! Started logfile: J2248-3235_X_2002_01_31_yyk_uvs.log on Wed Jun 27 11:05:25 2007 obs J2248-3235_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J2248-3235_X_2002_01_31_yyk_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.639232 visibilities/baseline/integration-bin. ! Found source: J2248-3235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 9320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J2248-3235_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.242274 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6476 mas, bmaj=1.621 mas, bpa=3.348 degrees ! Estimated noise=1866.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.109536 Jy ! Component: 100 - total flux cleaned = 0.138961 Jy ! Total flux subtracted in 100 components = 0.138961 Jy ! Clean residual min=-0.010917 max=0.012761 Jy/beam ! Clean residual mean=-0.000022 rms=0.002778 Jy/beam ! Combined flux in latest and established models = 0.138961 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.138961 Jy ! ! Correcting IF 1. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 198 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.196767Jy sigma=0.001203 ! Fit after self-cal, rms=0.196655Jy sigma=0.001202 ! Inverting map and beam ! Estimated beam: bmin=0.6476 mas, bmaj=1.621 mas, bpa=3.348 degrees ! Estimated noise=1866.97 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8549 mas, bmaj=2.164 mas, bpa=4.914 degrees ! Estimated noise=1118.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250941 Jy ! Component: 100 - total flux cleaned = 0.0333357 Jy ! Component: 150 - total flux cleaned = 0.0353928 Jy ! Component: 200 - total flux cleaned = 0.0357551 Jy ! Total flux subtracted in 200 components = 0.0357551 Jy ! Clean residual min=-0.006747 max=0.006864 Jy/beam ! Clean residual mean=0.000009 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 0.174716 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 52 components and 0.174716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195104Jy sigma=0.001186 ! Fit after self-cal, rms=0.195099Jy sigma=0.001186 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8549 x 2.164 at 4.914 degrees (North through East) ! Clean map min=-0.0063009 max=0.13736 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00016 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 1.00* KP 1.08 ! LA 1.11 MK 0.99 NL 1.00* OV 0.89 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01217 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 1.00* KP 0.99 ! LA 1.09 MK 1.01 NL 1.00* OV 0.87 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.989097 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.00* KP 1.00 ! LA 1.15 MK 0.97 NL 1.00* OV 0.96 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.966717 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.88 HN 1.00* KP 1.06 ! LA 1.18 MK 1.05 NL 1.00* OV 0.96 ! PT 1.11 SC 1.02 ! ! ! Fit before self-cal, rms=0.195099Jy sigma=0.001186 ! Fit after self-cal, rms=0.198234Jy sigma=0.001181 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198234Jy sigma=0.001181 ! Fit after self-cal, rms=0.198237Jy sigma=0.001181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8578 mas, bmaj=2.18 mas, bpa=5.004 degrees ! Estimated noise=1093.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000824706 Jy ! Component: 100 - total flux cleaned = 0.00108991 Jy ! Component: 150 - total flux cleaned = 0.00130872 Jy ! Component: 200 - total flux cleaned = 0.00150082 Jy ! Total flux subtracted in 200 components = 0.00150082 Jy ! Clean residual min=-0.004999 max=0.004791 Jy/beam ! Clean residual mean=-0.000011 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.176217 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.176217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198174Jy sigma=0.001180 ! Fit after self-cal, rms=0.198170Jy sigma=0.001180 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198170Jy sigma=0.001180 ! Fit after self-cal, rms=0.196599Jy sigma=0.001169 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207567 Jy ! Component: 100 - total flux cleaned = 0.00240106 Jy ! Component: 150 - total flux cleaned = 0.00262961 Jy ! Component: 200 - total flux cleaned = 0.00273123 Jy ! Total flux subtracted in 200 components = 0.00273123 Jy ! Clean residual min=-0.005213 max=0.004756 Jy/beam ! Clean residual mean=-0.000012 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.178948 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.178948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196569Jy sigma=0.001169 ! Fit after self-cal, rms=0.196338Jy sigma=0.001167 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8578 x 2.18 at 5.004 degrees (North through East) ! Clean map min=-0.0049616 max=0.13696 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196338Jy sigma=0.001167 ! Fit after self-cal, rms=0.198493Jy sigma=0.001166 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198493Jy sigma=0.001166 ! Fit after self-cal, rms=0.198427Jy sigma=0.001165 ! Inverting map and beam ! Estimated beam: bmin=0.844 mas, bmaj=2.146 mas, bpa=5.165 degrees ! Estimated noise=1084.22 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206196 Jy ! Component: 100 - total flux cleaned = 0.00250628 Jy ! Component: 150 - total flux cleaned = 0.002782 Jy ! Component: 200 - total flux cleaned = 0.00302582 Jy ! Total flux subtracted in 200 components = 0.00302582 Jy ! Clean residual min=-0.004480 max=0.004023 Jy/beam ! Clean residual mean=-0.000003 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.181974 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.181974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198400Jy sigma=0.001165 ! Fit after self-cal, rms=0.198368Jy sigma=0.001165 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198368Jy sigma=0.001165 ! Fit after self-cal, rms=0.202251Jy sigma=0.001164 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202251Jy sigma=0.001164 ! Fit after self-cal, rms=0.202239Jy sigma=0.001164 ! Inverting map and beam ! Estimated beam: bmin=0.8333 mas, bmaj=2.135 mas, bpa=5.124 degrees ! Estimated noise=1091.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266114 Jy ! Component: 100 - total flux cleaned = 0.00384934 Jy ! Component: 150 - total flux cleaned = 0.0041502 Jy ! Component: 200 - total flux cleaned = 0.00433712 Jy ! Total flux subtracted in 200 components = 0.00433712 Jy ! Clean residual min=-0.004397 max=0.003962 Jy/beam ! Clean residual mean=0.000003 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.186311 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.186311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202211Jy sigma=0.001164 ! Fit after self-cal, rms=0.202199Jy sigma=0.001164 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=8.237 mas, bpa=12.19 degrees ! Estimated noise=1412.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892898 Jy ! Component: 100 - total flux cleaned = 0.000988458 Jy ! Component: 150 - total flux cleaned = 0.00104411 Jy ! Component: 200 - total flux cleaned = 0.0010952 Jy ! Total flux subtracted in 200 components = 0.0010952 Jy ! Clean residual min=-0.004438 max=0.003870 Jy/beam ! Clean residual mean=0.000009 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.187406 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 96 components and 0.187406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202200Jy sigma=0.001164 ! Fit after self-cal, rms=0.202192Jy sigma=0.001164 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6425 mas, bmaj=1.615 mas, bpa=3.125 degrees ! Estimated noise=1829.61 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.110169 Jy ! Component: 100 - total flux cleaned = 0.140791 Jy ! Component: 150 - total flux cleaned = 0.156727 Jy ! Component: 200 - total flux cleaned = 0.166701 Jy ! Total flux subtracted in 200 components = 0.166701 Jy ! Clean residual min=-0.008291 max=0.009247 Jy/beam ! Clean residual mean=-0.000012 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 0.166701 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.166701 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8333 mas, bmaj=2.135 mas, bpa=5.124 degrees ! Estimated noise=1091.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -0.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107751 Jy ! Component: 100 - total flux cleaned = 0.0158982 Jy ! Component: 150 - total flux cleaned = 0.019064 Jy ! Component: 200 - total flux cleaned = 0.0211136 Jy ! Total flux subtracted in 200 components = 0.0211136 Jy ! Clean residual min=-0.004557 max=0.003826 Jy/beam ! Clean residual mean=0.000000 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.187815 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 76 components and 0.187815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=8.237 mas, bpa=12.19 degrees ! Estimated noise=1412.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177724 Jy ! Component: 100 - total flux cleaned = 0.0024792 Jy ! Component: 150 - total flux cleaned = 0.00253414 Jy ! Component: 200 - total flux cleaned = 0.00253466 Jy ! Total flux subtracted in 200 components = 0.00253466 Jy ! Clean residual min=-0.004614 max=0.003460 Jy/beam ! Clean residual mean=0.000010 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.19035 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.19035 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8333 mas, bmaj=2.135 mas, bpa=5.124 degrees ! Estimated noise=1091.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000645183 Jy ! Component: 100 - total flux cleaned = -0.000692112 Jy ! Component: 150 - total flux cleaned = -0.000612179 Jy ! Component: 200 - total flux cleaned = -0.000613725 Jy ! Total flux subtracted in 200 components = -0.000613725 Jy ! Clean residual min=-0.004433 max=0.003781 Jy/beam ! Clean residual mean=0.000005 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.189736 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 0.189736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202183Jy sigma=0.001164 ! Fit after self-cal, rms=0.202184Jy sigma=0.001164 wmodel J2248-3235_X_2002_01_31_yyk\_map.mod ! Writing 100 model components to file: J2248-3235_X_2002_01_31_yyk_map.mod wobs J2248-3235_X_2002_01_31_yyk\_uvs.fits ! Applying 81 buffered edits. ! Writing UV FITS file: J2248-3235_X_2002_01_31_yyk_uvs.fits wwins J2248-3235_X_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J2248-3235_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199011 Jy ! Component: 100 - total flux cleaned = -0.00295469 Jy ! Component: 150 - total flux cleaned = -0.0035829 Jy ! Component: 200 - total flux cleaned = -0.00376213 Jy ! Component: 250 - total flux cleaned = -0.00353908 Jy ! Component: 300 - total flux cleaned = -0.00343345 Jy ! Component: 350 - total flux cleaned = -0.00317682 Jy ! Component: 400 - total flux cleaned = -0.00293059 Jy ! Component: 450 - total flux cleaned = -0.00273862 Jy ! Component: 500 - total flux cleaned = -0.00250473 Jy ! Component: 550 - total flux cleaned = -0.00223127 Jy ! Component: 600 - total flux cleaned = -0.00209813 Jy ! Component: 650 - total flux cleaned = -0.00183737 Jy ! Component: 700 - total flux cleaned = -0.00171059 Jy ! Component: 750 - total flux cleaned = -0.00154501 Jy ! Component: 800 - total flux cleaned = -0.00142437 Jy ! Component: 850 - total flux cleaned = -0.00146434 Jy ! Component: 900 - total flux cleaned = -0.00138665 Jy ! Component: 950 - total flux cleaned = -0.00134821 Jy ! Component: 1000 - total flux cleaned = -0.00146074 Jy ! Component: 1050 - total flux cleaned = -0.00157112 Jy ! Component: 1100 - total flux cleaned = -0.00160739 Jy ! Component: 1150 - total flux cleaned = -0.00167939 Jy ! Component: 1200 - total flux cleaned = -0.00189016 Jy ! Component: 1250 - total flux cleaned = -0.00199406 Jy ! Component: 1300 - total flux cleaned = -0.0021642 Jy ! Component: 1350 - total flux cleaned = -0.00219674 Jy ! Component: 1400 - total flux cleaned = -0.00216284 Jy ! Component: 1450 - total flux cleaned = -0.00212998 Jy ! Component: 1500 - total flux cleaned = -0.00212943 Jy ! Component: 1550 - total flux cleaned = -0.0020975 Jy ! Component: 1600 - total flux cleaned = -0.0020669 Jy ! Component: 1650 - total flux cleaned = -0.00212906 Jy ! Component: 1700 - total flux cleaned = -0.00203766 Jy ! Component: 1750 - total flux cleaned = -0.00203835 Jy ! Component: 1800 - total flux cleaned = -0.0019788 Jy ! Component: 1850 - total flux cleaned = -0.00180219 Jy ! Component: 1900 - total flux cleaned = -0.00174451 Jy ! Component: 1950 - total flux cleaned = -0.00160032 Jy ! Component: 2000 - total flux cleaned = -0.00157185 Jy ! Total flux subtracted in 2048 components = -0.0015718 Jy ! Clean residual min=-0.001683 max=0.001750 Jy/beam ! Clean residual mean=0.000007 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.188164 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 228 components and 0.188164 Jy ![Exited script file: muppet] wmap "J2248-3235_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8333 x 2.135 at 5.124 degrees (North through East) ! Clean map min=-0.0032148 max=0.13029 Jy/beam ! Writing clean map to FITS file: J2248-3235_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130287 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00052857 device "J2248-3235_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J2248-3235_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21709 1.21709 2.43418 4.86836 9.73672 19.4734 38.9469 77.8938 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8333 x 2.135 at 5.124 degrees (North through East) ! Clean map min=-0.0032148 max=0.13029 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2248-3235_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J2248-3235_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2248-3235_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 11:05:31 2007