! Started logfile: J1733-3722_S_2002_05_14_yyk_uvs.log on Tue Jun 26 23:00:12 2007 obs J1733-3722_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1733-3722_S_2002_05_14_yyk_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.746111 visibilities/baseline/integration-bin. ! Found source: J1733-3722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 5372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1733-3722_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.528657 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=7.281 mas, bpa=-10.51 degrees ! Estimated noise=2842.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.247328 Jy ! Component: 100 - total flux cleaned = 0.395249 Jy ! Total flux subtracted in 100 components = 0.395249 Jy ! Clean residual min=-0.031566 max=0.058872 Jy/beam ! Clean residual mean=-0.000267 rms=0.016081 Jy/beam ! Combined flux in latest and established models = 0.395249 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 84 model components to the UV plane model. ! The established model now contains 84 components and 0.395249 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.379331Jy sigma=0.002039 ! Fit after self-cal, rms=0.378488Jy sigma=0.002036 ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=7.281 mas, bpa=-10.51 degrees ! Estimated noise=2842.47 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=8.732 mas, bpa=-11.43 degrees ! Estimated noise=1813.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.194676 Jy ! Component: 100 - total flux cleaned = 0.301945 Jy ! Component: 150 - total flux cleaned = 0.367334 Jy ! Component: 200 - total flux cleaned = 0.409267 Jy ! Total flux subtracted in 200 components = 0.409267 Jy ! Clean residual min=-0.015353 max=0.017047 Jy/beam ! Clean residual mean=0.000087 rms=0.005988 Jy/beam ! Combined flux in latest and established models = 0.804517 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 150 model components to the UV plane model. ! The established model now contains 229 components and 0.804517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316767Jy sigma=0.001540 ! Fit after self-cal, rms=0.316578Jy sigma=0.001540 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 8.732 at -11.43 degrees (North through East) ! Clean map min=-0.015018 max=0.1802 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.316578Jy sigma=0.001540 ! Fit after self-cal, rms=0.316731Jy sigma=0.001541 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316731Jy sigma=0.001541 ! Fit after self-cal, rms=0.316731Jy sigma=0.001541 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=8.735 mas, bpa=-11.39 degrees ! Estimated noise=1814.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210472 Jy ! Component: 100 - total flux cleaned = 0.031746 Jy ! Component: 150 - total flux cleaned = 0.0387024 Jy ! Component: 200 - total flux cleaned = 0.0445759 Jy ! Total flux subtracted in 200 components = 0.0445759 Jy ! Clean residual min=-0.006171 max=0.006198 Jy/beam ! Clean residual mean=0.000251 rms=0.002657 Jy/beam ! Combined flux in latest and established models = 0.849093 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 91 model components to the UV plane model. ! The established model now contains 310 components and 0.849093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313638Jy sigma=0.001524 ! Fit after self-cal, rms=0.313629Jy sigma=0.001523 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313629Jy sigma=0.001523 ! Fit after self-cal, rms=0.310475Jy sigma=0.001502 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937988 Jy ! Component: 100 - total flux cleaned = 0.0113253 Jy ! Component: 150 - total flux cleaned = 0.0109185 Jy ! Component: 200 - total flux cleaned = 0.0128658 Jy ! Total flux subtracted in 200 components = 0.0128658 Jy ! Clean residual min=-0.004627 max=0.004620 Jy/beam ! Clean residual mean=0.000288 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 0.861959 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 66 model components to the UV plane model. ! The established model now contains 374 components and 0.861958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309217Jy sigma=0.001496 ! Fit after self-cal, rms=0.308843Jy sigma=0.001494 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.029 x 8.735 at -11.39 degrees (North through East) ! Clean map min=-0.012859 max=0.17094 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308843Jy sigma=0.001494 ! Fit after self-cal, rms=0.308843Jy sigma=0.001494 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308843Jy sigma=0.001494 ! Fit after self-cal, rms=0.308718Jy sigma=0.001493 ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=8.735 mas, bpa=-11.39 degrees ! Estimated noise=1814.88 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139244 Jy ! Component: 100 - total flux cleaned = 0.00177876 Jy ! Component: 150 - total flux cleaned = 0.00178222 Jy ! Component: 200 - total flux cleaned = 0.00118164 Jy ! Total flux subtracted in 200 components = 0.00118164 Jy ! Clean residual min=-0.003690 max=0.003713 Jy/beam ! Clean residual mean=0.000260 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.86314 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 72 model components to the UV plane model. ! The established model now contains 435 components and 0.86314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308020Jy sigma=0.001490 ! Fit after self-cal, rms=0.307961Jy sigma=0.001490 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307961Jy sigma=0.001490 ! Fit after self-cal, rms=0.313074Jy sigma=0.001484 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313074Jy sigma=0.001484 ! Fit after self-cal, rms=0.313071Jy sigma=0.001484 ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.776 mas, bpa=-11.89 degrees ! Estimated noise=1852.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502681 Jy ! Component: 100 - total flux cleaned = -0.00453346 Jy ! Component: 150 - total flux cleaned = -0.00708639 Jy ! Component: 200 - total flux cleaned = -0.00838278 Jy ! Total flux subtracted in 200 components = -0.00838278 Jy ! Clean residual min=-0.003793 max=0.003750 Jy/beam ! Clean residual mean=-0.000034 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 0.854757 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 78 model components to the UV plane model. ! The established model now contains 508 components and 0.854757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312110Jy sigma=0.001479 ! Fit after self-cal, rms=0.312093Jy sigma=0.001479 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.106 mas, bmaj=27.64 mas, bpa=-5.169 degrees ! Estimated noise=2405.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159665 Jy ! Component: 100 - total flux cleaned = -0.00320246 Jy ! Component: 150 - total flux cleaned = -0.00245206 Jy ! Component: 200 - total flux cleaned = -0.00292875 Jy ! Total flux subtracted in 200 components = -0.00292875 Jy ! Clean residual min=-0.002707 max=0.002675 Jy/beam ! Clean residual mean=-0.000015 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.851828 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 92 model components to the UV plane model. ! The established model now contains 595 components and 0.851829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311785Jy sigma=0.001478 ! Fit after self-cal, rms=0.311759Jy sigma=0.001478 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.282 mas, bmaj=7.298 mas, bpa=-10.9 degrees ! Estimated noise=2896.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.256939 Jy ! Component: 100 - total flux cleaned = 0.40877 Jy ! Component: 150 - total flux cleaned = 0.511247 Jy ! Component: 200 - total flux cleaned = 0.587223 Jy ! Total flux subtracted in 200 components = 0.587223 Jy ! Clean residual min=-0.025910 max=0.033519 Jy/beam ! Clean residual mean=-0.000134 rms=0.010333 Jy/beam ! Combined flux in latest and established models = 0.587223 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 133 model components to the UV plane model. ! The established model now contains 133 components and 0.587223 Jy ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.776 mas, bpa=-11.89 degrees ! Estimated noise=1852.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.119241 Jy ! Component: 100 - total flux cleaned = 0.189336 Jy ! Component: 150 - total flux cleaned = 0.233386 Jy ! Component: 200 - total flux cleaned = 0.247088 Jy ! Total flux subtracted in 200 components = 0.247088 Jy ! Clean residual min=-0.012695 max=0.012755 Jy/beam ! Clean residual mean=-0.000083 rms=0.005385 Jy/beam ! Combined flux in latest and established models = 0.834311 Jy ! Adding 135 model components to the UV plane model. ! The established model now contains 247 components and 0.834311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.106 mas, bmaj=27.64 mas, bpa=-5.169 degrees ! Estimated noise=2405.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190179 Jy ! Component: 100 - total flux cleaned = 0.0243446 Jy ! Component: 150 - total flux cleaned = 0.0329192 Jy ! Component: 200 - total flux cleaned = 0.0370319 Jy ! Total flux subtracted in 200 components = 0.0370319 Jy ! Clean residual min=-0.006649 max=0.006654 Jy/beam ! Clean residual mean=-0.000042 rms=0.003718 Jy/beam ! Combined flux in latest and established models = 0.871343 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 348 components and 0.871343 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.776 mas, bpa=-11.89 degrees ! Estimated noise=1852.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176299 Jy ! Component: 100 - total flux cleaned = 0.00353565 Jy ! Component: 150 - total flux cleaned = 0.00282157 Jy ! Component: 200 - total flux cleaned = 0.00145259 Jy ! Total flux subtracted in 200 components = 0.00145259 Jy ! Clean residual min=-0.004044 max=0.004082 Jy/beam ! Clean residual mean=0.000012 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 0.872796 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 62 model components to the UV plane model. ! The established model now contains 408 components and 0.872796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312492Jy sigma=0.001480 ! Fit after self-cal, rms=0.312388Jy sigma=0.001480 wmodel J1733-3722_S_2002_05_14_yyk\_map.mod ! Writing 408 model components to file: J1733-3722_S_2002_05_14_yyk_map.mod wobs J1733-3722_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1733-3722_S_2002_05_14_yyk_uvs.fits wwins J1733-3722_S_2002_05_14_yyk\_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1733-3722_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 8.776 at -11.89 degrees (North through East) ! Clean map min=-0.0099925 max=0.17406 Jy/beam ! Writing clean map to FITS file: J1733-3722_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.174057 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00172975 device "J1733-3722_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1733-3722_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.98134 2.98134 5.96269 11.9254 23.8508 47.7015 95.403 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0051 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.174 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 8.776 at -11.89 degrees (North through East) ! Clean map min=-0.0099925 max=0.17406 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1733-3722_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1733-3722_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1733-3722_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 23:00:18 2007