! Started logfile: J0003-1149_S_2004_05_08_yyk_uvs.log on Tue Dec 6 23:47:01 2005 obs J0003-1149_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0003-1149_S_2004_05_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.675556 visibilities/baseline/integration-bin. ! Found source: J0003-1149 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 1216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0003-1149_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.670862 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.466319Jy sigma=7.505606 ! Fit after self-cal, rms=0.464063Jy sigma=7.470148 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=12.64 mas, bpa=-14.8 degrees ! Estimated noise=2.40187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.553954 Jy ! Component: 100 - total flux cleaned = 0.696179 Jy ! Total flux subtracted in 100 components = 0.696179 Jy ! Clean residual min=-0.021561 max=0.034959 Jy/beam ! Clean residual mean=0.000289 rms=0.008620 Jy/beam ! Combined flux in latest and established models = 0.696179 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.696179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114497Jy sigma=1.857467 ! Fit after self-cal, rms=0.114400Jy sigma=1.853911 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.093 mas, bmaj=14.41 mas, bpa=-11.37 degrees ! Estimated noise=1.38693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472846 Jy ! Component: 100 - total flux cleaned = 0.0638787 Jy ! Component: 150 - total flux cleaned = 0.0646507 Jy ! Component: 200 - total flux cleaned = 0.0652569 Jy ! Total flux subtracted in 200 components = 0.0652569 Jy ! Clean residual min=-0.012889 max=0.018120 Jy/beam ! Clean residual mean=-0.000329 rms=0.004615 Jy/beam ! Combined flux in latest and established models = 0.761436 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 64 components and 0.761436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098954Jy sigma=1.585724 ! Fit after self-cal, rms=0.098918Jy sigma=1.584255 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.9972 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.00* KP 0.97 ! LA 1.08 MK 0.95 NL 0.96 OV 0.99 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.098918Jy sigma=1.584255 ! Fit after self-cal, rms=0.096601Jy sigma=1.530491 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096601Jy sigma=1.530491 ! Fit after self-cal, rms=0.096479Jy sigma=1.528360 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.012 mas, bmaj=14.47 mas, bpa=-11.71 degrees ! Estimated noise=1.39587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00983437 Jy ! Component: 100 - total flux cleaned = 0.010518 Jy ! Component: 150 - total flux cleaned = 0.0107248 Jy ! Component: 200 - total flux cleaned = 0.0110332 Jy ! Total flux subtracted in 200 components = 0.0110332 Jy ! Clean residual min=-0.011331 max=0.012918 Jy/beam ! Clean residual mean=-0.000006 rms=0.003939 Jy/beam ! Combined flux in latest and established models = 0.772469 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.772469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094645Jy sigma=1.506693 ! Fit after self-cal, rms=0.094587Jy sigma=1.505529 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094587Jy sigma=1.505529 ! Fit after self-cal, rms=0.081628Jy sigma=1.316308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700736 Jy ! Component: 100 - total flux cleaned = 0.000357078 Jy ! Component: 150 - total flux cleaned = 7.26754e-05 Jy ! Component: 200 - total flux cleaned = 5.8848e-05 Jy ! Total flux subtracted in 200 components = 5.8848e-05 Jy ! Clean residual min=-0.010783 max=0.012332 Jy/beam ! Clean residual mean=-0.000003 rms=0.003926 Jy/beam ! Combined flux in latest and established models = 0.772528 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 84 components and 0.772528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078847Jy sigma=1.284333 ! Fit after self-cal, rms=0.078346Jy sigma=1.276817 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.012 x 14.47 at -11.71 degrees (North through East) ! Clean map min=-0.010783 max=0.62592 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078346Jy sigma=1.276817 ! Fit after self-cal, rms=0.071822Jy sigma=1.137628 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071822Jy sigma=1.137628 ! Fit after self-cal, rms=0.071785Jy sigma=1.136545 ! Inverting map and beam ! Estimated beam: bmin=4.656 mas, bmaj=14.61 mas, bpa=-12.74 degrees ! Estimated noise=1.39477 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814276 Jy ! Component: 100 - total flux cleaned = 0.00741873 Jy ! Component: 150 - total flux cleaned = 0.00661123 Jy ! Component: 200 - total flux cleaned = 0.00632058 Jy ! Total flux subtracted in 200 components = 0.00632058 Jy ! Clean residual min=-0.008222 max=0.010732 Jy/beam ! Clean residual mean=0.000124 rms=0.002884 Jy/beam ! Combined flux in latest and established models = 0.778849 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.778849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070135Jy sigma=1.117167 ! Fit after self-cal, rms=0.070134Jy sigma=1.117032 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070134Jy sigma=1.117032 ! Fit after self-cal, rms=0.062111Jy sigma=0.978566 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062111Jy sigma=0.978566 ! Fit after self-cal, rms=0.062109Jy sigma=0.978537 ! Inverting map and beam ! Estimated beam: bmin=4.752 mas, bmaj=14.5 mas, bpa=-12.48 degrees ! Estimated noise=1.40367 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376294 Jy ! Component: 100 - total flux cleaned = 0.00405676 Jy ! Component: 150 - total flux cleaned = 0.00399866 Jy ! Component: 200 - total flux cleaned = 0.00399929 Jy ! Total flux subtracted in 200 components = 0.00399929 Jy ! Clean residual min=-0.006574 max=0.010783 Jy/beam ! Clean residual mean=0.000204 rms=0.002587 Jy/beam ! Combined flux in latest and established models = 0.782848 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 101 components and 0.782848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061918Jy sigma=0.974810 ! Fit after self-cal, rms=0.061889Jy sigma=0.974717 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.36 mas, bmaj=19.69 mas, bpa=14.63 degrees ! Estimated noise=1.53353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125031 Jy ! Component: 100 - total flux cleaned = 0.00137553 Jy ! Component: 150 - total flux cleaned = 0.00152825 Jy ! Component: 200 - total flux cleaned = 0.00166133 Jy ! Total flux subtracted in 200 components = 0.00166133 Jy ! Clean residual min=-0.006910 max=0.011205 Jy/beam ! Clean residual mean=0.000255 rms=0.002894 Jy/beam ! Combined flux in latest and established models = 0.784509 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 0.784509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061963Jy sigma=0.974425 ! Fit after self-cal, rms=0.061876Jy sigma=0.973903 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=12.72 mas, bpa=-15.09 degrees ! Estimated noise=2.36624 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.55824 Jy ! Component: 100 - total flux cleaned = 0.704521 Jy ! Component: 150 - total flux cleaned = 0.749129 Jy ! Component: 200 - total flux cleaned = 0.767576 Jy ! Total flux subtracted in 200 components = 0.767576 Jy ! Clean residual min=-0.011075 max=0.013784 Jy/beam ! Clean residual mean=0.000257 rms=0.003573 Jy/beam ! Combined flux in latest and established models = 0.767576 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.767576 Jy ! Inverting map and beam ! Estimated beam: bmin=4.752 mas, bmaj=14.5 mas, bpa=-12.48 degrees ! Estimated noise=1.40367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120271 Jy ! Component: 100 - total flux cleaned = 0.012319 Jy ! Component: 150 - total flux cleaned = 0.0125638 Jy ! Component: 200 - total flux cleaned = 0.0129399 Jy ! Total flux subtracted in 200 components = 0.0129399 Jy ! Clean residual min=-0.007088 max=0.011394 Jy/beam ! Clean residual mean=0.000229 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 0.780516 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.780516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.36 mas, bmaj=19.69 mas, bpa=14.63 degrees ! Estimated noise=1.53353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316539 Jy ! Component: 100 - total flux cleaned = 0.00377263 Jy ! Component: 150 - total flux cleaned = 0.00412688 Jy ! Component: 200 - total flux cleaned = 0.00417575 Jy ! Total flux subtracted in 200 components = 0.00417575 Jy ! Clean residual min=-0.006847 max=0.011204 Jy/beam ! Clean residual mean=0.000253 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 0.784692 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.784692 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.752 mas, bmaj=14.5 mas, bpa=-12.48 degrees ! Estimated noise=1.40367 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000986734 Jy ! Component: 100 - total flux cleaned = -0.00100752 Jy ! Component: 150 - total flux cleaned = -0.0011133 Jy ! Component: 200 - total flux cleaned = -0.00111172 Jy ! Total flux subtracted in 200 components = -0.00111172 Jy ! Clean residual min=-0.006791 max=0.010870 Jy/beam ! Clean residual mean=0.000193 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 0.78358 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.78358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062581Jy sigma=0.981003 ! Fit after self-cal, rms=0.062494Jy sigma=0.980586 wmodel J0003-1149_S_2004_05_08_yyk\_map.mod ! Writing 94 model components to file: J0003-1149_S_2004_05_08_yyk_map.mod wobs J0003-1149_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0003-1149_S_2004_05_08_yyk_uvs.fits wwins J0003-1149_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J0003-1149_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457735 Jy ! Component: 100 - total flux cleaned = 0.00730448 Jy ! Component: 150 - total flux cleaned = 0.00832214 Jy ! Component: 200 - total flux cleaned = 0.00904508 Jy ! Component: 250 - total flux cleaned = 0.00980485 Jy ! Component: 300 - total flux cleaned = 0.00989282 Jy ! Component: 350 - total flux cleaned = 0.0101386 Jy ! Component: 400 - total flux cleaned = 0.0104512 Jy ! Component: 450 - total flux cleaned = 0.010821 Jy ! Component: 500 - total flux cleaned = 0.0108917 Jy ! Component: 550 - total flux cleaned = 0.0109599 Jy ! Component: 600 - total flux cleaned = 0.0111503 Jy ! Component: 650 - total flux cleaned = 0.0111495 Jy ! Component: 700 - total flux cleaned = 0.0114416 Jy ! Component: 750 - total flux cleaned = 0.0116639 Jy ! Component: 800 - total flux cleaned = 0.0118758 Jy ! Component: 850 - total flux cleaned = 0.0120288 Jy ! Component: 900 - total flux cleaned = 0.0121784 Jy ! Component: 950 - total flux cleaned = 0.0124162 Jy ! Component: 1000 - total flux cleaned = 0.0125528 Jy ! Component: 1050 - total flux cleaned = 0.0125083 Jy ! Component: 1100 - total flux cleaned = 0.0126804 Jy ! Component: 1150 - total flux cleaned = 0.0127217 Jy ! Component: 1200 - total flux cleaned = 0.0127622 Jy ! Component: 1250 - total flux cleaned = 0.0127231 Jy ! Component: 1300 - total flux cleaned = 0.0126108 Jy ! Component: 1350 - total flux cleaned = 0.0126834 Jy ! Component: 1400 - total flux cleaned = 0.0126477 Jy ! Component: 1450 - total flux cleaned = 0.0125125 Jy ! Component: 1500 - total flux cleaned = 0.0125796 Jy ! Component: 1550 - total flux cleaned = 0.0126438 Jy ! Component: 1600 - total flux cleaned = 0.012706 Jy ! Component: 1650 - total flux cleaned = 0.0128583 Jy ! Component: 1700 - total flux cleaned = 0.0130664 Jy ! Component: 1750 - total flux cleaned = 0.0133012 Jy ! Component: 1800 - total flux cleaned = 0.0136166 Jy ! Component: 1850 - total flux cleaned = 0.0138972 Jy ! Component: 1900 - total flux cleaned = 0.0140905 Jy ! Component: 1950 - total flux cleaned = 0.014307 Jy ! Component: 2000 - total flux cleaned = 0.0144131 Jy ! Total flux subtracted in 2048 components = 0.0145178 Jy ! Clean residual min=-0.001330 max=0.001555 Jy/beam ! Clean residual mean=0.000068 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.798098 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 210 components and 0.798098 Jy ![Exited script file: muppet] wmap "J0003-1149_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.752 x 14.5 at -12.48 degrees (North through East) ! Clean map min=-0.0049672 max=0.62784 Jy/beam ! Writing clean map to FITS file: J0003-1149_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.627838 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000530933 device "J0003-1149_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0003-1149_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.253696 0.253696 0.507392 1.01478 2.02957 4.05914 8.11827 16.2365 32.4731 64.9462 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.627 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.752 x 14.5 at -12.48 degrees (North through East) ! Clean map min=-0.0049672 max=0.62784 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0003-1149_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0003-1149_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0003-1149_S_2004_05_08_yyk_uvs.log closed on Tue Dec 6 23:47:06 2005