! Started logfile: J1607-3331_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:58:10 2007 obs J1607-3331_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1607-3331_S_2002_01_31_yyk_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.741389 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 10676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1607-3331_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.283312 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.271 mas, bmaj=6.203 mas, bpa=1.224 degrees ! Estimated noise=2235.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.172209 Jy ! Component: 100 - total flux cleaned = 0.203653 Jy ! Total flux subtracted in 100 components = 0.203653 Jy ! Clean residual min=-0.010886 max=0.017533 Jy/beam ! Clean residual mean=-0.000046 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 0.203653 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.203653 Jy ! ! Correcting IF 1. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.189466Jy sigma=0.001240 ! Fit after self-cal, rms=0.189250Jy sigma=0.001239 ! Inverting map and beam ! Estimated beam: bmin=2.271 mas, bmaj=6.203 mas, bpa=1.224 degrees ! Estimated noise=2235.28 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=8.226 mas, bpa=-3.322 degrees ! Estimated noise=1028.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 7.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.02458 Jy ! Component: 100 - total flux cleaned = 0.0346728 Jy ! Component: 150 - total flux cleaned = 0.0378949 Jy ! Component: 200 - total flux cleaned = 0.038453 Jy ! Total flux subtracted in 200 components = 0.038453 Jy ! Clean residual min=-0.005480 max=0.010533 Jy/beam ! Clean residual mean=0.000005 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.242106 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 65 components and 0.242106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187045Jy sigma=0.001223 ! Fit after self-cal, rms=0.186916Jy sigma=0.001223 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 8.226 at -3.322 degrees (North through East) ! Clean map min=-0.0057592 max=0.19762 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.991485 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.10 HN 1.00* KP 0.92 ! LA 1.00 MK 0.96 NL 1.16 OV 0.98 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.993699 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.00* KP 1.00* ! LA 1.00 MK 1.07 NL 1.13 OV 0.95 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.186916Jy sigma=0.001223 ! Fit after self-cal, rms=0.186914Jy sigma=0.001220 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186914Jy sigma=0.001220 ! Fit after self-cal, rms=0.186911Jy sigma=0.001220 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=8.286 mas, bpa=-3.407 degrees ! Estimated noise=1026.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000707021 Jy ! Component: 100 - total flux cleaned = -0.00112737 Jy ! Component: 150 - total flux cleaned = -0.0014025 Jy ! Component: 200 - total flux cleaned = -0.00165197 Jy ! Total flux subtracted in 200 components = -0.00165197 Jy ! Clean residual min=-0.005670 max=0.005438 Jy/beam ! Clean residual mean=0.000013 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.240454 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.240454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186833Jy sigma=0.001219 ! Fit after self-cal, rms=0.186822Jy sigma=0.001219 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186822Jy sigma=0.001219 ! Fit after self-cal, rms=0.184340Jy sigma=0.001202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137964 Jy ! Component: 100 - total flux cleaned = 0.00111243 Jy ! Component: 150 - total flux cleaned = 0.000982874 Jy ! Component: 200 - total flux cleaned = 0.000806875 Jy ! Total flux subtracted in 200 components = 0.000806875 Jy ! Clean residual min=-0.005004 max=0.005191 Jy/beam ! Clean residual mean=-0.000001 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.241261 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.241261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184271Jy sigma=0.001202 ! Fit after self-cal, rms=0.183904Jy sigma=0.001199 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 8.286 at -3.407 degrees (North through East) ! Clean map min=-0.0057752 max=0.19746 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183904Jy sigma=0.001199 ! Fit after self-cal, rms=0.182781Jy sigma=0.001196 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182781Jy sigma=0.001196 ! Fit after self-cal, rms=0.182725Jy sigma=0.001195 ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.278 mas, bpa=-3.355 degrees ! Estimated noise=1020.62 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171742 Jy ! Component: 100 - total flux cleaned = 9.57224e-05 Jy ! Component: 150 - total flux cleaned = -7.31507e-05 Jy ! Component: 200 - total flux cleaned = -0.000328535 Jy ! Total flux subtracted in 200 components = -0.000328535 Jy ! Clean residual min=-0.004162 max=0.005121 Jy/beam ! Clean residual mean=-0.000101 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.240933 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.240933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182685Jy sigma=0.001195 ! Fit after self-cal, rms=0.182679Jy sigma=0.001195 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182679Jy sigma=0.001195 ! Fit after self-cal, rms=0.184292Jy sigma=0.001192 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184292Jy sigma=0.001192 ! Fit after self-cal, rms=0.184305Jy sigma=0.001192 ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.325 mas, bpa=-3.418 degrees ! Estimated noise=1024.65 mJy/beam. ! Added new window around map position (61.5, -59.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469862 Jy ! Component: 100 - total flux cleaned = 0.00524019 Jy ! Component: 150 - total flux cleaned = 0.00531055 Jy ! Component: 200 - total flux cleaned = 0.00536637 Jy ! Total flux subtracted in 200 components = 0.00536637 Jy ! Clean residual min=-0.003531 max=0.003249 Jy/beam ! Clean residual mean=-0.000088 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.246299 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.246299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184194Jy sigma=0.001192 ! Fit after self-cal, rms=0.184195Jy sigma=0.001192 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.116 mas, bmaj=26.27 mas, bpa=3.668 degrees ! Estimated noise=1276.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.48426e-05 Jy ! Component: 100 - total flux cleaned = 0.000172909 Jy ! Component: 150 - total flux cleaned = 0.000385413 Jy ! Component: 200 - total flux cleaned = 0.000526486 Jy ! Total flux subtracted in 200 components = 0.000526485 Jy ! Clean residual min=-0.003878 max=0.003906 Jy/beam ! Clean residual mean=-0.000161 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.246825 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 145 components and 0.246825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184193Jy sigma=0.001192 ! Fit after self-cal, rms=0.184200Jy sigma=0.001192 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.279 mas, bmaj=6.197 mas, bpa=1.201 degrees ! Estimated noise=2228.65 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.174456 Jy ! Component: 100 - total flux cleaned = 0.20666 Jy ! Component: 150 - total flux cleaned = 0.222046 Jy ! Component: 200 - total flux cleaned = 0.232359 Jy ! Total flux subtracted in 200 components = 0.232359 Jy ! Clean residual min=-0.007722 max=0.007656 Jy/beam ! Clean residual mean=-0.000030 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.232359 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.232359 Jy ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.325 mas, bpa=-3.418 degrees ! Estimated noise=1024.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011992 Jy ! Component: 100 - total flux cleaned = 0.0146587 Jy ! Component: 150 - total flux cleaned = 0.0147767 Jy ! Component: 200 - total flux cleaned = 0.0149895 Jy ! Total flux subtracted in 200 components = 0.0149895 Jy ! Clean residual min=-0.003820 max=0.004617 Jy/beam ! Clean residual mean=-0.000101 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.247348 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 82 components and 0.247348 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.116 mas, bmaj=26.27 mas, bpa=3.668 degrees ! Estimated noise=1276.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.01113e-05 Jy ! Component: 100 - total flux cleaned = -2.19342e-05 Jy ! Component: 150 - total flux cleaned = -2.1667e-05 Jy ! Component: 200 - total flux cleaned = -1.79641e-05 Jy ! Total flux subtracted in 200 components = -1.79641e-05 Jy ! Clean residual min=-0.003798 max=0.003606 Jy/beam ! Clean residual mean=-0.000170 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.24733 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 0.24733 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.325 mas, bpa=-3.418 degrees ! Estimated noise=1024.65 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358732 Jy ! Component: 100 - total flux cleaned = -0.000289994 Jy ! Component: 150 - total flux cleaned = -0.000285228 Jy ! Component: 200 - total flux cleaned = -0.000280898 Jy ! Total flux subtracted in 200 components = -0.000280898 Jy ! Clean residual min=-0.003528 max=0.004039 Jy/beam ! Clean residual mean=-0.000093 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.247049 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.247049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184219Jy sigma=0.001192 ! Fit after self-cal, rms=0.184215Jy sigma=0.001192 wmodel J1607-3331_S_2002_01_31_yyk\_map.mod ! Writing 113 model components to file: J1607-3331_S_2002_01_31_yyk_map.mod wobs J1607-3331_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1607-3331_S_2002_01_31_yyk_uvs.fits wwins J1607-3331_S_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J1607-3331_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104588 Jy ! Component: 100 - total flux cleaned = -0.0017078 Jy ! Component: 150 - total flux cleaned = -0.00227621 Jy ! Component: 200 - total flux cleaned = -0.00238258 Jy ! Component: 250 - total flux cleaned = -0.00259286 Jy ! Component: 300 - total flux cleaned = -0.00284897 Jy ! Component: 350 - total flux cleaned = -0.00324557 Jy ! Component: 400 - total flux cleaned = -0.00348604 Jy ! Component: 450 - total flux cleaned = -0.00362774 Jy ! Component: 500 - total flux cleaned = -0.00385678 Jy ! Component: 550 - total flux cleaned = -0.00412423 Jy ! Component: 600 - total flux cleaned = -0.00429792 Jy ! Component: 650 - total flux cleaned = -0.00455386 Jy ! Component: 700 - total flux cleaned = -0.00476255 Jy ! Component: 750 - total flux cleaned = -0.00492575 Jy ! Component: 800 - total flux cleaned = -0.00512631 Jy ! Component: 850 - total flux cleaned = -0.00528322 Jy ! Component: 900 - total flux cleaned = -0.00547584 Jy ! Component: 950 - total flux cleaned = -0.00562709 Jy ! Component: 1000 - total flux cleaned = -0.00581263 Jy ! Component: 1050 - total flux cleaned = -0.00595836 Jy ! Component: 1100 - total flux cleaned = -0.00610143 Jy ! Component: 1150 - total flux cleaned = -0.00624277 Jy ! Component: 1200 - total flux cleaned = -0.00634734 Jy ! Component: 1250 - total flux cleaned = -0.00658602 Jy ! Component: 1300 - total flux cleaned = -0.00668682 Jy ! Component: 1350 - total flux cleaned = -0.00681909 Jy ! Component: 1400 - total flux cleaned = -0.00691745 Jy ! Component: 1450 - total flux cleaned = -0.0071424 Jy ! Component: 1500 - total flux cleaned = -0.00726911 Jy ! Component: 1550 - total flux cleaned = -0.00739493 Jy ! Component: 1600 - total flux cleaned = -0.00761167 Jy ! Component: 1650 - total flux cleaned = -0.00779498 Jy ! Component: 1700 - total flux cleaned = -0.00797597 Jy ! Component: 1750 - total flux cleaned = -0.00806528 Jy ! Component: 1800 - total flux cleaned = -0.0082121 Jy ! Component: 1850 - total flux cleaned = -0.00844478 Jy ! Component: 1900 - total flux cleaned = -0.00856003 Jy ! Component: 1950 - total flux cleaned = -0.00870195 Jy ! Component: 2000 - total flux cleaned = -0.00884291 Jy ! Total flux subtracted in 2048 components = -0.00900977 Jy ! Clean residual min=-0.001671 max=0.001615 Jy/beam ! Clean residual mean=-0.000067 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.23804 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 241 components and 0.23804 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 8.325 at -3.418 degrees (North through East) ! Clean map min=-0.0039868 max=0.19634 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.19634 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000572728 device "J1607-3331_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1607-3331_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.875108 0.875108 1.75022 3.50043 7.00086 14.0017 28.0035 56.0069 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.196 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 8.325 at -3.418 degrees (North through East) ! Clean map min=-0.0039868 max=0.19634 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1607-3331_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1607-3331_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1607-3331_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:58:17 2007