! Started logfile: J1956-3225_X_2002_01_31_yyk_uvs.log on Wed Jun 27 11:03:07 2007 obs J1956-3225_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1956-3225_X_2002_01_31_yyk_uva.fits ! AN table 1: 77 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.629726 visibilities/baseline/integration-bin. ! Found source: J1956-3225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 8728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J1956-3225_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.550932 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6253 mas, bmaj=1.527 mas, bpa=1.561 degrees ! Estimated noise=1616.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.434033 Jy ! Component: 100 - total flux cleaned = 0.50281 Jy ! Total flux subtracted in 100 components = 0.50281 Jy ! Clean residual min=-0.025971 max=0.024519 Jy/beam ! Clean residual mean=0.000109 rms=0.006181 Jy/beam ! Combined flux in latest and established models = 0.50281 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.50281 Jy ! ! Correcting IF 1. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.231652Jy sigma=0.001521 ! Fit after self-cal, rms=0.231532Jy sigma=0.001521 ! Inverting map and beam ! Estimated beam: bmin=0.6253 mas, bmaj=1.527 mas, bpa=1.561 degrees ! Estimated noise=1616.96 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8172 mas, bmaj=1.994 mas, bpa=-0.1416 degrees ! Estimated noise=1141.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247699 Jy ! Component: 100 - total flux cleaned = 0.0301714 Jy ! Component: 150 - total flux cleaned = 0.0301699 Jy ! Component: 200 - total flux cleaned = 0.030304 Jy ! Total flux subtracted in 200 components = 0.030304 Jy ! Clean residual min=-0.022661 max=0.023930 Jy/beam ! Clean residual mean=0.000330 rms=0.006309 Jy/beam ! Combined flux in latest and established models = 0.533114 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.533114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231363Jy sigma=0.001508 ! Fit after self-cal, rms=0.231354Jy sigma=0.001507 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8172 x 1.994 at -0.1416 degrees (North through East) ! Clean map min=-0.021124 max=0.51207 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.996937 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.00* KP 1.02 ! LA 1.18 MK 0.99 NL 1.00* OV 0.92 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00441 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.91 HN 1.00* KP 0.98 ! LA 1.16 MK 0.98 NL 1.00* OV 0.91 ! PT 1.08 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.985272 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.86 HN 1.00* KP 0.98 ! LA 1.18 MK 1.03 NL 1.00* OV 0.93 ! PT 1.12 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.969134 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.84 HN 1.00* KP 1.08 ! LA 1.18 MK 1.05 NL 1.00* OV 0.97 ! PT 1.23 SC 1.00 ! ! ! Fit before self-cal, rms=0.231354Jy sigma=0.001507 ! Fit after self-cal, rms=0.223637Jy sigma=0.001443 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223637Jy sigma=0.001443 ! Fit after self-cal, rms=0.223649Jy sigma=0.001443 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8236 mas, bmaj=2.008 mas, bpa=0.2319 degrees ! Estimated noise=1111.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00918891 Jy ! Component: 100 - total flux cleaned = -0.0103672 Jy ! Component: 150 - total flux cleaned = -0.0107298 Jy ! Component: 200 - total flux cleaned = -0.0107368 Jy ! Total flux subtracted in 200 components = -0.0107368 Jy ! Clean residual min=-0.011178 max=0.009207 Jy/beam ! Clean residual mean=-0.000078 rms=0.002783 Jy/beam ! Combined flux in latest and established models = 0.522377 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.522377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222797Jy sigma=0.001441 ! Fit after self-cal, rms=0.222791Jy sigma=0.001441 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222791Jy sigma=0.001441 ! Fit after self-cal, rms=0.204120Jy sigma=0.001290 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174013 Jy ! Component: 100 - total flux cleaned = 0.000751428 Jy ! Component: 150 - total flux cleaned = 0.000597822 Jy ! Component: 200 - total flux cleaned = 0.000470847 Jy ! Total flux subtracted in 200 components = 0.000470847 Jy ! Clean residual min=-0.011398 max=0.009786 Jy/beam ! Clean residual mean=-0.000075 rms=0.002802 Jy/beam ! Combined flux in latest and established models = 0.522848 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.522848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203992Jy sigma=0.001287 ! Fit after self-cal, rms=0.201402Jy sigma=0.001266 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8236 x 2.008 at 0.2319 degrees (North through East) ! Clean map min=-0.01088 max=0.51284 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201402Jy sigma=0.001266 ! Fit after self-cal, rms=0.213777Jy sigma=0.001242 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213777Jy sigma=0.001242 ! Fit after self-cal, rms=0.213304Jy sigma=0.001238 ! Inverting map and beam ! Estimated beam: bmin=0.8191 mas, bmaj=1.989 mas, bpa=0.3656 degrees ! Estimated noise=1104.56 mJy/beam. ! Added new window around map position (-8.2, 3.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101875 Jy ! Component: 100 - total flux cleaned = 0.0147471 Jy ! Component: 150 - total flux cleaned = 0.0172791 Jy ! Component: 200 - total flux cleaned = 0.0185933 Jy ! Total flux subtracted in 200 components = 0.0185933 Jy ! Clean residual min=-0.005570 max=0.004538 Jy/beam ! Clean residual mean=-0.000013 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.541441 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 0.541441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212878Jy sigma=0.001235 ! Fit after self-cal, rms=0.212727Jy sigma=0.001233 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212727Jy sigma=0.001233 ! Fit after self-cal, rms=0.212351Jy sigma=0.001228 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212351Jy sigma=0.001228 ! Fit after self-cal, rms=0.212324Jy sigma=0.001228 ! Inverting map and beam ! Estimated beam: bmin=0.8175 mas, bmaj=1.985 mas, bpa=0.3925 degrees ! Estimated noise=1103.21 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348754 Jy ! Component: 100 - total flux cleaned = 0.00502023 Jy ! Component: 150 - total flux cleaned = 0.00546169 Jy ! Component: 200 - total flux cleaned = 0.00574596 Jy ! Total flux subtracted in 200 components = 0.00574596 Jy ! Clean residual min=-0.004818 max=0.004126 Jy/beam ! Clean residual mean=-0.000012 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.547187 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.547187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212251Jy sigma=0.001227 ! Fit after self-cal, rms=0.212242Jy sigma=0.001227 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.522 mas, bpa=9.015 degrees ! Estimated noise=1446 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214261 Jy ! Component: 100 - total flux cleaned = 0.00282983 Jy ! Component: 150 - total flux cleaned = 0.00293264 Jy ! Component: 200 - total flux cleaned = 0.00299747 Jy ! Total flux subtracted in 200 components = 0.00299747 Jy ! Clean residual min=-0.004651 max=0.004738 Jy/beam ! Clean residual mean=-0.000009 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.550184 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.550184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212234Jy sigma=0.001227 ! Fit after self-cal, rms=0.212236Jy sigma=0.001227 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6248 mas, bmaj=1.522 mas, bpa=1.577 degrees ! Estimated noise=1577.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.43666 Jy ! Component: 100 - total flux cleaned = 0.498992 Jy ! Component: 150 - total flux cleaned = 0.518451 Jy ! Component: 200 - total flux cleaned = 0.528154 Jy ! Total flux subtracted in 200 components = 0.528154 Jy ! Clean residual min=-0.006713 max=0.006748 Jy/beam ! Clean residual mean=-0.000022 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.528154 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.528154 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8175 mas, bmaj=1.985 mas, bpa=0.3925 degrees ! Estimated noise=1103.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00890934 Jy ! Component: 100 - total flux cleaned = 0.0138207 Jy ! Component: 150 - total flux cleaned = 0.0170537 Jy ! Component: 200 - total flux cleaned = 0.0182659 Jy ! Total flux subtracted in 200 components = 0.0182659 Jy ! Clean residual min=-0.005004 max=0.004413 Jy/beam ! Clean residual mean=-0.000014 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.54642 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 49 components and 0.54642 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.522 mas, bpa=9.015 degrees ! Estimated noise=1446 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292849 Jy ! Component: 100 - total flux cleaned = 0.00353891 Jy ! Component: 150 - total flux cleaned = 0.00376134 Jy ! Component: 200 - total flux cleaned = 0.00384364 Jy ! Total flux subtracted in 200 components = 0.00384364 Jy ! Clean residual min=-0.004793 max=0.004722 Jy/beam ! Clean residual mean=-0.000007 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.550264 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.550264 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8175 mas, bmaj=1.985 mas, bpa=0.3925 degrees ! Estimated noise=1103.21 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000895714 Jy ! Component: 100 - total flux cleaned = -0.000608992 Jy ! Component: 150 - total flux cleaned = -0.000424751 Jy ! Component: 200 - total flux cleaned = -0.000369752 Jy ! Total flux subtracted in 200 components = -0.000369752 Jy ! Clean residual min=-0.004904 max=0.004458 Jy/beam ! Clean residual mean=-0.000002 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.549894 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.549894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212293Jy sigma=0.001227 ! Fit after self-cal, rms=0.212277Jy sigma=0.001227 wmodel J1956-3225_X_2002_01_31_yyk\_map.mod ! Writing 66 model components to file: J1956-3225_X_2002_01_31_yyk_map.mod wobs J1956-3225_X_2002_01_31_yyk\_uvs.fits ! Applying 77 buffered edits. ! Writing UV FITS file: J1956-3225_X_2002_01_31_yyk_uvs.fits wwins J1956-3225_X_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J1956-3225_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000793955 Jy ! Component: 100 - total flux cleaned = -0.00146388 Jy ! Component: 150 - total flux cleaned = -0.00214591 Jy ! Component: 200 - total flux cleaned = -0.00272765 Jy ! Component: 250 - total flux cleaned = -0.00291247 Jy ! Component: 300 - total flux cleaned = -0.00332869 Jy ! Component: 350 - total flux cleaned = -0.00366962 Jy ! Component: 400 - total flux cleaned = -0.00383505 Jy ! Component: 450 - total flux cleaned = -0.00415333 Jy ! Component: 500 - total flux cleaned = -0.00435878 Jy ! Component: 550 - total flux cleaned = -0.00460807 Jy ! Component: 600 - total flux cleaned = -0.00494608 Jy ! Component: 650 - total flux cleaned = -0.00513467 Jy ! Component: 700 - total flux cleaned = -0.00532 Jy ! Component: 750 - total flux cleaned = -0.00558868 Jy ! Component: 800 - total flux cleaned = -0.00584906 Jy ! Component: 850 - total flux cleaned = -0.00601837 Jy ! Component: 900 - total flux cleaned = -0.00626771 Jy ! Component: 950 - total flux cleaned = -0.00634859 Jy ! Component: 1000 - total flux cleaned = -0.0065478 Jy ! Component: 1050 - total flux cleaned = -0.00662556 Jy ! Component: 1100 - total flux cleaned = -0.00674013 Jy ! Component: 1150 - total flux cleaned = -0.00677746 Jy ! Component: 1200 - total flux cleaned = -0.0068518 Jy ! Component: 1250 - total flux cleaned = -0.00699625 Jy ! Component: 1300 - total flux cleaned = -0.00699541 Jy ! Component: 1350 - total flux cleaned = -0.00699534 Jy ! Component: 1400 - total flux cleaned = -0.00682399 Jy ! Component: 1450 - total flux cleaned = -0.00682427 Jy ! Component: 1500 - total flux cleaned = -0.0068581 Jy ! Component: 1550 - total flux cleaned = -0.00679312 Jy ! Component: 1600 - total flux cleaned = -0.0068899 Jy ! Component: 1650 - total flux cleaned = -0.00682528 Jy ! Component: 1700 - total flux cleaned = -0.00663613 Jy ! Component: 1750 - total flux cleaned = -0.00657415 Jy ! Component: 1800 - total flux cleaned = -0.00654391 Jy ! Component: 1850 - total flux cleaned = -0.0065441 Jy ! Component: 1900 - total flux cleaned = -0.00648394 Jy ! Component: 1950 - total flux cleaned = -0.00657287 Jy ! Component: 2000 - total flux cleaned = -0.00660168 Jy ! Total flux subtracted in 2048 components = -0.00663029 Jy ! Clean residual min=-0.001588 max=0.001477 Jy/beam ! Clean residual mean=0.000000 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.543264 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 197 components and 0.543264 Jy ![Exited script file: muppet] wmap "J1956-3225_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8175 x 1.985 at 0.3925 degrees (North through East) ! Clean map min=-0.0032849 max=0.50921 Jy/beam ! Writing clean map to FITS file: J1956-3225_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.509214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000527459 device "J1956-3225_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1956-3225_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.310749 0.310749 0.621498 1.243 2.48599 4.97198 9.94397 19.8879 39.7759 79.5517 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.509 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8175 x 1.985 at 0.3925 degrees (North through East) ! Clean map min=-0.0032849 max=0.50921 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1956-3225_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1956-3225_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1956-3225_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 11:03:13 2007