! Started logfile: J2214-3835_S_2002_05_14_yyk_uvs.log on Tue Jun 26 23:21:34 2007 obs J2214-3835_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J2214-3835_S_2002_05_14_yyk_uva.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.754955 visibilities/baseline/integration-bin. ! Found source: J2214-3835 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 5028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2214-3835_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.529599 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.076 mas, bmaj=7.227 mas, bpa=-5.586 degrees ! Estimated noise=3588.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.297929 Jy ! Component: 100 - total flux cleaned = 0.40757 Jy ! Total flux subtracted in 100 components = 0.40757 Jy ! Clean residual min=-0.043090 max=0.078496 Jy/beam ! Clean residual mean=0.001430 rms=0.020462 Jy/beam ! Combined flux in latest and established models = 0.40757 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.40757 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.376364Jy sigma=0.001913 ! Fit after self-cal, rms=0.376094Jy sigma=0.001911 ! Inverting map and beam ! Estimated beam: bmin=2.076 mas, bmaj=7.227 mas, bpa=-5.586 degrees ! Estimated noise=3588.63 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=8.092 mas, bpa=-5.108 degrees ! Estimated noise=1974.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.121598 Jy ! Component: 100 - total flux cleaned = 0.166947 Jy ! Component: 150 - total flux cleaned = 0.183651 Jy ! Component: 200 - total flux cleaned = 0.184484 Jy ! Total flux subtracted in 200 components = 0.184484 Jy ! Clean residual min=-0.061082 max=0.121464 Jy/beam ! Clean residual mean=0.002490 rms=0.030571 Jy/beam ! Combined flux in latest and established models = 0.592054 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.592054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370246Jy sigma=0.001774 ! Fit after self-cal, rms=0.369833Jy sigma=0.001772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 8.092 at -5.108 degrees (North through East) ! Clean map min=-0.062492 max=0.31459 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.782756 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 3.47 KP 1.09 ! LA 0.68 NL 1.38 OV 1.40 PT 0.93 ! SC 1.05 MK 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.545193 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.76 HN 3.92 KP 1.00* ! LA 0.65 NL 1.59 OV 1.65 PT 0.94 ! SC 1.05 MK 5.78 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.609449 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.76 HN 4.84 KP 1.18 ! LA 0.75 NL 1.64 OV 1.53 PT 1.07 ! SC 1.03 MK 2.61 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.527682 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.69 HN 4.44 KP 1.30 ! LA 0.57 NL 1.56 OV 1.38 PT 0.95 ! SC 1.05 MK 6.01 ! ! ! Fit before self-cal, rms=0.369833Jy sigma=0.001772 ! Fit after self-cal, rms=0.618287Jy sigma=0.005184 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.618287Jy sigma=0.005184 ! Fit after self-cal, rms=0.619269Jy sigma=0.005179 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=13.25 mas, bpa=12.49 degrees ! Estimated noise=736.038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.30665 Jy ! Component: 100 - total flux cleaned = -0.37174 Jy ! Component: 150 - total flux cleaned = -0.387867 Jy ! Component: 200 - total flux cleaned = -0.391924 Jy ! Total flux subtracted in 200 components = -0.391924 Jy ! Clean residual min=-0.014428 max=0.022290 Jy/beam ! Clean residual mean=0.000296 rms=0.006751 Jy/beam ! Combined flux in latest and established models = 0.20013 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 71 components and 0.20013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570253Jy sigma=0.001645 ! Fit after self-cal, rms=0.570072Jy sigma=0.001644 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570072Jy sigma=0.001644 ! Fit after self-cal, rms=0.569758Jy sigma=0.001637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514259 Jy ! Component: 100 - total flux cleaned = -0.000520128 Jy ! Component: 150 - total flux cleaned = -0.000510885 Jy ! Component: 200 - total flux cleaned = -0.000503663 Jy ! Total flux subtracted in 200 components = -0.000503663 Jy ! Clean residual min=-0.014441 max=0.022135 Jy/beam ! Clean residual mean=0.000305 rms=0.006751 Jy/beam ! Combined flux in latest and established models = 0.199626 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 74 components and 0.199626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569715Jy sigma=0.001637 ! Fit after self-cal, rms=0.569126Jy sigma=0.001636 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.967 x 13.25 at 12.49 degrees (North through East) ! Clean map min=-0.014215 max=0.14157 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569126Jy sigma=0.001636 ! Fit after self-cal, rms=0.522897Jy sigma=0.001442 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.522897Jy sigma=0.001442 ! Fit after self-cal, rms=0.522704Jy sigma=0.001442 ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=16.88 mas, bpa=15.44 degrees ! Estimated noise=708.136 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299603 Jy ! Component: 100 - total flux cleaned = -0.000300939 Jy ! Component: 150 - total flux cleaned = -0.000341974 Jy ! Component: 200 - total flux cleaned = -0.000343877 Jy ! Total flux subtracted in 200 components = -0.000343877 Jy ! Clean residual min=-0.015452 max=0.025432 Jy/beam ! Clean residual mean=0.000451 rms=0.007086 Jy/beam ! Combined flux in latest and established models = 0.199282 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 77 components and 0.199282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.522630Jy sigma=0.001441 ! Fit after self-cal, rms=0.522554Jy sigma=0.001441 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.522554Jy sigma=0.001441 ! Fit after self-cal, rms=0.923041Jy sigma=0.001440 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.923041Jy sigma=0.001440 ! Fit after self-cal, rms=0.923487Jy sigma=0.001440 ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=16.92 mas, bpa=15.44 degrees ! Estimated noise=708.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.74572e-05 Jy ! Component: 100 - total flux cleaned = -7.01835e-05 Jy ! Component: 150 - total flux cleaned = -7.46911e-05 Jy ! Component: 200 - total flux cleaned = -0.000108761 Jy ! Total flux subtracted in 200 components = -0.000108761 Jy ! Clean residual min=-0.015393 max=0.025346 Jy/beam ! Clean residual mean=0.000447 rms=0.007065 Jy/beam ! Combined flux in latest and established models = 0.199173 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 77 components and 0.199173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.923457Jy sigma=0.001439 ! Fit after self-cal, rms=0.922988Jy sigma=0.001439 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.94 mas, bmaj=44.67 mas, bpa=6.732 degrees ! Estimated noise=815.739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732558 Jy ! Component: 100 - total flux cleaned = 0.000734676 Jy ! Component: 150 - total flux cleaned = 0.000733426 Jy ! Component: 200 - total flux cleaned = 0.000731 Jy ! Total flux subtracted in 200 components = 0.000731001 Jy ! Clean residual min=-0.020319 max=0.028296 Jy/beam ! Clean residual mean=0.000615 rms=0.009486 Jy/beam ! Combined flux in latest and established models = 0.199904 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 79 components and 0.199904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.922983Jy sigma=0.001439 ! Fit after self-cal, rms=0.923454Jy sigma=0.001439 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=8.483 mas, bpa=5.722 degrees ! Estimated noise=1989.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.13706 Jy ! Component: 100 - total flux cleaned = 0.176759 Jy ! Component: 150 - total flux cleaned = 0.190835 Jy ! Component: 200 - total flux cleaned = 0.19217 Jy ! Total flux subtracted in 200 components = 0.19217 Jy ! Clean residual min=-0.020501 max=0.031958 Jy/beam ! Clean residual mean=0.000326 rms=0.007616 Jy/beam ! Combined flux in latest and established models = 0.19217 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.19217 Jy ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=16.92 mas, bpa=15.44 degrees ! Estimated noise=708.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.003469 Jy ! Component: 100 - total flux cleaned = 0.00346818 Jy ! Component: 150 - total flux cleaned = 0.00346672 Jy ! Component: 200 - total flux cleaned = 0.00341875 Jy ! Total flux subtracted in 200 components = 0.00341875 Jy ! Clean residual min=-0.015872 max=0.026385 Jy/beam ! Clean residual mean=0.000485 rms=0.007285 Jy/beam ! Combined flux in latest and established models = 0.195589 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 0.195589 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.94 mas, bmaj=44.67 mas, bpa=6.732 degrees ! Estimated noise=815.739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177878 Jy ! Component: 100 - total flux cleaned = 0.0017725 Jy ! Component: 150 - total flux cleaned = 0.00176999 Jy ! Component: 200 - total flux cleaned = 0.00176822 Jy ! Total flux subtracted in 200 components = 0.00176822 Jy ! Clean residual min=-0.020913 max=0.029355 Jy/beam ! Clean residual mean=0.000659 rms=0.009680 Jy/beam ! Combined flux in latest and established models = 0.197357 Jy ! Adding 2 model components to the UV plane model. ! The established model now contains 31 components and 0.197357 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=16.92 mas, bpa=15.44 degrees ! Estimated noise=708.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167201 Jy ! Component: 100 - total flux cleaned = -0.00159166 Jy ! Component: 150 - total flux cleaned = -0.00159713 Jy ! Component: 200 - total flux cleaned = -0.00155955 Jy ! Total flux subtracted in 200 components = -0.00155955 Jy ! Clean residual min=-0.015760 max=0.026414 Jy/beam ! Clean residual mean=0.000483 rms=0.007251 Jy/beam ! Combined flux in latest and established models = 0.195797 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.195797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.923953Jy sigma=0.001445 ! Fit after self-cal, rms=0.923976Jy sigma=0.001445 wmodel J2214-3835_S_2002_05_14_yyk\_map.mod ! Writing 35 model components to file: J2214-3835_S_2002_05_14_yyk_map.mod wobs J2214-3835_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J2214-3835_S_2002_05_14_yyk_uvs.fits wwins J2214-3835_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J2214-3835_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105316 Jy ! Component: 100 - total flux cleaned = 0.0180677 Jy ! Component: 150 - total flux cleaned = 0.0243106 Jy ! Component: 200 - total flux cleaned = 0.0295851 Jy ! Component: 250 - total flux cleaned = 0.0329767 Jy ! Component: 300 - total flux cleaned = 0.0353894 Jy ! Component: 350 - total flux cleaned = 0.0380016 Jy ! Component: 400 - total flux cleaned = 0.0399665 Jy ! Component: 450 - total flux cleaned = 0.0412096 Jy ! Component: 500 - total flux cleaned = 0.0420994 Jy ! Component: 550 - total flux cleaned = 0.0430923 Jy ! Component: 600 - total flux cleaned = 0.0437703 Jy ! Component: 650 - total flux cleaned = 0.0440335 Jy ! Component: 700 - total flux cleaned = 0.0442907 Jy ! Component: 750 - total flux cleaned = 0.0447838 Jy ! Component: 800 - total flux cleaned = 0.0450245 Jy ! Component: 850 - total flux cleaned = 0.0453762 Jy ! Component: 900 - total flux cleaned = 0.04572 Jy ! Component: 950 - total flux cleaned = 0.0462825 Jy ! Component: 1000 - total flux cleaned = 0.0468341 Jy ! Component: 1050 - total flux cleaned = 0.0473773 Jy ! Component: 1100 - total flux cleaned = 0.0478044 Jy ! Component: 1150 - total flux cleaned = 0.0482259 Jy ! Component: 1200 - total flux cleaned = 0.048744 Jy ! Component: 1250 - total flux cleaned = 0.04905 Jy ! Component: 1300 - total flux cleaned = 0.0494529 Jy ! Component: 1350 - total flux cleaned = 0.0496516 Jy ! Component: 1400 - total flux cleaned = 0.04975 Jy ! Component: 1450 - total flux cleaned = 0.0501394 Jy ! Component: 1500 - total flux cleaned = 0.0504266 Jy ! Component: 1550 - total flux cleaned = 0.0506167 Jy ! Component: 1600 - total flux cleaned = 0.0508045 Jy ! Component: 1650 - total flux cleaned = 0.0510841 Jy ! Component: 1700 - total flux cleaned = 0.0511773 Jy ! Component: 1750 - total flux cleaned = 0.0509023 Jy ! Component: 1800 - total flux cleaned = 0.0505382 Jy ! Component: 1850 - total flux cleaned = 0.0503569 Jy ! Component: 1900 - total flux cleaned = 0.0502657 Jy ! Component: 1950 - total flux cleaned = 0.0500853 Jy ! Component: 2000 - total flux cleaned = 0.0498161 Jy ! Total flux subtracted in 2048 components = 0.0498167 Jy ! Clean residual min=-0.005644 max=0.004839 Jy/beam ! Clean residual mean=0.000008 rms=0.002459 Jy/beam ! Combined flux in latest and established models = 0.245614 Jy keep ! Adding 199 model components to the UV plane model. ! The established model now contains 234 components and 0.245614 Jy ![Exited script file: muppet] wmap "J2214-3835_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.122 x 16.92 at 15.44 degrees (North through East) ! Clean map min=-0.010879 max=0.16809 Jy/beam ! Writing clean map to FITS file: J2214-3835_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00240818 device "J2214-3835_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J2214-3835_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.2981 4.2981 8.59621 17.1924 34.3848 68.7697 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0072 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.122 x 16.92 at 15.44 degrees (North through East) ! Clean map min=-0.010879 max=0.16809 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2214-3835_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J2214-3835_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2214-3835_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 23:21:40 2007