! Started logfile: J0045-3705_X_2004_05_27_yyk_uvs.log on Tue Dec 6 23:48:55 2005 obs J0045-3705_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0045-3705_X_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672222 visibilities/baseline/integration-bin. ! Found source: J0045-3705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0045-3705_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.207901 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.816573Jy sigma=12.462358 ! Fit after self-cal, rms=0.816200Jy sigma=12.457852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6201 mas, bmaj=1.813 mas, bpa=-3.265 degrees ! Estimated noise=2.79631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.165758 Jy ! Component: 100 - total flux cleaned = 0.185206 Jy ! Total flux subtracted in 100 components = 0.185206 Jy ! Clean residual min=-0.009703 max=0.011268 Jy/beam ! Clean residual mean=-0.000036 rms=0.002790 Jy/beam ! Combined flux in latest and established models = 0.185206 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.185206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087642Jy sigma=1.081985 ! Fit after self-cal, rms=0.087657Jy sigma=1.081937 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7586 mas, bmaj=2.086 mas, bpa=-3.169 degrees ! Estimated noise=2.24984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066903 Jy ! Component: 100 - total flux cleaned = 0.00704506 Jy ! Component: 150 - total flux cleaned = 0.00736108 Jy ! Component: 200 - total flux cleaned = 0.00735993 Jy ! Total flux subtracted in 200 components = 0.00735993 Jy ! Clean residual min=-0.007695 max=0.008818 Jy/beam ! Clean residual mean=-0.000075 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.192566 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.192566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087616Jy sigma=1.074379 ! Fit after self-cal, rms=0.087584Jy sigma=1.074305 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00542 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.86 ! LA 0.95 MK 1.01 NL 1.13 OV 0.94 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.973421 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.00* KP 0.96 ! LA 0.95 MK 1.02 NL 1.06 OV 1.07 ! PT 1.02 SC 1.02 ! ! ! Fit before self-cal, rms=0.087584Jy sigma=1.074305 ! Fit after self-cal, rms=0.087233Jy sigma=1.059028 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087233Jy sigma=1.059028 ! Fit after self-cal, rms=0.087254Jy sigma=1.058989 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7637 mas, bmaj=2.095 mas, bpa=-3.114 degrees ! Estimated noise=2.24099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133524 Jy ! Component: 100 - total flux cleaned = -0.00142373 Jy ! Component: 150 - total flux cleaned = -0.00142655 Jy ! Component: 200 - total flux cleaned = -0.00142205 Jy ! Total flux subtracted in 200 components = -0.00142205 Jy ! Clean residual min=-0.006667 max=0.007721 Jy/beam ! Clean residual mean=-0.000045 rms=0.002073 Jy/beam ! Combined flux in latest and established models = 0.191144 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.191144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087217Jy sigma=1.058251 ! Fit after self-cal, rms=0.087189Jy sigma=1.058211 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087189Jy sigma=1.058211 ! Fit after self-cal, rms=0.084568Jy sigma=1.013790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000891072 Jy ! Component: 100 - total flux cleaned = 0.000889867 Jy ! Component: 150 - total flux cleaned = 0.00088953 Jy ! Component: 200 - total flux cleaned = 0.000927171 Jy ! Total flux subtracted in 200 components = 0.000927171 Jy ! Clean residual min=-0.006193 max=0.007517 Jy/beam ! Clean residual mean=-0.000045 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 0.192071 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 17 components and 0.192071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084575Jy sigma=1.013199 ! Fit after self-cal, rms=0.084513Jy sigma=1.009195 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7637 x 2.095 at -3.114 degrees (North through East) ! Clean map min=-0.005411 max=0.18426 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084513Jy sigma=1.009195 ! Fit after self-cal, rms=0.085260Jy sigma=1.006952 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085260Jy sigma=1.006952 ! Fit after self-cal, rms=0.085356Jy sigma=1.006474 ! Inverting map and beam ! Estimated beam: bmin=0.7662 mas, bmaj=2.101 mas, bpa=-3.014 degrees ! Estimated noise=2.25582 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083225 Jy ! Component: 100 - total flux cleaned = 0.0009276 Jy ! Component: 150 - total flux cleaned = 0.000929474 Jy ! Component: 200 - total flux cleaned = 0.000968835 Jy ! Total flux subtracted in 200 components = 0.000968835 Jy ! Clean residual min=-0.006216 max=0.007423 Jy/beam ! Clean residual mean=-0.000046 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.19304 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.19304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085353Jy sigma=1.005774 ! Fit after self-cal, rms=0.085411Jy sigma=1.005680 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085411Jy sigma=1.005680 ! Fit after self-cal, rms=0.085429Jy sigma=0.998227 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085429Jy sigma=0.998227 ! Fit after self-cal, rms=0.085428Jy sigma=0.998181 ! Inverting map and beam ! Estimated beam: bmin=0.7671 mas, bmaj=2.103 mas, bpa=-2.879 degrees ! Estimated noise=2.26608 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879746 Jy ! Component: 100 - total flux cleaned = 0.000883693 Jy ! Component: 150 - total flux cleaned = 0.000925013 Jy ! Component: 200 - total flux cleaned = 0.000924202 Jy ! Total flux subtracted in 200 components = 0.000924202 Jy ! Clean residual min=-0.006258 max=0.007363 Jy/beam ! Clean residual mean=-0.000047 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.193964 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.193964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085418Jy sigma=0.997564 ! Fit after self-cal, rms=0.085410Jy sigma=0.997545 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=9.221 mas, bpa=-1.442 degrees ! Estimated noise=3.07008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222881 Jy ! Component: 100 - total flux cleaned = 0.00223622 Jy ! Component: 150 - total flux cleaned = 0.00223832 Jy ! Component: 200 - total flux cleaned = 0.00229231 Jy ! Total flux subtracted in 200 components = 0.00229231 Jy ! Clean residual min=-0.006448 max=0.007649 Jy/beam ! Clean residual mean=-0.000090 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 0.196257 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 24 components and 0.196257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085590Jy sigma=0.998208 ! Fit after self-cal, rms=0.085507Jy sigma=0.997862 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6226 mas, bmaj=1.816 mas, bpa=-3.017 degrees ! Estimated noise=2.82827 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.168572 Jy ! Component: 100 - total flux cleaned = 0.188349 Jy ! Component: 150 - total flux cleaned = 0.188604 Jy ! Component: 200 - total flux cleaned = 0.188505 Jy ! Total flux subtracted in 200 components = 0.188505 Jy ! Clean residual min=-0.008050 max=0.009005 Jy/beam ! Clean residual mean=-0.000020 rms=0.002346 Jy/beam ! Combined flux in latest and established models = 0.188505 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.188505 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7671 mas, bmaj=2.103 mas, bpa=-2.879 degrees ! Estimated noise=2.26608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.6, -20.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00984749 Jy ! Component: 100 - total flux cleaned = 0.0113695 Jy ! Component: 150 - total flux cleaned = 0.0117352 Jy ! Component: 200 - total flux cleaned = 0.0117377 Jy ! Total flux subtracted in 200 components = 0.0117377 Jy ! Clean residual min=-0.005864 max=0.006133 Jy/beam ! Clean residual mean=-0.000011 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.200242 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.200242 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=9.221 mas, bpa=-1.442 degrees ! Estimated noise=3.07008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153272 Jy ! Component: 100 - total flux cleaned = 0.000233418 Jy ! Component: 150 - total flux cleaned = 0.000239543 Jy ! Component: 200 - total flux cleaned = 0.000238217 Jy ! Total flux subtracted in 200 components = 0.000238217 Jy ! Clean residual min=-0.006605 max=0.006343 Jy/beam ! Clean residual mean=-0.000043 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.20048 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.20048 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7671 mas, bmaj=2.103 mas, bpa=-2.879 degrees ! Estimated noise=2.26608 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.32091e-05 Jy ! Component: 100 - total flux cleaned = -0.000296646 Jy ! Component: 150 - total flux cleaned = -0.0006139 Jy ! Component: 200 - total flux cleaned = -0.000759347 Jy ! Total flux subtracted in 200 components = -0.000759347 Jy ! Clean residual min=-0.005646 max=0.005514 Jy/beam ! Clean residual mean=-0.000020 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.199721 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.199721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084360Jy sigma=0.982317 ! Fit after self-cal, rms=0.084369Jy sigma=0.981235 wmodel J0045-3705_X_2004_05_27_yyk\_map.mod ! Writing 37 model components to file: J0045-3705_X_2004_05_27_yyk_map.mod wobs J0045-3705_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0045-3705_X_2004_05_27_yyk_uvs.fits wwins J0045-3705_X_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J0045-3705_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177924 Jy ! Component: 100 - total flux cleaned = -0.00165696 Jy ! Component: 150 - total flux cleaned = -0.00261363 Jy ! Component: 200 - total flux cleaned = -0.00302645 Jy ! Component: 250 - total flux cleaned = -0.00326352 Jy ! Component: 300 - total flux cleaned = -0.00356395 Jy ! Component: 350 - total flux cleaned = -0.00392026 Jy ! Component: 400 - total flux cleaned = -0.0043277 Jy ! Component: 450 - total flux cleaned = -0.00452187 Jy ! Component: 500 - total flux cleaned = -0.00458253 Jy ! Component: 550 - total flux cleaned = -0.00446042 Jy ! Component: 600 - total flux cleaned = -0.00463639 Jy ! Component: 650 - total flux cleaned = -0.00463603 Jy ! Component: 700 - total flux cleaned = -0.00452757 Jy ! Component: 750 - total flux cleaned = -0.00458314 Jy ! Component: 800 - total flux cleaned = -0.00447961 Jy ! Component: 850 - total flux cleaned = -0.00442923 Jy ! Component: 900 - total flux cleaned = -0.00437937 Jy ! Component: 950 - total flux cleaned = -0.00418193 Jy ! Component: 1000 - total flux cleaned = -0.00427999 Jy ! Component: 1050 - total flux cleaned = -0.00418432 Jy ! Component: 1100 - total flux cleaned = -0.00413751 Jy ! Component: 1150 - total flux cleaned = -0.00404491 Jy ! Component: 1200 - total flux cleaned = -0.00390806 Jy ! Component: 1250 - total flux cleaned = -0.00386279 Jy ! Component: 1300 - total flux cleaned = -0.00373004 Jy ! Component: 1350 - total flux cleaned = -0.00359938 Jy ! Component: 1400 - total flux cleaned = -0.00351358 Jy ! Component: 1450 - total flux cleaned = -0.00338651 Jy ! Component: 1500 - total flux cleaned = -0.00334411 Jy ! Component: 1550 - total flux cleaned = -0.00322071 Jy ! Component: 1600 - total flux cleaned = -0.00313952 Jy ! Component: 1650 - total flux cleaned = -0.00301925 Jy ! Component: 1700 - total flux cleaned = -0.00298022 Jy ! Component: 1750 - total flux cleaned = -0.00294089 Jy ! Component: 1800 - total flux cleaned = -0.00278712 Jy ! Component: 1850 - total flux cleaned = -0.00267416 Jy ! Component: 1900 - total flux cleaned = -0.00267478 Jy ! Component: 1950 - total flux cleaned = -0.00271164 Jy ! Component: 2000 - total flux cleaned = -0.00267433 Jy ! Total flux subtracted in 2048 components = -0.00260115 Jy ! Clean residual min=-0.001893 max=0.002019 Jy/beam ! Clean residual mean=0.000003 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.19712 Jy keep ! Adding 114 model components to the UV plane model. ! The established model now contains 151 components and 0.19712 Jy ![Exited script file: muppet] wmap "J0045-3705_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7671 x 2.103 at -2.879 degrees (North through East) ! Clean map min=-0.0044086 max=0.18975 Jy/beam ! Writing clean map to FITS file: J0045-3705_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.189752 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00067017 device "J0045-3705_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0045-3705_X_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05955 1.05955 2.11909 4.23819 8.47638 16.9528 33.9055 67.811 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.189 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7671 x 2.103 at -2.879 degrees (North through East) ! Clean map min=-0.0044086 max=0.18975 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0045-3705_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0045-3705_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0045-3705_X_2004_05_27_yyk_uvs.log closed on Tue Dec 6 23:48:59 2005