! Started logfile: J0003-1149_S_2004_04_30_yyk_uvs.log on Tue Dec  6 23:46:57 2005
obs J0003-1149_S_2004_04_30_yyk_uve.fits
! Reading UV FITS file: J0003-1149_S_2004_04_30_yyk_uve.fits
! AN table 1: 10 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.804444 visibilities/baseline/integration-bin.
! Found source: J0003-1149
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1632 lines of history.
! 
! Reading 1448 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0003-1149_S_2004_04_30_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.620172 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.511707Jy  sigma=7.217669
! Fit after  self-cal, rms=0.473332Jy  sigma=6.832587
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=12.5 mas, bpa=16.44 degrees
! Estimated noise=2.39484 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.520362 Jy
! Component: 100  -  total flux cleaned = 0.651566 Jy
! Total flux subtracted in 100 components = 0.651566 Jy
! Clean residual min=-0.025888 max=0.038464 Jy/beam
! Clean residual mean=-0.000223 rms=0.008507 Jy/beam
! Combined flux in latest and established models = 0.651566 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.651566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146325Jy  sigma=1.902782
! Fit after  self-cal, rms=0.146115Jy  sigma=1.900918
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.287 mas, bmaj=17.18 mas, bpa=16.24 degrees
! Estimated noise=1.38744 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0354017 Jy
! Component: 100  -  total flux cleaned = 0.0387089 Jy
! Component: 150  -  total flux cleaned = 0.0382045 Jy
! Component: 200  -  total flux cleaned = 0.0376421 Jy
! Total flux subtracted in 200 components = 0.0376421 Jy
! Clean residual min=-0.015440 max=0.022330 Jy/beam
! Clean residual mean=-0.000379 rms=0.005855 Jy/beam
! Combined flux in latest and established models = 0.689208 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.689208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139170Jy  sigma=1.769396
! Fit after  self-cal, rms=0.139145Jy  sigma=1.769311
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00134
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        1.07     KP        0.96     
!   LA        1.13     MK        1.00*    NL        1.00     OV        0.97     
!   PT        1.01     SC        0.86     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.03758
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.93     HN        1.04     KP        0.91     
!   LA        1.00*    MK        1.00*    NL        0.99     OV        1.00*    
!   PT        0.95     SC        0.89     
! 
! 
! Fit before self-cal, rms=0.139145Jy  sigma=1.769311
! Fit after  self-cal, rms=0.132359Jy  sigma=1.636100
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132359Jy  sigma=1.636100
! Fit after  self-cal, rms=0.132359Jy  sigma=1.636080
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.02 mas, bmaj=17.07 mas, bpa=16.85 degrees
! Estimated noise=1.38464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00992649 Jy
! Component: 100  -  total flux cleaned = 0.0126041 Jy
! Component: 150  -  total flux cleaned = 0.0128496 Jy
! Component: 200  -  total flux cleaned = 0.0129183 Jy
! Total flux subtracted in 200 components = 0.0129183 Jy
! Clean residual min=-0.011391 max=0.014162 Jy/beam
! Clean residual mean=-0.000092 rms=0.003876 Jy/beam
! Combined flux in latest and established models = 0.702127 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.702127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131610Jy  sigma=1.624611
! Fit after  self-cal, rms=0.131574Jy  sigma=1.624425
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131574Jy  sigma=1.624425
! Fit after  self-cal, rms=0.091900Jy  sigma=1.236187
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309433 Jy
! Component: 100  -  total flux cleaned = -4.60263e-07 Jy
! Component: 150  -  total flux cleaned = 0.000245235 Jy
! Component: 200  -  total flux cleaned = 0.000446045 Jy
! Total flux subtracted in 200 components = 0.000446045 Jy
! Clean residual min=-0.009016 max=0.012989 Jy/beam
! Clean residual mean=-0.000095 rms=0.003679 Jy/beam
! Combined flux in latest and established models = 0.702573 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.702573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089104Jy  sigma=1.213174
! Fit after  self-cal, rms=0.085578Jy  sigma=1.184994
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.02 x 17.07 at 16.85 degrees (North through East)
! Clean map  min=-0.0089373  max=0.62654 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085578Jy  sigma=1.184994
! Fit after  self-cal, rms=0.082507Jy  sigma=1.155092
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082507Jy  sigma=1.155092
! Fit after  self-cal, rms=0.082214Jy  sigma=1.152662
! Inverting map and beam 
! Estimated beam: bmin=4.968 mas, bmaj=16.96 mas, bpa=16.98 degrees
! Estimated noise=1.37566 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000600573 Jy
! Component: 100  -  total flux cleaned = -0.000273093 Jy
! Component: 150  -  total flux cleaned = 0.0001041 Jy
! Component: 200  -  total flux cleaned = 0.0005148 Jy
! Total flux subtracted in 200 components = 0.0005148 Jy
! Clean residual min=-0.008297 max=0.012769 Jy/beam
! Clean residual mean=-0.000064 rms=0.003348 Jy/beam
! Combined flux in latest and established models = 0.703088 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 0.703088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081298Jy  sigma=1.144991
! Fit after  self-cal, rms=0.081262Jy  sigma=1.144629
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081262Jy  sigma=1.144629
! Fit after  self-cal, rms=0.072559Jy  sigma=0.970499
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072559Jy  sigma=0.970499
! Fit after  self-cal, rms=0.072528Jy  sigma=0.970374
! Inverting map and beam 
! Estimated beam: bmin=4.927 mas, bmaj=16.96 mas, bpa=17.05 degrees
! Estimated noise=1.3733 mJy/beam.
! Added new window around map position (12.5, -3.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123583 Jy
! Component: 100  -  total flux cleaned = 0.0133747 Jy
! Component: 150  -  total flux cleaned = 0.0139149 Jy
! Component: 200  -  total flux cleaned = 0.0144829 Jy
! Total flux subtracted in 200 components = 0.0144829 Jy
! Clean residual min=-0.004676 max=0.005260 Jy/beam
! Clean residual mean=-0.000057 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.71757 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 108 components and 0.71757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070326Jy  sigma=0.930348
! Fit after  self-cal, rms=0.070199Jy  sigma=0.928705
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.95 mas, bmaj=19.46 mas, bpa=4.533 degrees
! Estimated noise=1.48984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258602 Jy
! Component: 100  -  total flux cleaned = 0.00303179 Jy
! Component: 150  -  total flux cleaned = 0.00314921 Jy
! Component: 200  -  total flux cleaned = 0.00315155 Jy
! Total flux subtracted in 200 components = 0.00315155 Jy
! Clean residual min=-0.003787 max=0.004423 Jy/beam
! Clean residual mean=-0.000089 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.720722 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 133 components and 0.720722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070093Jy  sigma=0.927012
! Fit after  self-cal, rms=0.070075Jy  sigma=0.926887
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=12.58 mas, bpa=17.1 degrees
! Estimated noise=2.32856 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.514771 Jy
! Component: 100  -  total flux cleaned = 0.642331 Jy
! Component: 150  -  total flux cleaned = 0.680445 Jy
! Component: 200  -  total flux cleaned = 0.692098 Jy
! Total flux subtracted in 200 components = 0.692098 Jy
! Clean residual min=-0.015119 max=0.011608 Jy/beam
! Clean residual mean=0.000009 rms=0.003725 Jy/beam
! Combined flux in latest and established models = 0.692098 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.692098 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.927 mas, bmaj=16.96 mas, bpa=17.05 degrees
! Estimated noise=1.3733 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149898 Jy
! Component: 100  -  total flux cleaned = 0.023505 Jy
! Component: 150  -  total flux cleaned = 0.0259203 Jy
! Component: 200  -  total flux cleaned = 0.0274359 Jy
! Total flux subtracted in 200 components = 0.0274359 Jy
! Clean residual min=-0.005861 max=0.005103 Jy/beam
! Clean residual mean=-0.000071 rms=0.001612 Jy/beam
! Combined flux in latest and established models = 0.719533 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 80 components and 0.719534 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.95 mas, bmaj=19.46 mas, bpa=4.533 degrees
! Estimated noise=1.48984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287236 Jy
! Component: 100  -  total flux cleaned = 0.0027747 Jy
! Component: 150  -  total flux cleaned = 0.00284831 Jy
! Component: 200  -  total flux cleaned = 0.00277485 Jy
! Total flux subtracted in 200 components = 0.00277485 Jy
! Clean residual min=-0.003550 max=0.004301 Jy/beam
! Clean residual mean=-0.000099 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.722308 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 115 components and 0.722308 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.927 mas, bmaj=16.96 mas, bpa=17.05 degrees
! Estimated noise=1.3733 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0015639 Jy
! Component: 100  -  total flux cleaned = -0.00145068 Jy
! Component: 150  -  total flux cleaned = -0.00114911 Jy
! Component: 200  -  total flux cleaned = -0.000968149 Jy
! Total flux subtracted in 200 components = -0.000968149 Jy
! Clean residual min=-0.004759 max=0.005002 Jy/beam
! Clean residual mean=-0.000073 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.72134 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 0.72134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069822Jy  sigma=0.925271
! Fit after  self-cal, rms=0.069675Jy  sigma=0.924498
wmodel J0003-1149_S_2004_04_30_yyk\_map.mod
! Writing 131 model components to file: J0003-1149_S_2004_04_30_yyk_map.mod
wobs J0003-1149_S_2004_04_30_yyk\_uvs.fits
! Writing UV FITS file: J0003-1149_S_2004_04_30_yyk_uvs.fits
wwins J0003-1149_S_2004_04_30_yyk\_map.win
! wwins: Wrote 2 windows to J0003-1149_S_2004_04_30_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000630583 Jy
! Component: 100  -  total flux cleaned = 0.000848422 Jy
! Component: 150  -  total flux cleaned = 0.00124064 Jy
! Component: 200  -  total flux cleaned = 0.0015894 Jy
! Component: 250  -  total flux cleaned = 0.00174667 Jy
! Component: 300  -  total flux cleaned = 0.00179758 Jy
! Component: 350  -  total flux cleaned = 0.00174974 Jy
! Component: 400  -  total flux cleaned = 0.00174902 Jy
! Component: 450  -  total flux cleaned = 0.00197346 Jy
! Component: 500  -  total flux cleaned = 0.0021485 Jy
! Component: 550  -  total flux cleaned = 0.00227729 Jy
! Component: 600  -  total flux cleaned = 0.00244311 Jy
! Component: 650  -  total flux cleaned = 0.00276598 Jy
! Component: 700  -  total flux cleaned = 0.00308139 Jy
! Component: 750  -  total flux cleaned = 0.00331244 Jy
! Component: 800  -  total flux cleaned = 0.00361441 Jy
! Component: 850  -  total flux cleaned = 0.00387215 Jy
! Component: 900  -  total flux cleaned = 0.00412503 Jy
! Component: 950  -  total flux cleaned = 0.00440735 Jy
! Component: 1000  -  total flux cleaned = 0.00457953 Jy
! Component: 1050  -  total flux cleaned = 0.00468062 Jy
! Component: 1100  -  total flux cleaned = 0.00481353 Jy
! Component: 1150  -  total flux cleaned = 0.00491097 Jy
! Component: 1200  -  total flux cleaned = 0.00503874 Jy
! Component: 1250  -  total flux cleaned = 0.00510152 Jy
! Component: 1300  -  total flux cleaned = 0.00525465 Jy
! Component: 1350  -  total flux cleaned = 0.00534455 Jy
! Component: 1400  -  total flux cleaned = 0.0053739 Jy
! Component: 1450  -  total flux cleaned = 0.00537408 Jy
! Component: 1500  -  total flux cleaned = 0.00537415 Jy
! Component: 1550  -  total flux cleaned = 0.00537431 Jy
! Component: 1600  -  total flux cleaned = 0.00540177 Jy
! Component: 1650  -  total flux cleaned = 0.00537442 Jy
! Component: 1700  -  total flux cleaned = 0.00540143 Jy
! Component: 1750  -  total flux cleaned = 0.00548114 Jy
! Component: 1800  -  total flux cleaned = 0.00550729 Jy
! Component: 1850  -  total flux cleaned = 0.00555859 Jy
! Component: 1900  -  total flux cleaned = 0.00560966 Jy
! Component: 1950  -  total flux cleaned = 0.00568522 Jy
! Component: 2000  -  total flux cleaned = 0.00573495 Jy
! Total flux subtracted in 2048 components = 0.0057348 Jy
! Clean residual min=-0.001226 max=0.001308 Jy/beam
! Clean residual mean=-0.000035 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.727075 Jy
keep
! Adding 96 model components to the UV plane model.
! The established model now contains 227 components and 0.727075 Jy
![Exited script file: muppet]
wmap "J0003-1149_S_2004_04_30_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.927 x 16.96 at 17.05 degrees (North through East)
! Clean map  min=-0.0038286  max=0.61819 Jy/beam
! Writing clean map to FITS file: J0003-1149_S_2004_04_30_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.618186 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000465365 
device "J0003-1149_S_2004_04_30_yyk\_map.eps/VPS"
! Attempting to open device: 'J0003-1149_S_2004_04_30_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.225838 0.225838 0.451675 0.903351 1.8067 3.6134 7.2268 14.4536 28.9072 57.8144
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.618 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.927 x 16.96 at 17.05 degrees (North through East)
! Clean map  min=-0.0038286  max=0.61819 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0003-1149_S_2004_04_30_yyk\_map.gif/gif"
! Attempting to open device: 'J0003-1149_S_2004_04_30_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0003-1149_S_2004_04_30_yyk_uvs.log closed on Tue Dec  6 23:47:01 2005