! Started logfile: J0030-0211_S_2004_05_08_yyk_uvs.log on Tue Dec 6 23:48:17 2005 obs J0030-0211_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0030-0211_S_2004_05_08_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893333 visibilities/baseline/integration-bin. ! Found source: J0030-0211 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0030-0211_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.156318 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.858974Jy sigma=15.479987 ! Fit after self-cal, rms=0.858917Jy sigma=15.478126 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.71 mas, bmaj=6.712 mas, bpa=-0.6773 degrees ! Estimated noise=1.7545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.122788 Jy ! Component: 100 - total flux cleaned = 0.141495 Jy ! Total flux subtracted in 100 components = 0.141495 Jy ! Clean residual min=-0.006499 max=0.008261 Jy/beam ! Clean residual mean=0.000016 rms=0.002024 Jy/beam ! Combined flux in latest and established models = 0.141495 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.141495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062154Jy sigma=1.006115 ! Fit after self-cal, rms=0.062148Jy sigma=1.005908 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=7.941 mas, bpa=-2.535 degrees ! Estimated noise=1.46877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628681 Jy ! Component: 100 - total flux cleaned = 0.00909892 Jy ! Component: 150 - total flux cleaned = 0.0101418 Jy ! Component: 200 - total flux cleaned = 0.0102619 Jy ! Total flux subtracted in 200 components = 0.0102619 Jy ! Clean residual min=-0.006020 max=0.007293 Jy/beam ! Clean residual mean=0.000007 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.151757 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.151757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061641Jy sigma=0.997509 ! Fit after self-cal, rms=0.061636Jy sigma=0.997194 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999433 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.91 KP 0.96 ! LA 1.11 MK 1.00 NL 1.08 OV 1.03 ! PT 0.98 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.974988 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.08 KP 0.94 ! LA 1.06 MK 1.12 NL 1.06 OV 1.01 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01442 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.87 HN 1.00 KP 0.93 ! LA 0.98 MK 0.92 NL 1.09 OV 1.00* ! PT 1.00 SC 0.93 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03167 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.06 KP 0.94 ! LA 1.00* MK 0.93 NL 0.98 OV 0.84 ! PT 0.90 SC 1.11 ! ! ! Fit before self-cal, rms=0.061636Jy sigma=0.997194 ! Fit after self-cal, rms=0.059451Jy sigma=0.965594 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059451Jy sigma=0.965594 ! Fit after self-cal, rms=0.059460Jy sigma=0.965545 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=7.993 mas, bpa=-2.005 degrees ! Estimated noise=1.46355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170943 Jy ! Component: 100 - total flux cleaned = 0.000173213 Jy ! Component: 150 - total flux cleaned = 0.000172344 Jy ! Component: 200 - total flux cleaned = 0.000168753 Jy ! Total flux subtracted in 200 components = 0.000168753 Jy ! Clean residual min=-0.004575 max=0.004681 Jy/beam ! Clean residual mean=0.000049 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.151925 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.151925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059390Jy sigma=0.964470 ! Fit after self-cal, rms=0.059392Jy sigma=0.964323 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059392Jy sigma=0.964323 ! Fit after self-cal, rms=0.057445Jy sigma=0.928143 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529882 Jy ! Component: 100 - total flux cleaned = 0.000492078 Jy ! Component: 150 - total flux cleaned = 0.000461013 Jy ! Component: 200 - total flux cleaned = 0.000459748 Jy ! Total flux subtracted in 200 components = 0.000459748 Jy ! Clean residual min=-0.004494 max=0.004525 Jy/beam ! Clean residual mean=0.000049 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.152385 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.152385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057394Jy sigma=0.927468 ! Fit after self-cal, rms=0.057307Jy sigma=0.924894 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.164 x 7.993 at -2.005 degrees (North through East) ! Clean map min=-0.0043083 max=0.14072 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057307Jy sigma=0.924894 ! Fit after self-cal, rms=0.056461Jy sigma=0.918713 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056461Jy sigma=0.918713 ! Fit after self-cal, rms=0.056468Jy sigma=0.918500 ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=7.934 mas, bpa=-1.758 degrees ! Estimated noise=1.45805 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564297 Jy ! Component: 100 - total flux cleaned = 0.000563067 Jy ! Component: 150 - total flux cleaned = 0.000563065 Jy ! Component: 200 - total flux cleaned = 0.000563453 Jy ! Total flux subtracted in 200 components = 0.000563453 Jy ! Clean residual min=-0.004626 max=0.004436 Jy/beam ! Clean residual mean=0.000046 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.152949 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.152948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056443Jy sigma=0.918006 ! Fit after self-cal, rms=0.056455Jy sigma=0.917936 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056455Jy sigma=0.917936 ! Fit after self-cal, rms=0.056005Jy sigma=0.907840 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056005Jy sigma=0.907840 ! Fit after self-cal, rms=0.056010Jy sigma=0.907813 ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.919 mas, bpa=-1.703 degrees ! Estimated noise=1.45777 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005075 Jy ! Component: 100 - total flux cleaned = 0.000555849 Jy ! Component: 150 - total flux cleaned = 0.000619829 Jy ! Component: 200 - total flux cleaned = 0.000659203 Jy ! Total flux subtracted in 200 components = 0.000659203 Jy ! Clean residual min=-0.004756 max=0.004462 Jy/beam ! Clean residual mean=0.000047 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.153608 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.153608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055996Jy sigma=0.907504 ! Fit after self-cal, rms=0.056004Jy sigma=0.907476 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.493 mas, bmaj=12.76 mas, bpa=4.044 degrees ! Estimated noise=1.85269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143312 Jy ! Component: 100 - total flux cleaned = 0.00146881 Jy ! Component: 150 - total flux cleaned = 0.00147006 Jy ! Component: 200 - total flux cleaned = 0.00147016 Jy ! Total flux subtracted in 200 components = 0.00147016 Jy ! Clean residual min=-0.005468 max=0.005308 Jy/beam ! Clean residual mean=0.000090 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.155078 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.155078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056005Jy sigma=0.907677 ! Fit after self-cal, rms=0.056007Jy sigma=0.907361 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=6.735 mas, bpa=-0.1529 degrees ! Estimated noise=1.71599 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.120687 Jy ! Component: 100 - total flux cleaned = 0.140533 Jy ! Component: 150 - total flux cleaned = 0.148051 Jy ! Component: 200 - total flux cleaned = 0.149691 Jy ! Total flux subtracted in 200 components = 0.149691 Jy ! Clean residual min=-0.005707 max=0.005544 Jy/beam ! Clean residual mean=0.000035 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.149691 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.149691 Jy ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.919 mas, bpa=-1.703 degrees ! Estimated noise=1.45777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336243 Jy ! Component: 100 - total flux cleaned = 0.00363859 Jy ! Component: 150 - total flux cleaned = 0.00369489 Jy ! Component: 200 - total flux cleaned = 0.00374034 Jy ! Total flux subtracted in 200 components = 0.00374034 Jy ! Clean residual min=-0.004811 max=0.004630 Jy/beam ! Clean residual mean=0.000047 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.153432 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.153432 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.493 mas, bmaj=12.76 mas, bpa=4.044 degrees ! Estimated noise=1.85269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158345 Jy ! Component: 100 - total flux cleaned = 0.00163515 Jy ! Component: 150 - total flux cleaned = 0.00163371 Jy ! Component: 200 - total flux cleaned = 0.00163383 Jy ! Total flux subtracted in 200 components = 0.00163383 Jy ! Clean residual min=-0.005495 max=0.005388 Jy/beam ! Clean residual mean=0.000091 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.155065 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.155065 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.919 mas, bpa=-1.703 degrees ! Estimated noise=1.45777 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000671564 Jy ! Component: 100 - total flux cleaned = -0.000919097 Jy ! Component: 150 - total flux cleaned = -0.00102597 Jy ! Component: 200 - total flux cleaned = -0.00109683 Jy ! Total flux subtracted in 200 components = -0.00109683 Jy ! Clean residual min=-0.004778 max=0.004579 Jy/beam ! Clean residual mean=0.000046 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.153969 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.153969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056013Jy sigma=0.907545 ! Fit after self-cal, rms=0.056014Jy sigma=0.907487 wmodel J0030-0211_S_2004_05_08_yyk\_map.mod ! Writing 55 model components to file: J0030-0211_S_2004_05_08_yyk_map.mod wobs J0030-0211_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0030-0211_S_2004_05_08_yyk_uvs.fits wwins J0030-0211_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J0030-0211_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134752 Jy ! Component: 100 - total flux cleaned = 6.01399e-05 Jy ! Component: 150 - total flux cleaned = -8.23119e-05 Jy ! Component: 200 - total flux cleaned = -0.000150036 Jy ! Component: 250 - total flux cleaned = -0.000472427 Jy ! Component: 300 - total flux cleaned = -0.000593888 Jy ! Component: 350 - total flux cleaned = -0.000593847 Jy ! Component: 400 - total flux cleaned = -0.000651113 Jy ! Component: 450 - total flux cleaned = -0.000652224 Jy ! Component: 500 - total flux cleaned = -0.000652646 Jy ! Component: 550 - total flux cleaned = -0.000548604 Jy ! Component: 600 - total flux cleaned = -0.000296706 Jy ! Component: 650 - total flux cleaned = -4.05243e-06 Jy ! Component: 700 - total flux cleaned = 0.000328102 Jy ! Component: 750 - total flux cleaned = 0.000745835 Jy ! Component: 800 - total flux cleaned = 0.00120047 Jy ! Component: 850 - total flux cleaned = 0.00160134 Jy ! Component: 900 - total flux cleaned = 0.00203714 Jy ! Component: 950 - total flux cleaned = 0.00233592 Jy ! Component: 1000 - total flux cleaned = 0.00267083 Jy ! Component: 1050 - total flux cleaned = 0.00287725 Jy ! Component: 1100 - total flux cleaned = 0.00324078 Jy ! Component: 1150 - total flux cleaned = 0.00347899 Jy ! Component: 1200 - total flux cleaned = 0.00379009 Jy ! Component: 1250 - total flux cleaned = 0.00401919 Jy ! Component: 1300 - total flux cleaned = 0.00435661 Jy ! Component: 1350 - total flux cleaned = 0.00461456 Jy ! Component: 1400 - total flux cleaned = 0.00475931 Jy ! Component: 1450 - total flux cleaned = 0.00490241 Jy ! Component: 1500 - total flux cleaned = 0.00507728 Jy ! Component: 1550 - total flux cleaned = 0.00528511 Jy ! Component: 1600 - total flux cleaned = 0.00542218 Jy ! Component: 1650 - total flux cleaned = 0.00575961 Jy ! Component: 1700 - total flux cleaned = 0.0058593 Jy ! Component: 1750 - total flux cleaned = 0.00612315 Jy ! Component: 1800 - total flux cleaned = 0.00635127 Jy ! Component: 1850 - total flux cleaned = 0.00660869 Jy ! Component: 1900 - total flux cleaned = 0.00670441 Jy ! Component: 1950 - total flux cleaned = 0.0069561 Jy ! Component: 2000 - total flux cleaned = 0.00714265 Jy ! Total flux subtracted in 2048 components = 0.00732674 Jy ! Clean residual min=-0.001787 max=0.002093 Jy/beam ! Clean residual mean=0.000012 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.161295 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 173 components and 0.161295 Jy ![Exited script file: muppet] wmap "J0030-0211_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 7.919 at -1.703 degrees (North through East) ! Clean map min=-0.0046765 max=0.14005 Jy/beam ! Writing clean map to FITS file: J0030-0211_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140047 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000603863 device "J0030-0211_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0030-0211_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.29356 1.29356 2.58711 5.17422 10.3484 20.6969 41.3938 82.7876 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 7.919 at -1.703 degrees (North through East) ! Clean map min=-0.0046765 max=0.14005 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0030-0211_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0030-0211_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0030-0211_S_2004_05_08_yyk_uvs.log closed on Tue Dec 6 23:48:21 2005