! Started logfile: J2118-3019_X_2002_01_31_yyk_uvs.log on Wed Jun 27 11:04:27 2007
obs J2118-3019_X_2002_01_31_yyk_uva.fits
! Reading UV FITS file: J2118-3019_X_2002_01_31_yyk_uva.fits
! AN table 1: 82 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.115447 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2118-3019
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40947e+09        8e+06          1        8e+06
!  02        2  8.47947e+09        8e+06          1        8e+06
!  03        3  8.79447e+09        8e+06          1        8e+06
!  04        4  8.89947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1545 lines of history.
! 
! Reading 1704 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
flag NL
! Flagging baselines of antenna 1:NL in the currently selected channels.
![@muppet J2118-3019_X_2002_01_31_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.464111 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=13.33 mas, bpa=10.54 degrees
! Estimated noise=3056.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185913 Jy
! Component: 100  -  total flux cleaned = 0.0197682 Jy
! Total flux subtracted in 100 components = 0.0197682 Jy
! Clean residual min=-0.009334 max=0.009281 Jy/beam
! Clean residual mean=0.000090 rms=0.004010 Jy/beam
! Combined flux in latest and established models = 0.0197682 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.0197682 Jy
! 
! Correcting IF 1.
!  A total of 514 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 530 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 578 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 514 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.461600Jy  sigma=0.002356
! Fit after  self-cal, rms=0.460863Jy  sigma=0.002350
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=13.33 mas, bpa=10.54 degrees
! Estimated noise=3056.05 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.758 mas, bmaj=13.95 mas, bpa=12.37 degrees
! Estimated noise=2924.89 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00957672 Jy
! Component: 100  -  total flux cleaned = 0.0170397 Jy
! Component: 150  -  total flux cleaned = 0.0192578 Jy
! Component: 200  -  total flux cleaned = 0.0179455 Jy
! Total flux subtracted in 200 components = 0.0179455 Jy
! Clean residual min=-0.005091 max=0.005120 Jy/beam
! Clean residual mean=0.000003 rms=0.002443 Jy/beam
! Combined flux in latest and established models = 0.0377137 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 72 model components to the UV plane model.
! The established model now contains 110 components and 0.0377137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.459456Jy  sigma=0.002340
! Fit after  self-cal, rms=0.459345Jy  sigma=0.002340
! Inverting map 
! Added new window around map position (22.4, -9.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157424 Jy
! Component: 100  -  total flux cleaned = -0.00274329 Jy
! Component: 150  -  total flux cleaned = -0.00348233 Jy
! Component: 200  -  total flux cleaned = -0.00594936 Jy
! Total flux subtracted in 200 components = -0.00594936 Jy
! Clean residual min=-0.009568 max=0.008316 Jy/beam
! Clean residual mean=-0.000060 rms=0.003045 Jy/beam
! Combined flux in latest and established models = 0.0317643 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 47 model components to the UV plane model.
! The established model now contains 157 components and 0.0317643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.458708Jy  sigma=0.002337
! Fit after  self-cal, rms=0.458476Jy  sigma=0.002336
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.758 x 13.95 at 12.37 degrees (North through East)
! Clean map  min=-0.014338  max=0.033983 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 114 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.458476Jy  sigma=0.002336
! Fit after  self-cal, rms=0.446760Jy  sigma=0.002422
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.446760Jy  sigma=0.002422
! Fit after  self-cal, rms=0.446616Jy  sigma=0.002421
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.695 mas, bmaj=14.47 mas, bpa=12.49 degrees
! Estimated noise=3170.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219474 Jy
! Component: 100  -  total flux cleaned = 0.00116055 Jy
! Component: 150  -  total flux cleaned = 0.00351682 Jy
! Component: 200  -  total flux cleaned = 0.00618527 Jy
! Total flux subtracted in 200 components = 0.00618527 Jy
! Clean residual min=-0.011421 max=0.010207 Jy/beam
! Clean residual mean=-0.000081 rms=0.003129 Jy/beam
! Combined flux in latest and established models = 0.0379496 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 205 components and 0.0379496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.445929Jy  sigma=0.002418
! Fit after  self-cal, rms=0.445957Jy  sigma=0.002419
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.445957Jy  sigma=0.002419
! Fit after  self-cal, rms=0.442410Jy  sigma=0.002394
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111206 Jy
! Component: 100  -  total flux cleaned = 0.0120246 Jy
! Component: 150  -  total flux cleaned = 0.0112577 Jy
! Component: 200  -  total flux cleaned = 0.00849945 Jy
! Total flux subtracted in 200 components = 0.00849945 Jy
! Clean residual min=-0.014821 max=0.015741 Jy/beam
! Clean residual mean=-0.000118 rms=0.005300 Jy/beam
! Combined flux in latest and established models = 0.0464491 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 245 components and 0.0464491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.440784Jy  sigma=0.002386
! Fit after  self-cal, rms=0.439521Jy  sigma=0.002378
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.695 x 14.47 at 12.49 degrees (North through East)
! Clean map  min=-0.025369  max=0.051966 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.849 mas, bmaj=14.31 mas, bpa=12.01 degrees
! Estimated noise=3197.84 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00563833 Jy
! Component: 100  -  total flux cleaned = -0.00939992 Jy
! Component: 150  -  total flux cleaned = -0.0106264 Jy
! Component: 200  -  total flux cleaned = -0.0109719 Jy
! Total flux subtracted in 200 components = -0.0109719 Jy
! Clean residual min=-0.012238 max=0.013126 Jy/beam
! Clean residual mean=-0.000174 rms=0.005028 Jy/beam
! Combined flux in latest and established models = 0.0354772 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 68 model components to the UV plane model.
! The established model now contains 300 components and 0.0354772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.438714Jy  sigma=0.002375
! Fit after  self-cal, rms=0.437963Jy  sigma=0.002371
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.948 mas, bmaj=13.33 mas, bpa=10.48 degrees
! Estimated noise=3342.11 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148867 Jy
! Component: 100  -  total flux cleaned = 0.0223453 Jy
! Component: 150  -  total flux cleaned = 0.0249559 Jy
! Component: 200  -  total flux cleaned = 0.0240015 Jy
! Total flux subtracted in 200 components = 0.0240015 Jy
! Clean residual min=-0.031002 max=0.032591 Jy/beam
! Clean residual mean=-0.000172 rms=0.011336 Jy/beam
! Combined flux in latest and established models = 0.0240015 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 68 model components to the UV plane model.
! The established model now contains 68 components and 0.0240015 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.695 mas, bmaj=14.47 mas, bpa=12.49 degrees
! Estimated noise=3170.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00758025 Jy
! Component: 100  -  total flux cleaned = 0.0138911 Jy
! Component: 150  -  total flux cleaned = 0.0165361 Jy
! Component: 200  -  total flux cleaned = 0.0239125 Jy
! Total flux subtracted in 200 components = 0.0239125 Jy
! Clean residual min=-0.024424 max=0.025535 Jy/beam
! Clean residual mean=-0.000195 rms=0.009584 Jy/beam
! Combined flux in latest and established models = 0.047914 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 113 components and 0.047914 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.849 mas, bmaj=14.31 mas, bpa=12.01 degrees
! Estimated noise=3197.84 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0054071 Jy
! Component: 100  -  total flux cleaned = 0.0106041 Jy
! Component: 150  -  total flux cleaned = 0.0151171 Jy
! Component: 200  -  total flux cleaned = 0.0193783 Jy
! Total flux subtracted in 200 components = 0.0193783 Jy
! Clean residual min=-0.021323 max=0.023377 Jy/beam
! Clean residual mean=-0.000229 rms=0.008675 Jy/beam
! Combined flux in latest and established models = 0.0672923 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 147 components and 0.0672923 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.695 mas, bmaj=14.47 mas, bpa=12.49 degrees
! Estimated noise=3170.12 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135423 Jy
! Component: 100  -  total flux cleaned = 0.00496724 Jy
! Component: 150  -  total flux cleaned = 0.00843307 Jy
! Component: 200  -  total flux cleaned = 0.0111387 Jy
! Total flux subtracted in 200 components = 0.0111387 Jy
! Clean residual min=-0.023167 max=0.023075 Jy/beam
! Clean residual mean=-0.000198 rms=0.008441 Jy/beam
! Combined flux in latest and established models = 0.078431 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 176 components and 0.078431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.439570Jy  sigma=0.002384
! Fit after  self-cal, rms=0.438103Jy  sigma=0.002376
wmodel J2118-3019_X_2002_01_31_yyk\_map.mod
! Writing 176 model components to file: J2118-3019_X_2002_01_31_yyk_map.mod
wobs J2118-3019_X_2002_01_31_yyk\_uvs.fits
! Applying 82 buffered edits.
! Writing UV FITS file: J2118-3019_X_2002_01_31_yyk_uvs.fits
wwins J2118-3019_X_2002_01_31_yyk\_map.win
! wwins: Wrote 1 windows to J2118-3019_X_2002_01_31_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260182 Jy
! Component: 100  -  total flux cleaned = 0.000307163 Jy
! Component: 150  -  total flux cleaned = 0.000580337 Jy
! Component: 200  -  total flux cleaned = 0.00132676 Jy
! Component: 250  -  total flux cleaned = 0.00317306 Jy
! Component: 300  -  total flux cleaned = 0.00486927 Jy
! Component: 350  -  total flux cleaned = 0.0050697 Jy
! Component: 400  -  total flux cleaned = 0.00507315 Jy
! Component: 450  -  total flux cleaned = 0.00489276 Jy
! Component: 500  -  total flux cleaned = 0.00471475 Jy
! Component: 550  -  total flux cleaned = 0.00454254 Jy
! Component: 600  -  total flux cleaned = 0.00470692 Jy
! Component: 650  -  total flux cleaned = 0.00502584 Jy
! Component: 700  -  total flux cleaned = 0.0051809 Jy
! Component: 750  -  total flux cleaned = 0.00562193 Jy
! Component: 800  -  total flux cleaned = 0.00590766 Jy
! Component: 850  -  total flux cleaned = 0.00646111 Jy
! Component: 900  -  total flux cleaned = 0.0072691 Jy
! Component: 950  -  total flux cleaned = 0.00779426 Jy
! Component: 1000  -  total flux cleaned = 0.00869467 Jy
! Component: 1050  -  total flux cleaned = 0.0100846 Jy
! Component: 1100  -  total flux cleaned = 0.0115836 Jy
! Component: 1150  -  total flux cleaned = 0.0124511 Jy
! Component: 1200  -  total flux cleaned = 0.0130662 Jy
! Component: 1250  -  total flux cleaned = 0.0134346 Jy
! Component: 1300  -  total flux cleaned = 0.0140495 Jy
! Component: 1350  -  total flux cleaned = 0.0150355 Jy
! Component: 1400  -  total flux cleaned = 0.015902 Jy
! Component: 1450  -  total flux cleaned = 0.0166481 Jy
! Component: 1500  -  total flux cleaned = 0.0173969 Jy
! Component: 1550  -  total flux cleaned = 0.0182743 Jy
! Component: 1600  -  total flux cleaned = 0.0190289 Jy
! Component: 1650  -  total flux cleaned = 0.0196612 Jy
! Component: 1700  -  total flux cleaned = 0.0197897 Jy
! Component: 1750  -  total flux cleaned = 0.0199183 Jy
! Component: 1800  -  total flux cleaned = 0.019918 Jy
! Component: 1850  -  total flux cleaned = 0.0199177 Jy
! Component: 1900  -  total flux cleaned = 0.0199187 Jy
! Component: 1950  -  total flux cleaned = 0.0197833 Jy
! Component: 2000  -  total flux cleaned = 0.0197828 Jy
! Total flux subtracted in 2048 components = 0.0196446 Jy
! Clean residual min=-0.007511 max=0.007260 Jy/beam
! Clean residual mean=-0.000102 rms=0.003038 Jy/beam
! Combined flux in latest and established models = 0.0980756 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 306 components and 0.0980756 Jy
![Exited script file: muppet]
wmap "J2118-3019_X_2002_01_31_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.695 x 14.47 at 12.49 degrees (North through East)
! Clean map  min=-0.04787  max=0.055727 Jy/beam
! Writing clean map to FITS file: J2118-3019_X_2002_01_31_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0557271 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00360583 
device "J2118-3019_X_2002_01_31_yyk\_map.eps/VPS"
! Attempting to open device: 'J2118-3019_X_2002_01_31_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -19.4115 19.4115 38.8231 77.6461
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0108 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.055 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.695 x 14.47 at 12.49 degrees (North through East)
! Clean map  min=-0.04787  max=0.055727 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2118-3019_X_2002_01_31_yyk\_map.gif/gif"
! Attempting to open device: 'J2118-3019_X_2002_01_31_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2118-3019_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 11:04:35 2007