! Started logfile: J0031-1426_X_2004_05_08_yyk_uvs.log on Tue Dec 6 23:48:42 2005 obs J0031-1426_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0031-1426_X_2004_05_08_yyk_uve.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.92381 visibilities/baseline/integration-bin. ! Found source: J0031-1426 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 1164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0031-1426_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.121232 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905445Jy sigma=17.396437 ! Fit after self-cal, rms=0.905379Jy sigma=17.394022 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.706 mas, bmaj=1.906 mas, bpa=-2.331 degrees ! Estimated noise=1.56116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785927 Jy ! Component: 100 - total flux cleaned = 0.104792 Jy ! Total flux subtracted in 100 components = 0.104792 Jy ! Clean residual min=-0.011224 max=0.017731 Jy/beam ! Clean residual mean=-0.000008 rms=0.002931 Jy/beam ! Combined flux in latest and established models = 0.104792 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.104792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065716Jy sigma=1.189531 ! Fit after self-cal, rms=0.065674Jy sigma=1.187585 ! Inverting map ! Added new window around map position (1.6, -1.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204522 Jy ! Component: 100 - total flux cleaned = 0.0314976 Jy ! Total flux subtracted in 100 components = 0.0314976 Jy ! Clean residual min=-0.008372 max=0.008135 Jy/beam ! Clean residual mean=0.000003 rms=0.001989 Jy/beam ! Combined flux in latest and established models = 0.136289 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.136289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059924Jy sigma=1.056463 ! Fit after self-cal, rms=0.059772Jy sigma=1.053630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9006 mas, bmaj=2.578 mas, bpa=-6.259 degrees ! Estimated noise=1.12731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103935 Jy ! Component: 100 - total flux cleaned = 0.0155302 Jy ! Component: 150 - total flux cleaned = 0.0171704 Jy ! Component: 200 - total flux cleaned = 0.0176508 Jy ! Total flux subtracted in 200 components = 0.0176508 Jy ! Clean residual min=-0.005373 max=0.010134 Jy/beam ! Clean residual mean=0.000017 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.15394 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.15394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058517Jy sigma=1.026200 ! Fit after self-cal, rms=0.058495Jy sigma=1.025639 ! Inverting map ! Added new window around map position (-3.4, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975408 Jy ! Component: 100 - total flux cleaned = 0.0130543 Jy ! Component: 150 - total flux cleaned = 0.0142701 Jy ! Component: 200 - total flux cleaned = 0.0148106 Jy ! Total flux subtracted in 200 components = 0.0148106 Jy ! Clean residual min=-0.004228 max=0.004412 Jy/beam ! Clean residual mean=0.000024 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.168751 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 67 components and 0.168751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057496Jy sigma=1.000335 ! Fit after self-cal, rms=0.057468Jy sigma=0.999893 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02094 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 0.92 KP 0.96 ! LA 1.03 MK 0.94 NL 1.06 OV 0.92 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02738 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.93 HN 1.03 KP 0.93 ! LA 0.96 MK 1.05 NL 0.99 OV 0.90 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992839 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.02 KP 0.91 ! LA 0.93 MK 1.00 NL 0.94 OV 1.13 ! PT 1.16 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.057468Jy sigma=0.999893 ! Fit after self-cal, rms=0.056578Jy sigma=0.987206 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056578Jy sigma=0.987206 ! Fit after self-cal, rms=0.056581Jy sigma=0.987183 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9015 mas, bmaj=2.567 mas, bpa=-5.914 degrees ! Estimated noise=1.12238 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014627 Jy ! Component: 100 - total flux cleaned = 0.00230531 Jy ! Component: 150 - total flux cleaned = 0.00272506 Jy ! Component: 200 - total flux cleaned = 0.0030454 Jy ! Total flux subtracted in 200 components = 0.0030454 Jy ! Clean residual min=-0.003703 max=0.004137 Jy/beam ! Clean residual mean=0.000014 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.171796 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 88 components and 0.171796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056475Jy sigma=0.984833 ! Fit after self-cal, rms=0.056469Jy sigma=0.984784 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056469Jy sigma=0.984784 ! Fit after self-cal, rms=0.054280Jy sigma=0.945019 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808283 Jy ! Component: 100 - total flux cleaned = 0.00109202 Jy ! Component: 150 - total flux cleaned = 0.00119589 Jy ! Component: 200 - total flux cleaned = 0.001289 Jy ! Total flux subtracted in 200 components = 0.001289 Jy ! Clean residual min=-0.003827 max=0.004156 Jy/beam ! Clean residual mean=0.000015 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.173085 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 103 components and 0.173085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054190Jy sigma=0.943353 ! Fit after self-cal, rms=0.054072Jy sigma=0.941072 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9015 x 2.567 at -5.914 degrees (North through East) ! Clean map min=-0.0036668 max=0.094196 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=4.903 mas, bpa=4.419 degrees ! Estimated noise=1.38461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045248 Jy ! Component: 100 - total flux cleaned = -0.000491496 Jy ! Component: 150 - total flux cleaned = -0.000526286 Jy ! Component: 200 - total flux cleaned = -0.000559531 Jy ! Total flux subtracted in 200 components = -0.000559531 Jy ! Clean residual min=-0.003574 max=0.003736 Jy/beam ! Clean residual mean=0.000025 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.172526 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.172526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054063Jy sigma=0.940748 ! Fit after self-cal, rms=0.054053Jy sigma=0.940466 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7052 mas, bmaj=1.908 mas, bpa=-2.097 degrees ! Estimated noise=1.55552 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0795224 Jy ! Component: 100 - total flux cleaned = 0.10912 Jy ! Component: 150 - total flux cleaned = 0.126903 Jy ! Component: 200 - total flux cleaned = 0.138981 Jy ! Total flux subtracted in 200 components = 0.138981 Jy ! Clean residual min=-0.008241 max=0.006461 Jy/beam ! Clean residual mean=-0.000002 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.138981 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.138981 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9015 mas, bmaj=2.567 mas, bpa=-5.914 degrees ! Estimated noise=1.12238 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.012346 Jy ! Component: 100 - total flux cleaned = 0.0199967 Jy ! Component: 150 - total flux cleaned = 0.0252563 Jy ! Component: 200 - total flux cleaned = 0.0289829 Jy ! Total flux subtracted in 200 components = 0.0289829 Jy ! Clean residual min=-0.004078 max=0.004388 Jy/beam ! Clean residual mean=0.000010 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.167964 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 54 components and 0.167964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=4.903 mas, bpa=4.419 degrees ! Estimated noise=1.38461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212834 Jy ! Component: 100 - total flux cleaned = 0.00290199 Jy ! Component: 150 - total flux cleaned = 0.00343119 Jy ! Component: 200 - total flux cleaned = 0.00347991 Jy ! Total flux subtracted in 200 components = 0.00347991 Jy ! Clean residual min=-0.003705 max=0.003550 Jy/beam ! Clean residual mean=0.000022 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.171444 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.171444 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9015 mas, bmaj=2.567 mas, bpa=-5.914 degrees ! Estimated noise=1.12238 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000979928 Jy ! Component: 100 - total flux cleaned = -0.000972031 Jy ! Component: 150 - total flux cleaned = -0.000896337 Jy ! Component: 200 - total flux cleaned = -0.000699355 Jy ! Total flux subtracted in 200 components = -0.000699355 Jy ! Clean residual min=-0.003789 max=0.004027 Jy/beam ! Clean residual mean=0.000012 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.170745 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.170745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054133Jy sigma=0.941652 ! Fit after self-cal, rms=0.054103Jy sigma=0.941098 wmodel J0031-1426_X_2004_05_08_yyk\_map.mod ! Writing 86 model components to file: J0031-1426_X_2004_05_08_yyk_map.mod wobs J0031-1426_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0031-1426_X_2004_05_08_yyk_uvs.fits wwins J0031-1426_X_2004_05_08_yyk\_map.win ! wwins: Wrote 3 windows to J0031-1426_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.84707e-05 Jy ! Component: 100 - total flux cleaned = -0.000522989 Jy ! Component: 150 - total flux cleaned = -0.000813424 Jy ! Component: 200 - total flux cleaned = -0.00102768 Jy ! Component: 250 - total flux cleaned = -0.00123037 Jy ! Component: 300 - total flux cleaned = -0.00132693 Jy ! Component: 350 - total flux cleaned = -0.00146396 Jy ! Component: 400 - total flux cleaned = -0.00146426 Jy ! Component: 450 - total flux cleaned = -0.00112632 Jy ! Component: 500 - total flux cleaned = -0.000962853 Jy ! Component: 550 - total flux cleaned = -0.000646038 Jy ! Component: 600 - total flux cleaned = -0.000492697 Jy ! Component: 650 - total flux cleaned = -0.00034287 Jy ! Component: 700 - total flux cleaned = -0.000124613 Jy ! Component: 750 - total flux cleaned = 5.31718e-05 Jy ! Component: 800 - total flux cleaned = 0.000191498 Jy ! Component: 850 - total flux cleaned = 0.000259003 Jy ! Component: 900 - total flux cleaned = 0.000293308 Jy ! Component: 950 - total flux cleaned = 0.000521027 Jy ! Component: 1000 - total flux cleaned = 0.000616547 Jy ! Component: 1050 - total flux cleaned = 0.00077303 Jy ! Component: 1100 - total flux cleaned = 0.000773623 Jy ! Component: 1150 - total flux cleaned = 0.000864645 Jy ! Component: 1200 - total flux cleaned = 0.000983586 Jy ! Component: 1250 - total flux cleaned = 0.00112864 Jy ! Component: 1300 - total flux cleaned = 0.00110058 Jy ! Component: 1350 - total flux cleaned = 0.00115689 Jy ! Component: 1400 - total flux cleaned = 0.0011568 Jy ! Component: 1450 - total flux cleaned = 0.00112974 Jy ! Component: 1500 - total flux cleaned = 0.00112961 Jy ! Component: 1550 - total flux cleaned = 0.00112894 Jy ! Component: 1600 - total flux cleaned = 0.000972223 Jy ! Component: 1650 - total flux cleaned = 0.000972279 Jy ! Component: 1700 - total flux cleaned = 0.000971974 Jy ! Component: 1750 - total flux cleaned = 0.000871576 Jy ! Component: 1800 - total flux cleaned = 0.000748077 Jy ! Component: 1850 - total flux cleaned = 0.000699243 Jy ! Component: 1900 - total flux cleaned = 0.000650737 Jy ! Component: 1950 - total flux cleaned = 0.000602887 Jy ! Component: 2000 - total flux cleaned = 0.000508704 Jy ! Total flux subtracted in 2048 components = 0.000485734 Jy ! Clean residual min=-0.001215 max=0.001661 Jy/beam ! Clean residual mean=0.000004 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.171231 Jy keep ! Adding 107 model components to the UV plane model. ! The established model now contains 193 components and 0.171231 Jy ![Exited script file: muppet] wmap "J0031-1426_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9015 x 2.567 at -5.914 degrees (North through East) ! Clean map min=-0.0029096 max=0.096344 Jy/beam ! Writing clean map to FITS file: J0031-1426_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0963435 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000420069 device "J0031-1426_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0031-1426_X_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30803 1.30803 2.61607 5.23214 10.4643 20.9286 41.8571 83.7142 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9015 x 2.567 at -5.914 degrees (North through East) ! Clean map min=-0.0029096 max=0.096344 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0031-1426_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0031-1426_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0031-1426_X_2004_05_08_yyk_uvs.log closed on Tue Dec 6 23:48:46 2005