! Started logfile: J1802-3940_S_2002_05_14_yyk_uvs.log on Tue Jun 26 23:03:39 2007 obs J1802-3940_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1802-3940_S_2002_05_14_yyk_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.576444 visibilities/baseline/integration-bin. ! Found source: J1802-3940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 5188 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1802-3940_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.18197 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=7.246 mas, bpa=-7.002 degrees ! Estimated noise=4159.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.814909 Jy ! Component: 100 - total flux cleaned = 1.09118 Jy ! Total flux subtracted in 100 components = 1.09118 Jy ! Clean residual min=-0.071735 max=0.141056 Jy/beam ! Clean residual mean=0.001678 rms=0.028933 Jy/beam ! Combined flux in latest and established models = 1.09118 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.09118 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.409467Jy sigma=0.002321 ! Fit after self-cal, rms=0.409130Jy sigma=0.002319 ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=7.246 mas, bpa=-7.002 degrees ! Estimated noise=4165.23 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=8.463 mas, bpa=-6.699 degrees ! Estimated noise=1822.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.260158 Jy ! Component: 100 - total flux cleaned = 0.350862 Jy ! Component: 150 - total flux cleaned = 0.38432 Jy ! Component: 200 - total flux cleaned = 0.395079 Jy ! Total flux subtracted in 200 components = 0.395079 Jy ! Clean residual min=-0.027470 max=0.049954 Jy/beam ! Clean residual mean=0.000746 rms=0.012498 Jy/beam ! Combined flux in latest and established models = 1.48626 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 53 components and 1.48626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315037Jy sigma=0.001628 ! Fit after self-cal, rms=0.315011Jy sigma=0.001627 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.019 x 8.463 at -6.699 degrees (North through East) ! Clean map min=-0.027401 max=0.97276 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.982749 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 0.92 ! LA 0.96 NL 1.12 OV 0.99 PT 1.02 ! SC 1.08 MK 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.974404 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00* ! LA 0.96 NL 1.24 OV 1.00 PT 0.98 ! SC 1.00 MK 1.10 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.966235 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 0.96 ! LA 1.00 NL 1.29 OV 1.06 PT 1.13 ! SC 0.98 MK 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.81403 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 3.51 KP 1.03 ! LA 0.82 NL 1.28 OV 0.92 PT 0.97 ! SC 0.95 MK 0.94 ! ! ! Fit before self-cal, rms=0.315011Jy sigma=0.001627 ! Fit after self-cal, rms=0.337600Jy sigma=0.002357 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337600Jy sigma=0.002357 ! Fit after self-cal, rms=0.337604Jy sigma=0.002357 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=8.437 mas, bpa=-6.921 degrees ! Estimated noise=1504.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.197256 Jy ! Component: 100 - total flux cleaned = -0.253406 Jy ! Component: 150 - total flux cleaned = -0.271675 Jy ! Component: 200 - total flux cleaned = -0.276946 Jy ! Total flux subtracted in 200 components = -0.276946 Jy ! Clean residual min=-0.018939 max=0.017270 Jy/beam ! Clean residual mean=0.000302 rms=0.005122 Jy/beam ! Combined flux in latest and established models = 1.20932 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 79 components and 1.20932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308114Jy sigma=0.001783 ! Fit after self-cal, rms=0.308111Jy sigma=0.001783 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308111Jy sigma=0.001783 ! Fit after self-cal, rms=0.294446Jy sigma=0.001682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041038 Jy ! Component: 100 - total flux cleaned = 0.00408715 Jy ! Component: 150 - total flux cleaned = 0.00395619 Jy ! Component: 200 - total flux cleaned = 0.00394517 Jy ! Total flux subtracted in 200 components = 0.00394517 Jy ! Clean residual min=-0.018808 max=0.017289 Jy/beam ! Clean residual mean=0.000387 rms=0.005188 Jy/beam ! Combined flux in latest and established models = 1.21326 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 1.21326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293573Jy sigma=0.001681 ! Fit after self-cal, rms=0.293008Jy sigma=0.001678 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.031 x 8.437 at -6.921 degrees (North through East) ! Clean map min=-0.018834 max=0.82949 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293008Jy sigma=0.001678 ! Fit after self-cal, rms=0.249617Jy sigma=0.001181 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249617Jy sigma=0.001181 ! Fit after self-cal, rms=0.249523Jy sigma=0.001180 ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=8.49 mas, bpa=-6.803 degrees ! Estimated noise=1483.65 mJy/beam. ! Added new window around map position (5.5, 23.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.006314 Jy ! Component: 100 - total flux cleaned = 0.00629474 Jy ! Component: 150 - total flux cleaned = 0.0066155 Jy ! Component: 200 - total flux cleaned = 0.0066174 Jy ! Total flux subtracted in 200 components = 0.0066174 Jy ! Clean residual min=-0.005488 max=0.006019 Jy/beam ! Clean residual mean=0.000071 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 1.21988 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 1.21988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248964Jy sigma=0.001177 ! Fit after self-cal, rms=0.248905Jy sigma=0.001177 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248905Jy sigma=0.001177 ! Fit after self-cal, rms=0.246532Jy sigma=0.001173 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246532Jy sigma=0.001173 ! Fit after self-cal, rms=0.246507Jy sigma=0.001173 ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=8.466 mas, bpa=-6.741 degrees ! Estimated noise=1481.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335529 Jy ! Component: 100 - total flux cleaned = 0.00369654 Jy ! Component: 150 - total flux cleaned = 0.00389611 Jy ! Component: 200 - total flux cleaned = 0.00398737 Jy ! Total flux subtracted in 200 components = 0.00398737 Jy ! Clean residual min=-0.004985 max=0.005354 Jy/beam ! Clean residual mean=0.000048 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 1.22387 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 101 components and 1.22387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246308Jy sigma=0.001172 ! Fit after self-cal, rms=0.246289Jy sigma=0.001172 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.83 mas, bmaj=33.76 mas, bpa=-1.212 degrees ! Estimated noise=1906.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107812 Jy ! Component: 100 - total flux cleaned = 0.00115152 Jy ! Component: 150 - total flux cleaned = 0.00118036 Jy ! Component: 200 - total flux cleaned = 0.0012313 Jy ! Total flux subtracted in 200 components = 0.0012313 Jy ! Clean residual min=-0.003269 max=0.005891 Jy/beam ! Clean residual mean=0.000092 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 1.2251 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 1.2251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246289Jy sigma=0.001172 ! Fit after self-cal, rms=0.246279Jy sigma=0.001172 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=7.076 mas, bpa=-6.947 degrees ! Estimated noise=3686.78 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.726301 Jy ! Component: 100 - total flux cleaned = 0.966171 Jy ! Component: 150 - total flux cleaned = 1.07848 Jy ! Component: 200 - total flux cleaned = 1.13373 Jy ! Total flux subtracted in 200 components = 1.13373 Jy ! Clean residual min=-0.024783 max=0.023532 Jy/beam ! Clean residual mean=0.000266 rms=0.007597 Jy/beam ! Combined flux in latest and established models = 1.13373 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 1.13373 Jy ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=8.466 mas, bpa=-6.741 degrees ! Estimated noise=1481.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499082 Jy ! Component: 100 - total flux cleaned = 0.0691526 Jy ! Component: 150 - total flux cleaned = 0.078292 Jy ! Component: 200 - total flux cleaned = 0.0828557 Jy ! Total flux subtracted in 200 components = 0.0828557 Jy ! Clean residual min=-0.005414 max=0.005695 Jy/beam ! Clean residual mean=0.000065 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 1.21659 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 110 components and 1.21659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.83 mas, bmaj=33.76 mas, bpa=-1.212 degrees ! Estimated noise=1906.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349951 Jy ! Component: 100 - total flux cleaned = 0.00392776 Jy ! Component: 150 - total flux cleaned = 0.00415132 Jy ! Component: 200 - total flux cleaned = 0.00435049 Jy ! Total flux subtracted in 200 components = 0.00435049 Jy ! Clean residual min=-0.004448 max=0.005775 Jy/beam ! Clean residual mean=0.000115 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 1.22094 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 1.22094 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=8.466 mas, bpa=-6.741 degrees ! Estimated noise=1481.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.11877e-05 Jy ! Component: 100 - total flux cleaned = 5.47768e-06 Jy ! Component: 150 - total flux cleaned = -7.17982e-05 Jy ! Component: 200 - total flux cleaned = -6.96694e-05 Jy ! Total flux subtracted in 200 components = -6.96694e-05 Jy ! Clean residual min=-0.005098 max=0.004844 Jy/beam ! Clean residual mean=0.000054 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 1.22087 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 139 components and 1.22087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246186Jy sigma=0.001171 ! Fit after self-cal, rms=0.246147Jy sigma=0.001171 wmodel J1802-3940_S_2002_05_14_yyk\_map.mod ! Writing 139 model components to file: J1802-3940_S_2002_05_14_yyk_map.mod wobs J1802-3940_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1802-3940_S_2002_05_14_yyk_uvs.fits wwins J1802-3940_S_2002_05_14_yyk\_map.win ! wwins: Wrote 3 windows to J1802-3940_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000322523 Jy ! Component: 100 - total flux cleaned = 0.000358847 Jy ! Component: 150 - total flux cleaned = 0.000355348 Jy ! Component: 200 - total flux cleaned = 0.000418572 Jy ! Component: 250 - total flux cleaned = 0.000174605 Jy ! Component: 300 - total flux cleaned = -5.50698e-05 Jy ! Component: 350 - total flux cleaned = -0.000165034 Jy ! Component: 400 - total flux cleaned = -1.03136e-05 Jy ! Component: 450 - total flux cleaned = 0.000138301 Jy ! Component: 500 - total flux cleaned = 0.000234924 Jy ! Component: 550 - total flux cleaned = 0.000374399 Jy ! Component: 600 - total flux cleaned = 0.000463881 Jy ! Component: 650 - total flux cleaned = 0.000552036 Jy ! Component: 700 - total flux cleaned = 0.000719976 Jy ! Component: 750 - total flux cleaned = 0.000966493 Jy ! Component: 800 - total flux cleaned = 0.00124664 Jy ! Component: 850 - total flux cleaned = 0.00163557 Jy ! Component: 900 - total flux cleaned = 0.00186332 Jy ! Component: 950 - total flux cleaned = 0.00212395 Jy ! Component: 1000 - total flux cleaned = 0.00245331 Jy ! Component: 1050 - total flux cleaned = 0.00277647 Jy ! Component: 1100 - total flux cleaned = 0.00312785 Jy ! Component: 1150 - total flux cleaned = 0.00333484 Jy ! Component: 1200 - total flux cleaned = 0.00360621 Jy ! Component: 1250 - total flux cleaned = 0.00387259 Jy ! Component: 1300 - total flux cleaned = 0.00410205 Jy ! Component: 1350 - total flux cleaned = 0.0044246 Jy ! Component: 1400 - total flux cleaned = 0.00477535 Jy ! Component: 1450 - total flux cleaned = 0.00505905 Jy ! Component: 1500 - total flux cleaned = 0.005371 Jy ! Component: 1550 - total flux cleaned = 0.0056493 Jy ! Component: 1600 - total flux cleaned = 0.00595482 Jy ! Component: 1650 - total flux cleaned = 0.00622714 Jy ! Component: 1700 - total flux cleaned = 0.00646755 Jy ! Component: 1750 - total flux cleaned = 0.00673553 Jy ! Component: 1800 - total flux cleaned = 0.00697196 Jy ! Component: 1850 - total flux cleaned = 0.00708947 Jy ! Component: 1900 - total flux cleaned = 0.00717752 Jy ! Component: 1950 - total flux cleaned = 0.00726546 Jy ! Component: 2000 - total flux cleaned = 0.00741196 Jy ! Total flux subtracted in 2048 components = 0.00744171 Jy ! Clean residual min=-0.001707 max=0.001770 Jy/beam ! Clean residual mean=0.000003 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 1.22831 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 260 components and 1.22831 Jy ![Exited script file: muppet] wmap "J1802-3940_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.041 x 8.466 at -6.741 degrees (North through East) ! Clean map min=-0.0033696 max=0.85363 Jy/beam ! Writing clean map to FITS file: J1802-3940_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.85363 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000564976 device "J1802-3940_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1802-3940_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.198556 0.198556 0.397111 0.794222 1.58844 3.17689 6.35378 12.7076 25.4151 50.8302 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.853 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.041 x 8.466 at -6.741 degrees (North through East) ! Clean map min=-0.0033696 max=0.85363 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1802-3940_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1802-3940_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1802-3940_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 23:03:45 2007