! Started logfile: J1939-1525_S_2002_01_31_yyk_uvs.log on Tue Jun 26 23:09:51 2007 obs J1939-1525_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1939-1525_S_2002_01_31_yyk_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.694253 visibilities/baseline/integration-bin. ! Found source: J1939-1525 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 7248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1939-1525_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.456877 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=14.47 mas, bpa=-16.72 degrees ! Estimated noise=1528.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.325348 Jy ! Component: 100 - total flux cleaned = 0.392397 Jy ! Total flux subtracted in 100 components = 0.392397 Jy ! Clean residual min=-0.029669 max=0.028305 Jy/beam ! Clean residual mean=-0.000068 rms=0.007135 Jy/beam ! Combined flux in latest and established models = 0.392397 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.392397 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.246856Jy sigma=0.001690 ! Fit after self-cal, rms=0.246764Jy sigma=0.001689 ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=14.47 mas, bpa=-16.72 degrees ! Estimated noise=1528.39 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=14.08 mas, bpa=-16.77 degrees ! Estimated noise=1208.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383642 Jy ! Component: 100 - total flux cleaned = 0.0383389 Jy ! Component: 150 - total flux cleaned = 0.0375958 Jy ! Component: 200 - total flux cleaned = 0.0352064 Jy ! Total flux subtracted in 200 components = 0.0352064 Jy ! Clean residual min=-0.019316 max=0.026634 Jy/beam ! Clean residual mean=-0.000085 rms=0.006930 Jy/beam ! Combined flux in latest and established models = 0.427604 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.427604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242411Jy sigma=0.001631 ! Fit after self-cal, rms=0.242393Jy sigma=0.001631 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.31 x 14.08 at -16.77 degrees (North through East) ! Clean map min=-0.019221 max=0.37877 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.991459 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.05 HN 0.90 KP 1.10 ! LA 1.27 MK 1.01 NL 1.03 OV 0.90 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.973755 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 0.96 KP 1.00* ! LA 1.27 MK 1.06 NL 1.17 OV 1.06 ! PT 0.90 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.936273 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 1.04 KP 1.21 ! LA 1.32 MK 1.02 NL 1.22 OV 0.95 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.980764 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.80 HN 1.05 KP 1.25 ! LA 1.10 MK 1.01 NL 1.28 OV 0.83 ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.242393Jy sigma=0.001631 ! Fit after self-cal, rms=0.239239Jy sigma=0.001569 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239239Jy sigma=0.001569 ! Fit after self-cal, rms=0.239238Jy sigma=0.001568 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=13.52 mas, bpa=-16.29 degrees ! Estimated noise=1124.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0167923 Jy ! Component: 100 - total flux cleaned = -0.0155155 Jy ! Component: 150 - total flux cleaned = -0.014642 Jy ! Component: 200 - total flux cleaned = -0.0141723 Jy ! Total flux subtracted in 200 components = -0.0141723 Jy ! Clean residual min=-0.006910 max=0.006883 Jy/beam ! Clean residual mean=-0.000008 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 0.413431 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 51 components and 0.413432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237602Jy sigma=0.001555 ! Fit after self-cal, rms=0.237596Jy sigma=0.001555 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237596Jy sigma=0.001555 ! Fit after self-cal, rms=0.221606Jy sigma=0.001403 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493268 Jy ! Component: 100 - total flux cleaned = -0.000318652 Jy ! Component: 150 - total flux cleaned = 2.32825e-05 Jy ! Component: 200 - total flux cleaned = 0.000285448 Jy ! Total flux subtracted in 200 components = 0.000285448 Jy ! Clean residual min=-0.006784 max=0.007370 Jy/beam ! Clean residual mean=-0.000007 rms=0.002058 Jy/beam ! Combined flux in latest and established models = 0.413717 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.413717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221236Jy sigma=0.001400 ! Fit after self-cal, rms=0.219485Jy sigma=0.001383 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.38 x 13.52 at -16.29 degrees (North through East) ! Clean map min=-0.0065403 max=0.37273 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219485Jy sigma=0.001383 ! Fit after self-cal, rms=0.220803Jy sigma=0.001375 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220803Jy sigma=0.001375 ! Fit after self-cal, rms=0.220436Jy sigma=0.001371 ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=13.37 mas, bpa=-16.4 degrees ! Estimated noise=1119.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325972 Jy ! Component: 100 - total flux cleaned = 0.00441374 Jy ! Component: 150 - total flux cleaned = 0.00515676 Jy ! Component: 200 - total flux cleaned = 0.00557897 Jy ! Total flux subtracted in 200 components = 0.00557897 Jy ! Clean residual min=-0.004798 max=0.005750 Jy/beam ! Clean residual mean=-0.000016 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.419296 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.419296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220296Jy sigma=0.001370 ! Fit after self-cal, rms=0.220205Jy sigma=0.001369 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220205Jy sigma=0.001369 ! Fit after self-cal, rms=0.222409Jy sigma=0.001361 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222409Jy sigma=0.001361 ! Fit after self-cal, rms=0.222404Jy sigma=0.001361 ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=13.26 mas, bpa=-16.44 degrees ! Estimated noise=1121.43 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205159 Jy ! Component: 100 - total flux cleaned = 0.00259479 Jy ! Component: 150 - total flux cleaned = 0.00317693 Jy ! Component: 200 - total flux cleaned = 0.00363354 Jy ! Total flux subtracted in 200 components = 0.00363354 Jy ! Clean residual min=-0.004870 max=0.005240 Jy/beam ! Clean residual mean=-0.000010 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.42293 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.42293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222337Jy sigma=0.001360 ! Fit after self-cal, rms=0.222341Jy sigma=0.001360 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.068 mas, bmaj=16.91 mas, bpa=4.428 degrees ! Estimated noise=1366.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021785 Jy ! Component: 100 - total flux cleaned = 0.00242428 Jy ! Component: 150 - total flux cleaned = 0.00254557 Jy ! Component: 200 - total flux cleaned = 0.00272661 Jy ! Total flux subtracted in 200 components = 0.00272661 Jy ! Clean residual min=-0.005089 max=0.004580 Jy/beam ! Clean residual mean=-0.000014 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.425656 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 84 components and 0.425656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222354Jy sigma=0.001360 ! Fit after self-cal, rms=0.222358Jy sigma=0.001360 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=14.04 mas, bpa=-16.63 degrees ! Estimated noise=1479.04 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.327739 Jy ! Component: 100 - total flux cleaned = 0.386578 Jy ! Component: 150 - total flux cleaned = 0.412268 Jy ! Component: 200 - total flux cleaned = 0.421227 Jy ! Total flux subtracted in 200 components = 0.421227 Jy ! Clean residual min=-0.008250 max=0.008969 Jy/beam ! Clean residual mean=-0.000005 rms=0.002331 Jy/beam ! Combined flux in latest and established models = 0.421227 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.421227 Jy ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=13.26 mas, bpa=-16.44 degrees ! Estimated noise=1121.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360789 Jy ! Component: 100 - total flux cleaned = 0.00225177 Jy ! Component: 150 - total flux cleaned = 0.00147709 Jy ! Component: 200 - total flux cleaned = 0.00118115 Jy ! Total flux subtracted in 200 components = 0.00118115 Jy ! Clean residual min=-0.005237 max=0.005826 Jy/beam ! Clean residual mean=-0.000012 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.422409 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 49 components and 0.422409 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.068 mas, bmaj=16.91 mas, bpa=4.428 degrees ! Estimated noise=1366.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578123 Jy ! Component: 100 - total flux cleaned = 0.000455991 Jy ! Component: 150 - total flux cleaned = 0.000720082 Jy ! Component: 200 - total flux cleaned = 0.000937378 Jy ! Total flux subtracted in 200 components = 0.000937378 Jy ! Clean residual min=-0.005226 max=0.004865 Jy/beam ! Clean residual mean=-0.000009 rms=0.001782 Jy/beam ! Combined flux in latest and established models = 0.423346 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.423346 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=13.26 mas, bpa=-16.44 degrees ! Estimated noise=1121.43 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000901299 Jy ! Component: 100 - total flux cleaned = -0.000975653 Jy ! Component: 150 - total flux cleaned = -0.00119679 Jy ! Component: 200 - total flux cleaned = -0.00137934 Jy ! Total flux subtracted in 200 components = -0.00137934 Jy ! Clean residual min=-0.004939 max=0.005383 Jy/beam ! Clean residual mean=-0.000008 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.421967 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.421967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222341Jy sigma=0.001360 ! Fit after self-cal, rms=0.222344Jy sigma=0.001360 wmodel J1939-1525_S_2002_01_31_yyk\_map.mod ! Writing 78 model components to file: J1939-1525_S_2002_01_31_yyk_map.mod wobs J1939-1525_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1939-1525_S_2002_01_31_yyk_uvs.fits wwins J1939-1525_S_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J1939-1525_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364409 Jy ! Component: 100 - total flux cleaned = 4.68066e-05 Jy ! Component: 150 - total flux cleaned = -9.21894e-05 Jy ! Component: 200 - total flux cleaned = -0.000286065 Jy ! Component: 250 - total flux cleaned = -0.000469056 Jy ! Component: 300 - total flux cleaned = -0.000526969 Jy ! Component: 350 - total flux cleaned = -0.000639037 Jy ! Component: 400 - total flux cleaned = -0.000744673 Jy ! Component: 450 - total flux cleaned = -0.000895306 Jy ! Component: 500 - total flux cleaned = -0.00123534 Jy ! Component: 550 - total flux cleaned = -0.00133023 Jy ! Component: 600 - total flux cleaned = -0.00151302 Jy ! Component: 650 - total flux cleaned = -0.00155702 Jy ! Component: 700 - total flux cleaned = -0.0016003 Jy ! Component: 750 - total flux cleaned = -0.00160019 Jy ! Component: 800 - total flux cleaned = -0.00151943 Jy ! Component: 850 - total flux cleaned = -0.00155862 Jy ! Component: 900 - total flux cleaned = -0.00144252 Jy ! Component: 950 - total flux cleaned = -0.00151734 Jy ! Component: 1000 - total flux cleaned = -0.00144288 Jy ! Component: 1050 - total flux cleaned = -0.00137135 Jy ! Component: 1100 - total flux cleaned = -0.00130136 Jy ! Component: 1150 - total flux cleaned = -0.00116475 Jy ! Component: 1200 - total flux cleaned = -0.00106342 Jy ! Component: 1250 - total flux cleaned = -0.000930926 Jy ! Component: 1300 - total flux cleaned = -0.000704994 Jy ! Component: 1350 - total flux cleaned = -0.000673344 Jy ! Component: 1400 - total flux cleaned = -0.000518335 Jy ! Component: 1450 - total flux cleaned = -0.000488364 Jy ! Component: 1500 - total flux cleaned = -0.000368718 Jy ! Component: 1550 - total flux cleaned = -0.000369372 Jy ! Component: 1600 - total flux cleaned = -0.000311251 Jy ! Component: 1650 - total flux cleaned = -0.000339508 Jy ! Component: 1700 - total flux cleaned = -0.000311052 Jy ! Component: 1750 - total flux cleaned = -0.000366257 Jy ! Component: 1800 - total flux cleaned = -0.00039355 Jy ! Component: 1850 - total flux cleaned = -0.000392984 Jy ! Component: 1900 - total flux cleaned = -0.000313766 Jy ! Component: 1950 - total flux cleaned = -0.000314291 Jy ! Component: 2000 - total flux cleaned = -0.000340236 Jy ! Total flux subtracted in 2048 components = -0.000314908 Jy ! Clean residual min=-0.001460 max=0.001360 Jy/beam ! Clean residual mean=0.000007 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.421652 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 227 components and 0.421652 Jy ![Exited script file: muppet] wmap "J1939-1525_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 13.26 at -16.44 degrees (North through East) ! Clean map min=-0.0041977 max=0.3758 Jy/beam ! Writing clean map to FITS file: J1939-1525_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.375804 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000552724 device "J1939-1525_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1939-1525_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.441233 0.441233 0.882467 1.76493 3.52987 7.05973 14.1195 28.2389 56.4779 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.375 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 13.26 at -16.44 degrees (North through East) ! Clean map min=-0.0041977 max=0.3758 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1939-1525_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1939-1525_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1939-1525_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 23:09:58 2007