! Started logfile: J2359-3133_S_2002_05_14_yyk_uvs.log on Tue Jun 26 23:27:31 2007 obs J2359-3133_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J2359-3133_S_2002_05_14_yyk_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.734167 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 10572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2359-3133_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.580858 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.282 mas, bpa=-0.795 degrees ! Estimated noise=1965.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.454594 Jy ! Component: 100 - total flux cleaned = 0.520773 Jy ! Total flux subtracted in 100 components = 0.520773 Jy ! Clean residual min=-0.018258 max=0.025995 Jy/beam ! Clean residual mean=0.000039 rms=0.005402 Jy/beam ! Combined flux in latest and established models = 0.520772 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.520772 Jy ! ! Correcting IF 1. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.260593Jy sigma=0.001309 ! Fit after self-cal, rms=0.259954Jy sigma=0.001308 ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.282 mas, bpa=-0.795 degrees ! Estimated noise=1965.32 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=8.067 mas, bpa=0.7991 degrees ! Estimated noise=1224.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.032255 Jy ! Component: 100 - total flux cleaned = 0.0450993 Jy ! Component: 150 - total flux cleaned = 0.0473099 Jy ! Component: 200 - total flux cleaned = 0.0482911 Jy ! Total flux subtracted in 200 components = 0.0482911 Jy ! Clean residual min=-0.011417 max=0.013221 Jy/beam ! Clean residual mean=0.000241 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 0.569064 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 39 components and 0.569064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256121Jy sigma=0.001290 ! Fit after self-cal, rms=0.256004Jy sigma=0.001289 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.367 x 8.067 at 0.7991 degrees (North through East) ! Clean map min=-0.011077 max=0.51614 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00251 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.13 HN 1.03 KP 0.96 ! LA 0.97 NL 0.91 OV 1.03 PT 1.07 ! SC 1.04 MK 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.973073 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.27 KP 1.00* ! LA 0.96 NL 1.00 OV 1.03 PT 1.01 ! SC 1.00 MK 1.07 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.962505 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.27 KP 0.98 ! LA 0.98 NL 1.06 OV 1.05 PT 1.16 ! SC 0.96 MK 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02953 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.85 HN 1.13 KP 1.06 ! LA 0.81 NL 1.03 OV 0.93 PT 1.00 ! SC 0.92 MK 0.99 ! ! ! Fit before self-cal, rms=0.256004Jy sigma=0.001289 ! Fit after self-cal, rms=0.254120Jy sigma=0.001247 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254120Jy sigma=0.001247 ! Fit after self-cal, rms=0.254128Jy sigma=0.001247 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.383 mas, bmaj=8.007 mas, bpa=1.736 degrees ! Estimated noise=1201.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0066846 Jy ! Component: 100 - total flux cleaned = -0.00666209 Jy ! Component: 150 - total flux cleaned = -0.00666029 Jy ! Component: 200 - total flux cleaned = -0.00684475 Jy ! Total flux subtracted in 200 components = -0.00684475 Jy ! Clean residual min=-0.008318 max=0.007442 Jy/beam ! Clean residual mean=0.000129 rms=0.002122 Jy/beam ! Combined flux in latest and established models = 0.562219 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.562219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252967Jy sigma=0.001244 ! Fit after self-cal, rms=0.252957Jy sigma=0.001244 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252957Jy sigma=0.001244 ! Fit after self-cal, rms=0.249440Jy sigma=0.001222 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144207 Jy ! Component: 100 - total flux cleaned = 0.00160203 Jy ! Component: 150 - total flux cleaned = 0.00160749 Jy ! Component: 200 - total flux cleaned = 0.00174174 Jy ! Total flux subtracted in 200 components = 0.00174174 Jy ! Clean residual min=-0.007999 max=0.007022 Jy/beam ! Clean residual mean=0.000122 rms=0.002050 Jy/beam ! Combined flux in latest and established models = 0.563961 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.563961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249084Jy sigma=0.001221 ! Fit after self-cal, rms=0.248660Jy sigma=0.001218 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.383 x 8.007 at 1.736 degrees (North through East) ! Clean map min=-0.0084896 max=0.51534 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248660Jy sigma=0.001218 ! Fit after self-cal, rms=0.324890Jy sigma=0.001187 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324890Jy sigma=0.001187 ! Fit after self-cal, rms=0.324870Jy sigma=0.001187 ! Inverting map and beam ! Estimated beam: bmin=3.368 mas, bmaj=8.023 mas, bpa=1.524 degrees ! Estimated noise=1195.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000987528 Jy ! Component: 100 - total flux cleaned = -0.00100316 Jy ! Component: 150 - total flux cleaned = -0.000882781 Jy ! Component: 200 - total flux cleaned = -0.00088351 Jy ! Total flux subtracted in 200 components = -0.00088351 Jy ! Clean residual min=-0.004880 max=0.005195 Jy/beam ! Clean residual mean=0.000087 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.563077 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.563077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324801Jy sigma=0.001186 ! Fit after self-cal, rms=0.324797Jy sigma=0.001186 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324797Jy sigma=0.001186 ! Fit after self-cal, rms=0.332022Jy sigma=0.001182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332022Jy sigma=0.001182 ! Fit after self-cal, rms=0.332059Jy sigma=0.001182 ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=8.039 mas, bpa=1.549 degrees ! Estimated noise=1193.99 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000976434 Jy ! Component: 100 - total flux cleaned = -0.000978645 Jy ! Component: 150 - total flux cleaned = -0.000891837 Jy ! Component: 200 - total flux cleaned = -0.000975944 Jy ! Total flux subtracted in 200 components = -0.000975944 Jy ! Clean residual min=-0.004743 max=0.004948 Jy/beam ! Clean residual mean=0.000077 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.562101 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.562101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332039Jy sigma=0.001182 ! Fit after self-cal, rms=0.332062Jy sigma=0.001182 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.215 mas, bmaj=23.16 mas, bpa=4.513 degrees ! Estimated noise=1480.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702809 Jy ! Component: 100 - total flux cleaned = 0.000702575 Jy ! Component: 150 - total flux cleaned = 0.000754273 Jy ! Component: 200 - total flux cleaned = 0.000801948 Jy ! Total flux subtracted in 200 components = 0.000801948 Jy ! Clean residual min=-0.004588 max=0.004503 Jy/beam ! Clean residual mean=0.000139 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.562903 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.562903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332069Jy sigma=0.001181 ! Fit after self-cal, rms=0.332089Jy sigma=0.001182 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.442 mas, bmaj=6.216 mas, bpa=-0.6809 degrees ! Estimated noise=1947.67 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.452696 Jy ! Component: 100 - total flux cleaned = 0.516656 Jy ! Component: 150 - total flux cleaned = 0.536731 Jy ! Component: 200 - total flux cleaned = 0.547079 Jy ! Total flux subtracted in 200 components = 0.547079 Jy ! Clean residual min=-0.008574 max=0.008884 Jy/beam ! Clean residual mean=0.000024 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 0.547079 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.547079 Jy ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=8.039 mas, bpa=1.549 degrees ! Estimated noise=1193.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789475 Jy ! Component: 100 - total flux cleaned = 0.0110965 Jy ! Component: 150 - total flux cleaned = 0.0119533 Jy ! Component: 200 - total flux cleaned = 0.0124713 Jy ! Total flux subtracted in 200 components = 0.0124713 Jy ! Clean residual min=-0.004837 max=0.004507 Jy/beam ! Clean residual mean=0.000094 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.559551 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.559551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.215 mas, bmaj=23.16 mas, bpa=4.513 degrees ! Estimated noise=1480.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141308 Jy ! Component: 100 - total flux cleaned = 0.00160246 Jy ! Component: 150 - total flux cleaned = 0.00167309 Jy ! Component: 200 - total flux cleaned = 0.00173588 Jy ! Total flux subtracted in 200 components = 0.00173588 Jy ! Clean residual min=-0.004431 max=0.004659 Jy/beam ! Clean residual mean=0.000159 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.561287 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 0.561287 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=8.039 mas, bpa=1.549 degrees ! Estimated noise=1193.99 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570058 Jy ! Component: 100 - total flux cleaned = -0.000692947 Jy ! Component: 150 - total flux cleaned = -0.000643847 Jy ! Component: 200 - total flux cleaned = -0.000597558 Jy ! Total flux subtracted in 200 components = -0.000597558 Jy ! Clean residual min=-0.004817 max=0.004553 Jy/beam ! Clean residual mean=0.000085 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.560689 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.560689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332335Jy sigma=0.001181 ! Fit after self-cal, rms=0.332344Jy sigma=0.001181 wmodel J2359-3133_S_2002_05_14_yyk\_map.mod ! Writing 69 model components to file: J2359-3133_S_2002_05_14_yyk_map.mod wobs J2359-3133_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J2359-3133_S_2002_05_14_yyk_uvs.fits wwins J2359-3133_S_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J2359-3133_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.17912e-07 Jy ! Component: 100 - total flux cleaned = -0.000228578 Jy ! Component: 150 - total flux cleaned = -0.000373402 Jy ! Component: 200 - total flux cleaned = -0.000376347 Jy ! Component: 250 - total flux cleaned = -0.000376756 Jy ! Component: 300 - total flux cleaned = -0.000495657 Jy ! Component: 350 - total flux cleaned = -0.000493986 Jy ! Component: 400 - total flux cleaned = -0.000548788 Jy ! Component: 450 - total flux cleaned = -0.000817033 Jy ! Component: 500 - total flux cleaned = -0.00097363 Jy ! Component: 550 - total flux cleaned = -0.00107562 Jy ! Component: 600 - total flux cleaned = -0.00117528 Jy ! Component: 650 - total flux cleaned = -0.00122374 Jy ! Component: 700 - total flux cleaned = -0.00127134 Jy ! Component: 750 - total flux cleaned = -0.00141136 Jy ! Component: 800 - total flux cleaned = -0.00131997 Jy ! Component: 850 - total flux cleaned = -0.0014092 Jy ! Component: 900 - total flux cleaned = -0.00127771 Jy ! Component: 950 - total flux cleaned = -0.00140684 Jy ! Component: 1000 - total flux cleaned = -0.00136503 Jy ! Component: 1050 - total flux cleaned = -0.00144808 Jy ! Component: 1100 - total flux cleaned = -0.00136633 Jy ! Component: 1150 - total flux cleaned = -0.00132643 Jy ! Component: 1200 - total flux cleaned = -0.00120914 Jy ! Component: 1250 - total flux cleaned = -0.00117026 Jy ! Component: 1300 - total flux cleaned = -0.00105557 Jy ! Component: 1350 - total flux cleaned = -0.00101775 Jy ! Component: 1400 - total flux cleaned = -0.000980587 Jy ! Component: 1450 - total flux cleaned = -0.00101679 Jy ! Component: 1500 - total flux cleaned = -0.00087241 Jy ! Component: 1550 - total flux cleaned = -0.000837117 Jy ! Component: 1600 - total flux cleaned = -0.000767014 Jy ! Component: 1650 - total flux cleaned = -0.000663601 Jy ! Component: 1700 - total flux cleaned = -0.000595608 Jy ! Component: 1750 - total flux cleaned = -0.000494747 Jy ! Component: 1800 - total flux cleaned = -0.000361588 Jy ! Component: 1850 - total flux cleaned = -0.000296143 Jy ! Component: 1900 - total flux cleaned = -0.000231214 Jy ! Component: 1950 - total flux cleaned = -3.87538e-05 Jy ! Component: 2000 - total flux cleaned = 5.64175e-05 Jy ! Total flux subtracted in 2048 components = 0.000213362 Jy ! Clean residual min=-0.002261 max=0.001778 Jy/beam ! Clean residual mean=0.000065 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.560903 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 209 components and 0.560902 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 8.039 at 1.549 degrees (North through East) ! Clean map min=-0.0034966 max=0.51999 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.519992 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000656427 device "J2359-3133_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J2359-3133_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.378714 0.378714 0.757428 1.51486 3.02971 6.05943 12.1189 24.2377 48.4754 96.9508 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.519 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 8.039 at 1.549 degrees (North through East) ! Clean map min=-0.0034966 max=0.51999 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2359-3133_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J2359-3133_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2359-3133_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 23:27:39 2007