! Started logfile: J2314-4455_S_2002_01_31_yyk_uvs.log on Tue Jun 26 23:24:40 2007 obs J2314-4455_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J2314-4455_S_2002_01_31_yyk_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.130065 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2314-4455 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1225 lines of history. ! ! Reading 796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2314-4455_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.34326 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.11 mas, bmaj=139.8 mas, bpa=4.16 degrees ! Estimated noise=6533.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.132076 Jy ! Component: 100 - total flux cleaned = 0.246835 Jy ! Total flux subtracted in 100 components = 0.246835 Jy ! Clean residual min=-0.103092 max=0.106657 Jy/beam ! Clean residual mean=0.010276 rms=0.033008 Jy/beam ! Combined flux in latest and established models = 0.246835 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.246835 Jy ! ! Correcting IF 1. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.303805Jy sigma=0.008229 ! Fit after self-cal, rms=1.295948Jy sigma=0.008165 ! Inverting map and beam ! Estimated beam: bmin=11.11 mas, bmaj=139.8 mas, bpa=4.161 degrees ! Estimated noise=6536.18 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.91 mas, bmaj=132.3 mas, bpa=3.66 degrees ! Estimated noise=3984.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.154548 Jy ! Component: 100 - total flux cleaned = 0.14226 Jy ! Component: 150 - total flux cleaned = 0.103881 Jy ! Component: 200 - total flux cleaned = 0.0914593 Jy ! Total flux subtracted in 200 components = 0.0914593 Jy ! Clean residual min=-0.045682 max=0.043310 Jy/beam ! Clean residual mean=0.006424 rms=0.021153 Jy/beam ! Combined flux in latest and established models = 0.338294 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 109 model components to the UV plane model. ! The established model now contains 136 components and 0.338294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.245528Jy sigma=0.007893 ! Fit after self-cal, rms=1.243157Jy sigma=0.007879 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 11.91 x 132.3 at 3.66 degrees (North through East) ! Clean map min=-0.14939 max=0.40282 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.73401 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.77 HN 1.00* KP 1.00* ! LA 0.63 MK 1.00* NL 1.00* OV 2.93 ! PT 3.30 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.781613 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 2.89 HN 1.00* KP 1.00* ! LA 0.65 MK 1.00* NL 1.00* OV 2.55 ! PT 0.70 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03756 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.53 HN 1.00* KP 1.00* ! LA 1.08 MK 1.00* NL 1.00* OV 1.34 ! PT 0.69 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01394 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.00* KP 1.00* ! LA 0.81 MK 1.00* NL 1.00* OV 1.05 ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=1.243157Jy sigma=0.007879 ! Fit after self-cal, rms=1.826807Jy sigma=0.007956 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.826807Jy sigma=0.007956 ! Fit after self-cal, rms=1.827466Jy sigma=0.007956 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=19.34 mas, bmaj=115.5 mas, bpa=6.45 degrees ! Estimated noise=2528.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0233366 Jy ! Component: 100 - total flux cleaned = -0.085224 Jy ! Component: 150 - total flux cleaned = -0.184708 Jy ! Component: 200 - total flux cleaned = -0.335192 Jy ! Total flux subtracted in 200 components = -0.335192 Jy ! Clean residual min=-0.149437 max=0.147455 Jy/beam ! Clean residual mean=0.001456 rms=0.049646 Jy/beam ! Combined flux in latest and established models = 0.003102 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 182 components and 0.00310192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.839962Jy sigma=0.007987 ! Fit after self-cal, rms=1.839723Jy sigma=0.007979 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.839723Jy sigma=0.007979 ! Fit after self-cal, rms=1.814827Jy sigma=0.007753 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0313621 Jy ! Component: 100 - total flux cleaned = -0.0185324 Jy ! Component: 150 - total flux cleaned = 0.0110245 Jy ! Component: 200 - total flux cleaned = 0.0494059 Jy ! Total flux subtracted in 200 components = 0.0494059 Jy ! Clean residual min=-0.066223 max=0.066868 Jy/beam ! Clean residual mean=0.011660 rms=0.022678 Jy/beam ! Combined flux in latest and established models = 0.0525078 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 214 components and 0.0525078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.812510Jy sigma=0.007665 ! Fit after self-cal, rms=1.809590Jy sigma=0.007645 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 19.34 x 115.5 at 6.45 degrees (North through East) ! Clean map min=-0.31012 max=0.32066 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.809590Jy sigma=0.007645 ! Fit after self-cal, rms=3.321024Jy sigma=0.007408 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.321024Jy sigma=0.007408 ! Fit after self-cal, rms=3.319449Jy sigma=0.007334 ! Inverting map and beam ! Estimated beam: bmin=19.41 mas, bmaj=152.6 mas, bpa=3.314 degrees ! Estimated noise=1897.52 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569531 Jy ! Component: 100 - total flux cleaned = 0.0901363 Jy ! Component: 150 - total flux cleaned = 0.118097 Jy ! Component: 200 - total flux cleaned = 0.106928 Jy ! Total flux subtracted in 200 components = 0.106928 Jy ! Clean residual min=-0.036617 max=0.036136 Jy/beam ! Clean residual mean=0.003523 rms=0.014994 Jy/beam ! Combined flux in latest and established models = 0.159436 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 240 components and 0.159436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.340096Jy sigma=0.007309 ! Fit after self-cal, rms=3.335117Jy sigma=0.007222 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.335117Jy sigma=0.007222 ! Fit after self-cal, rms=1.926128Jy sigma=0.007153 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.926128Jy sigma=0.007153 ! Fit after self-cal, rms=1.924722Jy sigma=0.007122 ! Inverting map and beam ! Estimated beam: bmin=19.3 mas, bmaj=166.1 mas, bpa=2.896 degrees ! Estimated noise=1563.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351837 Jy ! Component: 100 - total flux cleaned = 0.00200484 Jy ! Component: 150 - total flux cleaned = -0.00602214 Jy ! Component: 200 - total flux cleaned = -0.00591392 Jy ! Total flux subtracted in 200 components = -0.00591392 Jy ! Clean residual min=-0.008870 max=0.008820 Jy/beam ! Clean residual mean=0.001548 rms=0.002574 Jy/beam ! Combined flux in latest and established models = 0.153522 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 267 components and 0.153522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.920276Jy sigma=0.007110 ! Fit after self-cal, rms=1.919864Jy sigma=0.007093 ! Inverting map ! Added new window around map position (-3.5, 30). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318725 Jy ! Component: 100 - total flux cleaned = 0.000556247 Jy ! Component: 150 - total flux cleaned = -0.000893511 Jy ! Component: 200 - total flux cleaned = -0.00195014 Jy ! Total flux subtracted in 200 components = -0.00195014 Jy ! Clean residual min=-0.003505 max=0.004018 Jy/beam ! Clean residual mean=-0.000052 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.151572 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 91 model components to the UV plane model. ! The established model now contains 353 components and 0.151572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.919744Jy sigma=0.007088 ! Fit after self-cal, rms=1.919911Jy sigma=0.007082 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=20.58 mas, bmaj=166.2 mas, bpa=2.984 degrees ! Estimated noise=1567.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163661 Jy ! Component: 100 - total flux cleaned = -0.0029401 Jy ! Component: 150 - total flux cleaned = -0.00419481 Jy ! Component: 200 - total flux cleaned = -0.00505526 Jy ! Total flux subtracted in 200 components = -0.00505526 Jy ! Clean residual min=-0.003785 max=0.002571 Jy/beam ! Clean residual mean=-0.000115 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.146517 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 389 components and 0.146517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.919263Jy sigma=0.007080 ! Fit after self-cal, rms=1.920298Jy sigma=0.007080 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.94 mas, bmaj=146.5 mas, bpa=4.104 degrees ! Estimated noise=3220.44 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.256629 Jy ! Component: 100 - total flux cleaned = 0.234058 Jy ! Component: 150 - total flux cleaned = 0.216147 Jy ! Component: 200 - total flux cleaned = 0.216191 Jy ! Total flux subtracted in 200 components = 0.216191 Jy ! Clean residual min=-0.059993 max=0.062441 Jy/beam ! Clean residual mean=0.002568 rms=0.019729 Jy/beam ! Combined flux in latest and established models = 0.216191 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.216191 Jy ! Inverting map and beam ! Estimated beam: bmin=19.3 mas, bmaj=166.1 mas, bpa=2.896 degrees ! Estimated noise=1563.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.022028 Jy ! Component: 100 - total flux cleaned = 0.0240646 Jy ! Component: 150 - total flux cleaned = 0.0303218 Jy ! Component: 200 - total flux cleaned = 0.032835 Jy ! Total flux subtracted in 200 components = 0.032835 Jy ! Clean residual min=-0.052565 max=0.057309 Jy/beam ! Clean residual mean=-0.001213 rms=0.023138 Jy/beam ! Combined flux in latest and established models = 0.249026 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 93 components and 0.249026 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=20.58 mas, bmaj=166.2 mas, bpa=2.984 degrees ! Estimated noise=1567.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377442 Jy ! Component: 100 - total flux cleaned = 0.00942835 Jy ! Component: 150 - total flux cleaned = 0.02704 Jy ! Component: 200 - total flux cleaned = 0.0336089 Jy ! Total flux subtracted in 200 components = 0.0336089 Jy ! Clean residual min=-0.074061 max=0.069961 Jy/beam ! Clean residual mean=0.003559 rms=0.038478 Jy/beam ! Combined flux in latest and established models = 0.282635 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.282635 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=19.3 mas, bmaj=166.1 mas, bpa=2.896 degrees ! Estimated noise=1563.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472482 Jy ! Component: 100 - total flux cleaned = 0.00458305 Jy ! Component: 150 - total flux cleaned = 0.00420465 Jy ! Component: 200 - total flux cleaned = -0.0050048 Jy ! Total flux subtracted in 200 components = -0.0050048 Jy ! Clean residual min=-0.103717 max=0.106053 Jy/beam ! Clean residual mean=-0.004854 rms=0.053011 Jy/beam ! Combined flux in latest and established models = 0.277631 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.277631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.951689Jy sigma=0.007570 ! Fit after self-cal, rms=1.947755Jy sigma=0.007277 wmodel J2314-4455_S_2002_01_31_yyk\_map.mod ! Writing 117 model components to file: J2314-4455_S_2002_01_31_yyk_map.mod wobs J2314-4455_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J2314-4455_S_2002_01_31_yyk_uvs.fits wwins J2314-4455_S_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J2314-4455_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00187089 Jy ! Component: 100 - total flux cleaned = -0.001886 Jy ! Component: 150 - total flux cleaned = -0.00190474 Jy ! Component: 200 - total flux cleaned = -0.00191837 Jy ! Component: 250 - total flux cleaned = -0.0076346 Jy ! Component: 300 - total flux cleaned = -0.014567 Jy ! Component: 350 - total flux cleaned = -0.0211929 Jy ! Component: 400 - total flux cleaned = -0.0286366 Jy ! Component: 450 - total flux cleaned = -0.0357643 Jy ! Component: 500 - total flux cleaned = -0.0437845 Jy ! Component: 550 - total flux cleaned = -0.0443826 Jy ! Component: 600 - total flux cleaned = -0.0429992 Jy ! Component: 650 - total flux cleaned = -0.0415496 Jy ! Component: 700 - total flux cleaned = -0.0407864 Jy ! Component: 750 - total flux cleaned = -0.038329 Jy ! Component: 800 - total flux cleaned = -0.0391908 Jy ! Component: 850 - total flux cleaned = -0.0383141 Jy ! Component: 900 - total flux cleaned = -0.037341 Jy ! Component: 950 - total flux cleaned = -0.0383749 Jy ! Component: 1000 - total flux cleaned = -0.0383753 Jy ! Component: 1050 - total flux cleaned = -0.0383488 Jy ! Component: 1100 - total flux cleaned = -0.0395626 Jy ! Component: 1150 - total flux cleaned = -0.0408379 Jy ! Component: 1200 - total flux cleaned = -0.0408159 Jy ! Component: 1250 - total flux cleaned = -0.0423159 Jy ! Component: 1300 - total flux cleaned = -0.0423142 Jy ! Component: 1350 - total flux cleaned = -0.0422746 Jy ! Component: 1400 - total flux cleaned = -0.0422012 Jy ! Component: 1450 - total flux cleaned = -0.042198 Jy ! Component: 1500 - total flux cleaned = -0.0422023 Jy ! Component: 1550 - total flux cleaned = -0.040028 Jy ! Component: 1600 - total flux cleaned = -0.0400009 Jy ! Component: 1650 - total flux cleaned = -0.0375448 Jy ! Component: 1700 - total flux cleaned = -0.0375476 Jy ! Component: 1750 - total flux cleaned = -0.0346498 Jy ! Component: 1800 - total flux cleaned = -0.0346794 Jy ! Component: 1850 - total flux cleaned = -0.0347116 Jy ! Component: 1900 - total flux cleaned = -0.031392 Jy ! Component: 1950 - total flux cleaned = -0.0313493 Jy ! Component: 2000 - total flux cleaned = -0.0314284 Jy ! Total flux subtracted in 2048 components = -0.0274149 Jy ! Clean residual min=-0.231206 max=0.240752 Jy/beam ! Clean residual mean=0.048184 rms=0.086709 Jy/beam ! Combined flux in latest and established models = 0.250215 Jy keep ! Adding 65 model components to the UV plane model. ! The established model now contains 182 components and 0.250216 Jy ![Exited script file: muppet] wmap "J2314-4455_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 19.3 x 166.1 at 2.896 degrees (North through East) ! Clean map min=-0.33618 max=0.5543 Jy/beam ! Writing clean map to FITS file: J2314-4455_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.554298 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.152392 device "J2314-4455_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J2314-4455_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -82.4784 82.4784 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.4571 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.554 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 19.3 x 166.1 at 2.896 degrees (North through East) ! Clean map min=-0.33618 max=0.5543 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2314-4455_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J2314-4455_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2314-4455_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 23:24:52 2007