9.23689 18.4738 36.9476 73.8951 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.308 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8576 x 2.285 at -6.352 degrees (North through East) ! Clean map min=-0.0034446 max=0.30858 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0115-3049_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0115-3049_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0115-3049_X_2004_04_30_yyk_uvs.log closed on Tue Dec 6 23:50:57 2005