! Started logfile: J2101-4219_S_2002_01_31_yyk_uvs.log on Tue Jun 26 23:15:10 2007 obs J2101-4219_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J2101-4219_S_2002_01_31_yyk_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.548366 visibilities/baseline/integration-bin. ! Found source: J2101-4219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 3356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2101-4219_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.552106 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.326 mas, bmaj=6.567 mas, bpa=0.374 degrees ! Estimated noise=3463.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.344244 Jy ! Component: 100 - total flux cleaned = 0.463734 Jy ! Total flux subtracted in 100 components = 0.463734 Jy ! Clean residual min=-0.031939 max=0.056023 Jy/beam ! Clean residual mean=0.000236 rms=0.015313 Jy/beam ! Combined flux in latest and established models = 0.463734 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.463734 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.324071Jy sigma=0.001681 ! Fit after self-cal, rms=0.323382Jy sigma=0.001677 ! Inverting map and beam ! Estimated beam: bmin=2.326 mas, bmaj=6.567 mas, bpa=0.374 degrees ! Estimated noise=3463.55 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=7.662 mas, bpa=-2.345 degrees ! Estimated noise=2340.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.121842 Jy ! Component: 100 - total flux cleaned = 0.172975 Jy ! Component: 150 - total flux cleaned = 0.194852 Jy ! Component: 200 - total flux cleaned = 0.204213 Jy ! Total flux subtracted in 200 components = 0.204213 Jy ! Clean residual min=-0.038166 max=0.057122 Jy/beam ! Clean residual mean=-0.000427 rms=0.016598 Jy/beam ! Combined flux in latest and established models = 0.667947 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.667947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310286Jy sigma=0.001506 ! Fit after self-cal, rms=0.310278Jy sigma=0.001506 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.637 x 7.662 at -2.345 degrees (North through East) ! Clean map min=-0.037608 max=0.39116 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.951048 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.01 ! LA 1.05 MK 0.96 NL 1.62 OV 0.97 ! PT 0.87 SC 1.07 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.944321 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.00* KP 1.00* ! LA 1.07 MK 0.97 NL 1.75 OV 1.02 ! PT 0.84 SC 1.07 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.909979 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.00* KP 1.10 ! LA 1.11 MK 1.02 NL 1.96 OV 1.03 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.917355 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.78 HN 1.00* KP 1.20 ! LA 0.95 MK 1.12 NL 2.01 OV 0.93 ! PT 0.87 SC 1.04 ! ! ! Fit before self-cal, rms=0.310278Jy sigma=0.001506 ! Fit after self-cal, rms=0.327184Jy sigma=0.001422 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327184Jy sigma=0.001422 ! Fit after self-cal, rms=0.327327Jy sigma=0.001421 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=7.718 mas, bpa=-2.076 degrees ! Estimated noise=1999.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0600109 Jy ! Component: 100 - total flux cleaned = -0.0795817 Jy ! Component: 150 - total flux cleaned = -0.0868089 Jy ! Component: 200 - total flux cleaned = -0.0875568 Jy ! Total flux subtracted in 200 components = -0.0875568 Jy ! Clean residual min=-0.014655 max=0.020421 Jy/beam ! Clean residual mean=0.000170 rms=0.005036 Jy/beam ! Combined flux in latest and established models = 0.58039 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 0.58039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.319850Jy sigma=0.001357 ! Fit after self-cal, rms=0.319836Jy sigma=0.001357 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.319836Jy sigma=0.001357 ! Fit after self-cal, rms=0.303568Jy sigma=0.001226 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160666 Jy ! Component: 100 - total flux cleaned = 0.000805359 Jy ! Component: 150 - total flux cleaned = 0.000520925 Jy ! Component: 200 - total flux cleaned = 0.000498355 Jy ! Total flux subtracted in 200 components = 0.000498355 Jy ! Clean residual min=-0.014159 max=0.021722 Jy/beam ! Clean residual mean=0.000163 rms=0.005029 Jy/beam ! Combined flux in latest and established models = 0.580888 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.580888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302013Jy sigma=0.001218 ! Fit after self-cal, rms=0.300818Jy sigma=0.001210 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.697 x 7.718 at -2.076 degrees (North through East) ! Clean map min=-0.01402 max=0.37013 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300818Jy sigma=0.001210 ! Fit after self-cal, rms=0.297131Jy sigma=0.001204 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297131Jy sigma=0.001204 ! Fit after self-cal, rms=0.296855Jy sigma=0.001202 ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=7.654 mas, bpa=-1.477 degrees ! Estimated noise=1981.59 mJy/beam. ! Added new window around map position (-10.5, -3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195182 Jy ! Component: 100 - total flux cleaned = 0.0214425 Jy ! Component: 150 - total flux cleaned = 0.0229288 Jy ! Component: 200 - total flux cleaned = 0.0239889 Jy ! Total flux subtracted in 200 components = 0.0239889 Jy ! Clean residual min=-0.011041 max=0.011353 Jy/beam ! Clean residual mean=0.000265 rms=0.003162 Jy/beam ! Combined flux in latest and established models = 0.604877 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.604877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294608Jy sigma=0.001192 ! Fit after self-cal, rms=0.294327Jy sigma=0.001191 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294327Jy sigma=0.001191 ! Fit after self-cal, rms=0.288519Jy sigma=0.001185 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288519Jy sigma=0.001185 ! Fit after self-cal, rms=0.288495Jy sigma=0.001184 ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=7.665 mas, bpa=-1.117 degrees ! Estimated noise=1975.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985561 Jy ! Component: 100 - total flux cleaned = 0.0112886 Jy ! Component: 150 - total flux cleaned = 0.0121572 Jy ! Component: 200 - total flux cleaned = 0.0126808 Jy ! Total flux subtracted in 200 components = 0.0126808 Jy ! Clean residual min=-0.008770 max=0.008973 Jy/beam ! Clean residual mean=0.000220 rms=0.002481 Jy/beam ! Combined flux in latest and established models = 0.617558 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 112 components and 0.617558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287898Jy sigma=0.001182 ! Fit after self-cal, rms=0.287795Jy sigma=0.001182 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.092 mas, bmaj=29.95 mas, bpa=3.214 degrees ! Estimated noise=2763.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260165 Jy ! Component: 100 - total flux cleaned = 0.00243546 Jy ! Component: 150 - total flux cleaned = 0.0021158 Jy ! Component: 200 - total flux cleaned = 0.00183786 Jy ! Total flux subtracted in 200 components = 0.00183786 Jy ! Clean residual min=-0.011877 max=0.008517 Jy/beam ! Clean residual mean=0.000489 rms=0.003758 Jy/beam ! Combined flux in latest and established models = 0.619396 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 120 components and 0.619395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287586Jy sigma=0.001181 ! Fit after self-cal, rms=0.287558Jy sigma=0.001181 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.298 mas, bmaj=6.476 mas, bpa=0.7961 degrees ! Estimated noise=3106.77 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.332751 Jy ! Component: 100 - total flux cleaned = 0.443036 Jy ! Component: 150 - total flux cleaned = 0.501899 Jy ! Component: 200 - total flux cleaned = 0.538466 Jy ! Total flux subtracted in 200 components = 0.538466 Jy ! Clean residual min=-0.013166 max=0.014782 Jy/beam ! Clean residual mean=0.000262 rms=0.005112 Jy/beam ! Combined flux in latest and established models = 0.538466 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.538466 Jy ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=7.665 mas, bpa=-1.117 degrees ! Estimated noise=1975.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359658 Jy ! Component: 100 - total flux cleaned = 0.0534789 Jy ! Component: 150 - total flux cleaned = 0.0642799 Jy ! Component: 200 - total flux cleaned = 0.0712759 Jy ! Total flux subtracted in 200 components = 0.0712759 Jy ! Clean residual min=-0.010778 max=0.008182 Jy/beam ! Clean residual mean=0.000221 rms=0.002556 Jy/beam ! Combined flux in latest and established models = 0.609742 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 89 components and 0.609742 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.092 mas, bmaj=29.95 mas, bpa=3.214 degrees ! Estimated noise=2763.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650982 Jy ! Component: 100 - total flux cleaned = 0.00909307 Jy ! Component: 150 - total flux cleaned = 0.00958359 Jy ! Component: 200 - total flux cleaned = 0.00963136 Jy ! Total flux subtracted in 200 components = 0.00963136 Jy ! Clean residual min=-0.011985 max=0.008452 Jy/beam ! Clean residual mean=0.000482 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 0.619373 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.619373 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=7.665 mas, bpa=-1.117 degrees ! Estimated noise=1975.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249448 Jy ! Component: 100 - total flux cleaned = 0.000254314 Jy ! Component: 150 - total flux cleaned = 0.00047845 Jy ! Component: 200 - total flux cleaned = 0.000614707 Jy ! Total flux subtracted in 200 components = 0.000614707 Jy ! Clean residual min=-0.009642 max=0.008327 Jy/beam ! Clean residual mean=0.000234 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.619988 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 0.619988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287085Jy sigma=0.001180 ! Fit after self-cal, rms=0.287033Jy sigma=0.001180 wmodel J2101-4219_S_2002_01_31_yyk\_map.mod ! Writing 114 model components to file: J2101-4219_S_2002_01_31_yyk_map.mod wobs J2101-4219_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J2101-4219_S_2002_01_31_yyk_uvs.fits wwins J2101-4219_S_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J2101-4219_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155396 Jy ! Component: 100 - total flux cleaned = -0.000970972 Jy ! Component: 150 - total flux cleaned = -3.08525e-05 Jy ! Component: 200 - total flux cleaned = 0.000720404 Jy ! Component: 250 - total flux cleaned = 0.00193289 Jy ! Component: 300 - total flux cleaned = 0.00314958 Jy ! Component: 350 - total flux cleaned = 0.00391197 Jy ! Component: 400 - total flux cleaned = 0.00434794 Jy ! Component: 450 - total flux cleaned = 0.00476865 Jy ! Component: 500 - total flux cleaned = 0.00558169 Jy ! Component: 550 - total flux cleaned = 0.00637344 Jy ! Component: 600 - total flux cleaned = 0.00720793 Jy ! Component: 650 - total flux cleaned = 0.00795915 Jy ! Component: 700 - total flux cleaned = 0.00881444 Jy ! Component: 750 - total flux cleaned = 0.00959065 Jy ! Component: 800 - total flux cleaned = 0.0103498 Jy ! Component: 850 - total flux cleaned = 0.011149 Jy ! Component: 900 - total flux cleaned = 0.0119315 Jy ! Component: 950 - total flux cleaned = 0.0126975 Jy ! Component: 1000 - total flux cleaned = 0.0134491 Jy ! Component: 1050 - total flux cleaned = 0.0142917 Jy ! Component: 1100 - total flux cleaned = 0.0151188 Jy ! Component: 1150 - total flux cleaned = 0.0159308 Jy ! Component: 1200 - total flux cleaned = 0.0166791 Jy ! Component: 1250 - total flux cleaned = 0.017366 Jy ! Component: 1300 - total flux cleaned = 0.0179941 Jy ! Component: 1350 - total flux cleaned = 0.0184719 Jy ! Component: 1400 - total flux cleaned = 0.0190388 Jy ! Component: 1450 - total flux cleaned = 0.0195064 Jy ! Component: 1500 - total flux cleaned = 0.0199704 Jy ! Component: 1550 - total flux cleaned = 0.0205221 Jy ! Component: 1600 - total flux cleaned = 0.0209323 Jy ! Component: 1650 - total flux cleaned = 0.021475 Jy ! Component: 1700 - total flux cleaned = 0.0218794 Jy ! Component: 1750 - total flux cleaned = 0.0223259 Jy ! Component: 1800 - total flux cleaned = 0.022859 Jy ! Component: 1850 - total flux cleaned = 0.0233902 Jy ! Component: 1900 - total flux cleaned = 0.0238318 Jy ! Component: 1950 - total flux cleaned = 0.0242297 Jy ! Component: 2000 - total flux cleaned = 0.0246291 Jy ! Total flux subtracted in 2048 components = 0.0249405 Jy ! Clean residual min=-0.002859 max=0.003711 Jy/beam ! Clean residual mean=0.000235 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.644929 Jy keep ! Adding 99 model components to the UV plane model. ! The established model now contains 213 components and 0.644929 Jy ![Exited script file: muppet] wmap "J2101-4219_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.678 x 7.665 at -1.117 degrees (North through East) ! Clean map min=-0.005427 max=0.38667 Jy/beam ! Writing clean map to FITS file: J2101-4219_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.38667 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000820235 device "J2101-4219_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J2101-4219_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.636384 0.636384 1.27277 2.54554 5.09107 10.1821 20.3643 40.7286 81.4572 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.386 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.678 x 7.665 at -1.117 degrees (North through East) ! Clean map min=-0.005427 max=0.38667 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2101-4219_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J2101-4219_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2101-4219_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 23:15:17 2007