! Started logfile: J2213-2529_S_2002_05_14_yyk_uvs.log on Tue Jun 26 23:21:09 2007 obs J2213-2529_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J2213-2529_S_2002_05_14_yyk_uva.fits ! AN table 1: 88 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.801515 visibilities/baseline/integration-bin. ! Found source: J2213-2529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 12696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2213-2529_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.454969 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=6.681 mas, bpa=0.4052 degrees ! Estimated noise=1549.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.311354 Jy ! Component: 100 - total flux cleaned = 0.401196 Jy ! Total flux subtracted in 100 components = 0.401196 Jy ! Clean residual min=-0.018616 max=0.060131 Jy/beam ! Clean residual mean=0.000227 rms=0.007084 Jy/beam ! Combined flux in latest and established models = 0.401196 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.401196 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.233790Jy sigma=0.001469 ! Fit after self-cal, rms=0.232827Jy sigma=0.001464 ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=6.681 mas, bpa=0.4068 degrees ! Estimated noise=1561.39 mJy/beam. ! Added new window around map position (5.5, 3.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0689644 Jy ! Component: 100 - total flux cleaned = 0.104043 Jy ! Total flux subtracted in 100 components = 0.104043 Jy ! Clean residual min=-0.014591 max=0.022138 Jy/beam ! Clean residual mean=0.000218 rms=0.004334 Jy/beam ! Combined flux in latest and established models = 0.505239 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.505239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212411Jy sigma=0.001306 ! Fit after self-cal, rms=0.210726Jy sigma=0.001297 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=7.981 mas, bpa=-0.7939 degrees ! Estimated noise=975.195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422482 Jy ! Component: 100 - total flux cleaned = 0.0635029 Jy ! Component: 150 - total flux cleaned = 0.0756545 Jy ! Component: 200 - total flux cleaned = 0.0826594 Jy ! Total flux subtracted in 200 components = 0.0826594 Jy ! Clean residual min=-0.012835 max=0.020096 Jy/beam ! Clean residual mean=0.000629 rms=0.004049 Jy/beam ! Combined flux in latest and established models = 0.587898 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 91 components and 0.587898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204918Jy sigma=0.001254 ! Fit after self-cal, rms=0.204344Jy sigma=0.001251 ! Inverting map ! Added new window around map position (12.5, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268168 Jy ! Component: 100 - total flux cleaned = 0.0376293 Jy ! Component: 150 - total flux cleaned = 0.0434019 Jy ! Component: 200 - total flux cleaned = 0.0451769 Jy ! Total flux subtracted in 200 components = 0.0451769 Jy ! Clean residual min=-0.010731 max=0.008457 Jy/beam ! Clean residual mean=0.000381 rms=0.002586 Jy/beam ! Combined flux in latest and established models = 0.633075 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 56 model components to the UV plane model. ! The established model now contains 144 components and 0.633075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201940Jy sigma=0.001234 ! Fit after self-cal, rms=0.201695Jy sigma=0.001232 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.99 x 7.981 at -0.7939 degrees (North through East) ! Clean map min=-0.008948 max=0.35097 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01378 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.11 HN 1.06 KP 0.94 ! LA 0.95 NL 0.93 OV 1.00 PT 1.05 ! SC 1.05 MK 0.92 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998145 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 1.09 KP 1.00* ! LA 0.94 NL 0.99 OV 1.04 PT 1.01 ! SC 0.98 MK 1.06 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.9576 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.19 KP 1.02 ! LA 0.99 NL 1.07 OV 1.07 PT 1.17 ! SC 0.97 MK 1.02 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01931 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.87 HN 1.09 KP 1.06 ! LA 0.83 NL 1.07 OV 0.98 PT 0.99 ! SC 0.93 MK 1.00 ! ! ! Fit before self-cal, rms=0.201695Jy sigma=0.001232 ! Fit after self-cal, rms=0.198229Jy sigma=0.001203 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198229Jy sigma=0.001203 ! Fit after self-cal, rms=0.198229Jy sigma=0.001203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=7.872 mas, bpa=-0.1657 degrees ! Estimated noise=971.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685571 Jy ! Component: 100 - total flux cleaned = 0.00806164 Jy ! Component: 150 - total flux cleaned = 0.00885875 Jy ! Component: 200 - total flux cleaned = 0.00940206 Jy ! Total flux subtracted in 200 components = 0.00940206 Jy ! Clean residual min=-0.003910 max=0.005862 Jy/beam ! Clean residual mean=0.000104 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.642477 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 0.642477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197982Jy sigma=0.001201 ! Fit after self-cal, rms=0.197957Jy sigma=0.001201 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197957Jy sigma=0.001201 ! Fit after self-cal, rms=0.196062Jy sigma=0.001189 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207121 Jy ! Component: 100 - total flux cleaned = 0.00242412 Jy ! Component: 150 - total flux cleaned = 0.00258213 Jy ! Component: 200 - total flux cleaned = 0.00272767 Jy ! Total flux subtracted in 200 components = 0.00272767 Jy ! Clean residual min=-0.003852 max=0.005268 Jy/beam ! Clean residual mean=0.000098 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.645204 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 183 components and 0.645205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195993Jy sigma=0.001188 ! Fit after self-cal, rms=0.195745Jy sigma=0.001187 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.001 x 7.872 at -0.1657 degrees (North through East) ! Clean map min=-0.0037683 max=0.35322 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195745Jy sigma=0.001187 ! Fit after self-cal, rms=0.201617Jy sigma=0.001176 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201617Jy sigma=0.001176 ! Fit after self-cal, rms=0.201571Jy sigma=0.001176 ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=7.869 mas, bpa=-0.3356 degrees ! Estimated noise=968.382 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254425 Jy ! Component: 100 - total flux cleaned = 0.00262583 Jy ! Component: 150 - total flux cleaned = 0.00255761 Jy ! Component: 200 - total flux cleaned = 0.00249432 Jy ! Total flux subtracted in 200 components = 0.00249432 Jy ! Clean residual min=-0.003132 max=0.004480 Jy/beam ! Clean residual mean=0.000074 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.647699 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 197 components and 0.647699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201500Jy sigma=0.001175 ! Fit after self-cal, rms=0.201485Jy sigma=0.001175 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201485Jy sigma=0.001175 ! Fit after self-cal, rms=0.201343Jy sigma=0.001172 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201343Jy sigma=0.001172 ! Fit after self-cal, rms=0.201338Jy sigma=0.001172 ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=7.865 mas, bpa=-0.3762 degrees ! Estimated noise=967.882 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190922 Jy ! Component: 100 - total flux cleaned = 0.00203996 Jy ! Component: 150 - total flux cleaned = 0.00210082 Jy ! Component: 200 - total flux cleaned = 0.00215468 Jy ! Total flux subtracted in 200 components = 0.00215468 Jy ! Clean residual min=-0.003086 max=0.004155 Jy/beam ! Clean residual mean=0.000067 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.649854 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 209 components and 0.649854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201299Jy sigma=0.001172 ! Fit after self-cal, rms=0.201297Jy sigma=0.001172 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=19.6 mas, bpa=7.023 degrees ! Estimated noise=1258.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175562 Jy ! Component: 100 - total flux cleaned = 0.00170414 Jy ! Component: 150 - total flux cleaned = 0.00157001 Jy ! Component: 200 - total flux cleaned = 0.00149148 Jy ! Total flux subtracted in 200 components = 0.00149148 Jy ! Clean residual min=-0.002570 max=0.004634 Jy/beam ! Clean residual mean=0.000107 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.651345 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 223 components and 0.651345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201307Jy sigma=0.001172 ! Fit after self-cal, rms=0.201304Jy sigma=0.001172 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.227 mas, bmaj=6.632 mas, bpa=0.4424 degrees ! Estimated noise=1559.45 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.308391 Jy ! Component: 100 - total flux cleaned = 0.412191 Jy ! Component: 150 - total flux cleaned = 0.46716 Jy ! Component: 200 - total flux cleaned = 0.503821 Jy ! Total flux subtracted in 200 components = 0.503821 Jy ! Clean residual min=-0.010258 max=0.015811 Jy/beam ! Clean residual mean=0.000144 rms=0.003625 Jy/beam ! Combined flux in latest and established models = 0.503821 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 63 model components to the UV plane model. ! The established model now contains 63 components and 0.503821 Jy ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=7.865 mas, bpa=-0.3762 degrees ! Estimated noise=967.882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484716 Jy ! Component: 100 - total flux cleaned = 0.0781535 Jy ! Component: 150 - total flux cleaned = 0.0981221 Jy ! Component: 200 - total flux cleaned = 0.112031 Jy ! Total flux subtracted in 200 components = 0.112031 Jy ! Clean residual min=-0.004469 max=0.007061 Jy/beam ! Clean residual mean=0.000238 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.615852 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 154 components and 0.615852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=19.6 mas, bpa=7.023 degrees ! Estimated noise=1258.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166491 Jy ! Component: 100 - total flux cleaned = 0.0250895 Jy ! Component: 150 - total flux cleaned = 0.0295173 Jy ! Component: 200 - total flux cleaned = 0.0318664 Jy ! Total flux subtracted in 200 components = 0.0318664 Jy ! Clean residual min=-0.002794 max=0.004141 Jy/beam ! Clean residual mean=0.000136 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.647718 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 200 components and 0.647719 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=7.865 mas, bpa=-0.3762 degrees ! Estimated noise=967.882 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000891192 Jy ! Component: 100 - total flux cleaned = -0.000535569 Jy ! Component: 150 - total flux cleaned = -0.000133687 Jy ! Component: 200 - total flux cleaned = -4.41455e-05 Jy ! Total flux subtracted in 200 components = -4.41455e-05 Jy ! Clean residual min=-0.003632 max=0.004491 Jy/beam ! Clean residual mean=0.000073 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.647674 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 215 components and 0.647674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201379Jy sigma=0.001172 ! Fit after self-cal, rms=0.201346Jy sigma=0.001172 wmodel J2213-2529_S_2002_05_14_yyk\_map.mod ! Writing 215 model components to file: J2213-2529_S_2002_05_14_yyk_map.mod wobs J2213-2529_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J2213-2529_S_2002_05_14_yyk_uvs.fits wwins J2213-2529_S_2002_05_14_yyk\_map.win ! wwins: Wrote 3 windows to J2213-2529_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181528 Jy ! Component: 100 - total flux cleaned = 0.00312915 Jy ! Component: 150 - total flux cleaned = 0.00435359 Jy ! Component: 200 - total flux cleaned = 0.00510809 Jy ! Component: 250 - total flux cleaned = 0.0058301 Jy ! Component: 300 - total flux cleaned = 0.00620184 Jy ! Component: 350 - total flux cleaned = 0.00640685 Jy ! Component: 400 - total flux cleaned = 0.00650629 Jy ! Component: 450 - total flux cleaned = 0.00665214 Jy ! Component: 500 - total flux cleaned = 0.00693392 Jy ! Component: 550 - total flux cleaned = 0.00697935 Jy ! Component: 600 - total flux cleaned = 0.00706926 Jy ! Component: 650 - total flux cleaned = 0.00719924 Jy ! Component: 700 - total flux cleaned = 0.00715603 Jy ! Component: 750 - total flux cleaned = 0.00728168 Jy ! Component: 800 - total flux cleaned = 0.00744495 Jy ! Component: 850 - total flux cleaned = 0.00772383 Jy ! Component: 900 - total flux cleaned = 0.00788022 Jy ! Component: 950 - total flux cleaned = 0.00818794 Jy ! Component: 1000 - total flux cleaned = 0.0084152 Jy ! Component: 1050 - total flux cleaned = 0.00863964 Jy ! Component: 1100 - total flux cleaned = 0.0089349 Jy ! Component: 1150 - total flux cleaned = 0.00904424 Jy ! Component: 1200 - total flux cleaned = 0.00922406 Jy ! Component: 1250 - total flux cleaned = 0.00954326 Jy ! Component: 1300 - total flux cleaned = 0.00978706 Jy ! Component: 1350 - total flux cleaned = 0.0099588 Jy ! Component: 1400 - total flux cleaned = 0.010197 Jy ! Component: 1450 - total flux cleaned = 0.010432 Jy ! Component: 1500 - total flux cleaned = 0.010631 Jy ! Component: 1550 - total flux cleaned = 0.0108277 Jy ! Component: 1600 - total flux cleaned = 0.0110544 Jy ! Component: 1650 - total flux cleaned = 0.0113423 Jy ! Component: 1700 - total flux cleaned = 0.0114691 Jy ! Component: 1750 - total flux cleaned = 0.0117502 Jy ! Component: 1800 - total flux cleaned = 0.0119968 Jy ! Component: 1850 - total flux cleaned = 0.0121794 Jy ! Component: 1900 - total flux cleaned = 0.0123007 Jy ! Component: 1950 - total flux cleaned = 0.01266 Jy ! Component: 2000 - total flux cleaned = 0.012897 Jy ! Total flux subtracted in 2048 components = 0.0131319 Jy ! Clean residual min=-0.001632 max=0.001785 Jy/beam ! Clean residual mean=0.000032 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.660806 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 336 components and 0.660806 Jy ![Exited script file: muppet] wmap "J2213-2529_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.997 x 7.865 at -0.3762 degrees (North through East) ! Clean map min=-0.0027695 max=0.35154 Jy/beam ! Writing clean map to FITS file: J2213-2529_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.35154 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000590634 device "J2213-2529_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J2213-2529_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.50404 0.50404 1.00808 2.01616 4.03232 8.06464 16.1293 32.2586 64.5171 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.351 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.997 x 7.865 at -0.3762 degrees (North through East) ! Clean map min=-0.0027695 max=0.35154 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2213-2529_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J2213-2529_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2213-2529_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 23:21:18 2007