! Started logfile: J2109-4110_S_2002_05_14_yyk_uvs.log on Tue Jun 26 23:15:40 2007 obs J2109-4110_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J2109-4110_S_2002_05_14_yyk_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 1344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2109-4110_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.14553 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=6.706 mas, bpa=-5.95 degrees ! Estimated noise=5780.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.875115 Jy ! Component: 100 - total flux cleaned = 1.12296 Jy ! Total flux subtracted in 100 components = 1.12296 Jy ! Clean residual min=-0.088065 max=0.114449 Jy/beam ! Clean residual mean=0.002260 rms=0.030066 Jy/beam ! Combined flux in latest and established models = 1.12296 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.12296 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.398903Jy sigma=0.002190 ! Fit after self-cal, rms=0.393574Jy sigma=0.002160 ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=6.706 mas, bpa=-5.95 degrees ! Estimated noise=5780.68 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=8.008 mas, bpa=-4.581 degrees ! Estimated noise=3585.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.148965 Jy ! Component: 100 - total flux cleaned = 0.204122 Jy ! Component: 150 - total flux cleaned = 0.224162 Jy ! Component: 200 - total flux cleaned = 0.225842 Jy ! Total flux subtracted in 200 components = 0.225842 Jy ! Clean residual min=-0.066795 max=0.107725 Jy/beam ! Clean residual mean=0.001577 rms=0.024949 Jy/beam ! Combined flux in latest and established models = 1.3488 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 1.3488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369255Jy sigma=0.001953 ! Fit after self-cal, rms=0.369045Jy sigma=0.001953 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.848 x 8.008 at -4.581 degrees (North through East) ! Clean map min=-0.063855 max=1.0176 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.972783 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.00* KP 0.90 ! LA 0.90 NL 1.27 OV 1.07 PT 0.95 ! SC 1.10 MK 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.958182 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00* ! LA 0.90 NL 1.36 OV 1.12 PT 0.94 ! SC 1.07 MK 1.07 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.950041 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.99 ! LA 0.92 NL 1.48 OV 1.12 PT 1.10 ! SC 0.94 MK 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02244 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 0.99 ! LA 0.78 NL 1.40 OV 0.98 PT 0.93 ! SC 0.86 MK 0.97 ! ! ! Fit before self-cal, rms=0.369045Jy sigma=0.001953 ! Fit after self-cal, rms=0.330563Jy sigma=0.001698 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330563Jy sigma=0.001698 ! Fit after self-cal, rms=0.331177Jy sigma=0.001698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.952 mas, bpa=-4.027 degrees ! Estimated noise=3399.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -15.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451417 Jy ! Component: 100 - total flux cleaned = 0.0421847 Jy ! Component: 150 - total flux cleaned = 0.0413733 Jy ! Component: 200 - total flux cleaned = 0.040809 Jy ! Total flux subtracted in 200 components = 0.040809 Jy ! Clean residual min=-0.023258 max=0.023887 Jy/beam ! Clean residual mean=-0.000115 rms=0.007335 Jy/beam ! Combined flux in latest and established models = 1.38961 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 63 components and 1.38961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312463Jy sigma=0.001594 ! Fit after self-cal, rms=0.311282Jy sigma=0.001591 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311282Jy sigma=0.001591 ! Fit after self-cal, rms=0.273587Jy sigma=0.001359 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120002 Jy ! Component: 100 - total flux cleaned = 0.0120327 Jy ! Component: 150 - total flux cleaned = 0.0113307 Jy ! Component: 200 - total flux cleaned = 0.0110148 Jy ! Total flux subtracted in 200 components = 0.0110148 Jy ! Clean residual min=-0.023957 max=0.023482 Jy/beam ! Clean residual mean=-0.000205 rms=0.007070 Jy/beam ! Combined flux in latest and established models = 1.40063 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 1.40063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271495Jy sigma=0.001352 ! Fit after self-cal, rms=0.261408Jy sigma=0.001293 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 7.952 at -4.027 degrees (North through East) ! Clean map min=-0.024774 max=1.0094 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261408Jy sigma=0.001293 ! Fit after self-cal, rms=0.244100Jy sigma=0.001231 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244100Jy sigma=0.001231 ! Fit after self-cal, rms=0.241605Jy sigma=0.001218 ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.899 mas, bpa=-3.818 degrees ! Estimated noise=3360.12 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214903 Jy ! Component: 100 - total flux cleaned = 0.024408 Jy ! Component: 150 - total flux cleaned = 0.0238202 Jy ! Component: 200 - total flux cleaned = 0.0235467 Jy ! Total flux subtracted in 200 components = 0.0235467 Jy ! Clean residual min=-0.016389 max=0.016355 Jy/beam ! Clean residual mean=-0.000028 rms=0.004900 Jy/beam ! Combined flux in latest and established models = 1.42417 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 102 components and 1.42417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239252Jy sigma=0.001208 ! Fit after self-cal, rms=0.238072Jy sigma=0.001203 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238072Jy sigma=0.001203 ! Fit after self-cal, rms=0.235184Jy sigma=0.001199 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235184Jy sigma=0.001199 ! Fit after self-cal, rms=0.235048Jy sigma=0.001199 ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.898 mas, bpa=-3.767 degrees ! Estimated noise=3361.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133747 Jy ! Component: 100 - total flux cleaned = 0.0136879 Jy ! Component: 150 - total flux cleaned = 0.0129981 Jy ! Component: 200 - total flux cleaned = 0.0124043 Jy ! Total flux subtracted in 200 components = 0.0124043 Jy ! Clean residual min=-0.016026 max=0.013937 Jy/beam ! Clean residual mean=-0.000027 rms=0.004300 Jy/beam ! Combined flux in latest and established models = 1.43658 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 120 components and 1.43658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233812Jy sigma=0.001194 ! Fit after self-cal, rms=0.233450Jy sigma=0.001194 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.687 mas, bmaj=31.67 mas, bpa=0.01426 degrees ! Estimated noise=4528.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648556 Jy ! Component: 100 - total flux cleaned = 0.000495548 Jy ! Component: 150 - total flux cleaned = 0.000386553 Jy ! Component: 200 - total flux cleaned = 0.000134488 Jy ! Total flux subtracted in 200 components = 0.000134488 Jy ! Clean residual min=-0.015394 max=0.016067 Jy/beam ! Clean residual mean=-0.000090 rms=0.006691 Jy/beam ! Combined flux in latest and established models = 1.43671 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 129 components and 1.43671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233201Jy sigma=0.001193 ! Fit after self-cal, rms=0.233021Jy sigma=0.001192 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.369 mas, bmaj=6.658 mas, bpa=-5.422 degrees ! Estimated noise=5524.97 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.851269 Jy ! Component: 100 - total flux cleaned = 1.09011 Jy ! Component: 150 - total flux cleaned = 1.21214 Jy ! Component: 200 - total flux cleaned = 1.2888 Jy ! Total flux subtracted in 200 components = 1.2888 Jy ! Clean residual min=-0.033577 max=0.032912 Jy/beam ! Clean residual mean=0.000595 rms=0.010901 Jy/beam ! Combined flux in latest and established models = 1.28879 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 1.28879 Jy ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.898 mas, bpa=-3.767 degrees ! Estimated noise=3361.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0669589 Jy ! Component: 100 - total flux cleaned = 0.103197 Jy ! Component: 150 - total flux cleaned = 0.124321 Jy ! Component: 200 - total flux cleaned = 0.13696 Jy ! Total flux subtracted in 200 components = 0.13696 Jy ! Clean residual min=-0.015383 max=0.014410 Jy/beam ! Clean residual mean=0.000011 rms=0.004594 Jy/beam ! Combined flux in latest and established models = 1.42575 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 85 components and 1.42576 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.687 mas, bmaj=31.67 mas, bpa=0.01426 degrees ! Estimated noise=4528.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708908 Jy ! Component: 100 - total flux cleaned = 0.0083016 Jy ! Component: 150 - total flux cleaned = 0.00882947 Jy ! Component: 200 - total flux cleaned = 0.00947942 Jy ! Total flux subtracted in 200 components = 0.00947942 Jy ! Clean residual min=-0.015046 max=0.016817 Jy/beam ! Clean residual mean=-0.000096 rms=0.006707 Jy/beam ! Combined flux in latest and established models = 1.43523 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 1.43523 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.898 mas, bpa=-3.767 degrees ! Estimated noise=3361.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114009 Jy ! Component: 100 - total flux cleaned = 0.00162903 Jy ! Component: 150 - total flux cleaned = 0.00220856 Jy ! Component: 200 - total flux cleaned = 0.00237471 Jy ! Total flux subtracted in 200 components = 0.00237471 Jy ! Clean residual min=-0.013911 max=0.014316 Jy/beam ! Clean residual mean=-0.000025 rms=0.004226 Jy/beam ! Combined flux in latest and established models = 1.43761 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 1.43761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232850Jy sigma=0.001191 ! Fit after self-cal, rms=0.232598Jy sigma=0.001191 wmodel J2109-4110_S_2002_05_14_yyk\_map.mod ! Writing 105 model components to file: J2109-4110_S_2002_05_14_yyk_map.mod wobs J2109-4110_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J2109-4110_S_2002_05_14_yyk_uvs.fits wwins J2109-4110_S_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J2109-4110_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199691 Jy ! Component: 100 - total flux cleaned = -0.00418196 Jy ! Component: 150 - total flux cleaned = -0.00705033 Jy ! Component: 200 - total flux cleaned = -0.00927714 Jy ! Component: 250 - total flux cleaned = -0.0102178 Jy ! Component: 300 - total flux cleaned = -0.0105163 Jy ! Component: 350 - total flux cleaned = -0.0102489 Jy ! Component: 400 - total flux cleaned = -0.0101181 Jy ! Component: 450 - total flux cleaned = -0.00974403 Jy ! Component: 500 - total flux cleaned = -0.00902046 Jy ! Component: 550 - total flux cleaned = -0.00842955 Jy ! Component: 600 - total flux cleaned = -0.00808813 Jy ! Component: 650 - total flux cleaned = -0.0079793 Jy ! Component: 700 - total flux cleaned = -0.00808765 Jy ! Component: 750 - total flux cleaned = -0.00787238 Jy ! Component: 800 - total flux cleaned = -0.00766463 Jy ! Component: 850 - total flux cleaned = -0.00745836 Jy ! Component: 900 - total flux cleaned = -0.00735668 Jy ! Component: 950 - total flux cleaned = -0.00696261 Jy ! Component: 1000 - total flux cleaned = -0.00637782 Jy ! Component: 1050 - total flux cleaned = -0.0058018 Jy ! Component: 1100 - total flux cleaned = -0.00523375 Jy ! Component: 1150 - total flux cleaned = -0.00457675 Jy ! Component: 1200 - total flux cleaned = -0.00383116 Jy ! Component: 1250 - total flux cleaned = -0.00299576 Jy ! Component: 1300 - total flux cleaned = -0.00243876 Jy ! Component: 1350 - total flux cleaned = -0.00178758 Jy ! Component: 1400 - total flux cleaned = -0.00104013 Jy ! Component: 1450 - total flux cleaned = -0.000381197 Jy ! Component: 1500 - total flux cleaned = 0.000286078 Jy ! Component: 1550 - total flux cleaned = 0.000961111 Jy ! Component: 1600 - total flux cleaned = 0.00164519 Jy ! Component: 1650 - total flux cleaned = 0.0021399 Jy ! Component: 1700 - total flux cleaned = 0.00274174 Jy ! Component: 1750 - total flux cleaned = 0.00314921 Jy ! Component: 1800 - total flux cleaned = 0.00346029 Jy ! Component: 1850 - total flux cleaned = 0.0038817 Jy ! Component: 1900 - total flux cleaned = 0.00441785 Jy ! Component: 1950 - total flux cleaned = 0.00485558 Jy ! Component: 2000 - total flux cleaned = 0.00529974 Jy ! Total flux subtracted in 2048 components = 0.00575002 Jy ! Clean residual min=-0.006470 max=0.008492 Jy/beam ! Clean residual mean=0.000169 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 1.44336 Jy keep ! Adding 111 model components to the UV plane model. ! The established model now contains 216 components and 1.44336 Jy ![Exited script file: muppet] wmap "J2109-4110_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.898 at -3.767 degrees (North through East) ! Clean map min=-0.020017 max=1.0236 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.02361 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00239438 device "J2109-4110_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J2109-4110_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.701744 0.701744 1.40349 2.80698 5.61395 11.2279 22.4558 44.9116 89.8232 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0071 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.023 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.898 at -3.767 degrees (North through East) ! Clean map min=-0.020017 max=1.0236 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2109-4110_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J2109-4110_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2109-4110_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 23:15:46 2007