! Started logfile: J1438-2204_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:58:46 2007 obs J1438-2204_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1438-2204_X_2002_01_31_yyk_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.607407 visibilities/baseline/integration-bin. ! Found source: J1438-2204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 10168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J1438-2204_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.583524 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6309 mas, bmaj=1.62 mas, bpa=5.35 degrees ! Estimated noise=1662.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.455218 Jy ! Component: 100 - total flux cleaned = 0.53225 Jy ! Total flux subtracted in 100 components = 0.53225 Jy ! Clean residual min=-0.028361 max=0.027464 Jy/beam ! Clean residual mean=-0.000043 rms=0.006198 Jy/beam ! Combined flux in latest and established models = 0.53225 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.53225 Jy ! ! Correcting IF 1. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.204540Jy sigma=0.001738 ! Fit after self-cal, rms=0.204376Jy sigma=0.001737 ! Inverting map and beam ! Estimated beam: bmin=0.6309 mas, bmaj=1.62 mas, bpa=5.35 degrees ! Estimated noise=1662.69 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8706 mas, bmaj=2.035 mas, bpa=0.4444 degrees ! Estimated noise=876.036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.039169 Jy ! Component: 100 - total flux cleaned = 0.0515332 Jy ! Component: 150 - total flux cleaned = 0.0549246 Jy ! Component: 200 - total flux cleaned = 0.0549393 Jy ! Total flux subtracted in 200 components = 0.0549393 Jy ! Clean residual min=-0.021876 max=0.017472 Jy/beam ! Clean residual mean=0.000136 rms=0.005743 Jy/beam ! Combined flux in latest and established models = 0.587189 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.587189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199191Jy sigma=0.001690 ! Fit after self-cal, rms=0.199190Jy sigma=0.001690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8706 x 2.035 at 0.4444 degrees (North through East) ! Clean map min=-0.020743 max=0.54436 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01007 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.91 HN 1.00* KP 1.02 ! LA 1.13 MK 1.00 NL 1.00* OV 0.96 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02041 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.91 HN 1.00* KP 0.96 ! LA 1.11 MK 0.98 NL 1.00* OV 0.92 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990305 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.87 HN 1.00* KP 0.98 ! LA 1.15 MK 1.02 NL 1.00* OV 0.97 ! PT 1.05 SC 1.09 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.980727 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.87 HN 1.00* KP 1.05 ! LA 1.13 MK 1.04 NL 1.00* OV 0.99 ! PT 1.14 SC 1.02 ! ! ! Fit before self-cal, rms=0.199190Jy sigma=0.001690 ! Fit after self-cal, rms=0.192732Jy sigma=0.001611 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192732Jy sigma=0.001611 ! Fit after self-cal, rms=0.192733Jy sigma=0.001611 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8819 mas, bmaj=2.039 mas, bpa=0.4236 degrees ! Estimated noise=877.554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.8, 1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.012593 Jy ! Component: 100 - total flux cleaned = 0.0171624 Jy ! Component: 150 - total flux cleaned = 0.0178677 Jy ! Component: 200 - total flux cleaned = 0.0182197 Jy ! Total flux subtracted in 200 components = 0.0182197 Jy ! Clean residual min=-0.005849 max=0.006771 Jy/beam ! Clean residual mean=-0.000014 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.605409 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.605409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192170Jy sigma=0.001604 ! Fit after self-cal, rms=0.192142Jy sigma=0.001604 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192142Jy sigma=0.001604 ! Fit after self-cal, rms=0.156447Jy sigma=0.001329 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179884 Jy ! Component: 100 - total flux cleaned = 0.000964643 Jy ! Component: 150 - total flux cleaned = 0.000621177 Jy ! Component: 200 - total flux cleaned = 0.000830338 Jy ! Total flux subtracted in 200 components = 0.000830338 Jy ! Clean residual min=-0.007367 max=0.005331 Jy/beam ! Clean residual mean=-0.000014 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.606239 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.606239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154589Jy sigma=0.001315 ! Fit after self-cal, rms=0.147096Jy sigma=0.001260 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8819 x 2.039 at 0.4236 degrees (North through East) ! Clean map min=-0.005546 max=0.56168 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147096Jy sigma=0.001260 ! Fit after self-cal, rms=0.144244Jy sigma=0.001244 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144244Jy sigma=0.001244 ! Fit after self-cal, rms=0.142325Jy sigma=0.001229 ! Inverting map and beam ! Estimated beam: bmin=0.863 mas, bmaj=2.019 mas, bpa=1.463 degrees ! Estimated noise=869.733 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137017 Jy ! Component: 100 - total flux cleaned = 0.00148763 Jy ! Component: 150 - total flux cleaned = 0.00189553 Jy ! Component: 200 - total flux cleaned = 0.00234024 Jy ! Total flux subtracted in 200 components = 0.00234024 Jy ! Clean residual min=-0.004167 max=0.003667 Jy/beam ! Clean residual mean=-0.000003 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.60858 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.608579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142127Jy sigma=0.001227 ! Fit after self-cal, rms=0.141494Jy sigma=0.001222 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141494Jy sigma=0.001222 ! Fit after self-cal, rms=0.140937Jy sigma=0.001216 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140937Jy sigma=0.001216 ! Fit after self-cal, rms=0.140757Jy sigma=0.001214 ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=2.018 mas, bpa=1.59 degrees ! Estimated noise=868.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062517 Jy ! Component: 100 - total flux cleaned = 0.00096914 Jy ! Component: 150 - total flux cleaned = 0.00126286 Jy ! Component: 200 - total flux cleaned = 0.00145765 Jy ! Total flux subtracted in 200 components = 0.00145765 Jy ! Clean residual min=-0.004118 max=0.003162 Jy/beam ! Clean residual mean=-0.000007 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.610037 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.610037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140681Jy sigma=0.001214 ! Fit after self-cal, rms=0.140592Jy sigma=0.001213 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=6.043 mas, bpa=16.65 degrees ! Estimated noise=1118.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113622 Jy ! Component: 100 - total flux cleaned = 0.00119675 Jy ! Component: 150 - total flux cleaned = 0.00119884 Jy ! Component: 200 - total flux cleaned = 0.00115304 Jy ! Total flux subtracted in 200 components = 0.00115304 Jy ! Clean residual min=-0.003177 max=0.002864 Jy/beam ! Clean residual mean=-0.000012 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.61119 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 77 components and 0.61119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140590Jy sigma=0.001213 ! Fit after self-cal, rms=0.140550Jy sigma=0.001213 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6295 mas, bmaj=1.622 mas, bpa=5.774 degrees ! Estimated noise=1631.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.468909 Jy ! Component: 100 - total flux cleaned = 0.543216 Jy ! Component: 150 - total flux cleaned = 0.568026 Jy ! Component: 200 - total flux cleaned = 0.580877 Jy ! Total flux subtracted in 200 components = 0.580877 Jy ! Clean residual min=-0.007312 max=0.006427 Jy/beam ! Clean residual mean=-0.000009 rms=0.001722 Jy/beam ! Combined flux in latest and established models = 0.580877 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.580877 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=2.018 mas, bpa=1.59 degrees ! Estimated noise=868.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, 1.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132923 Jy ! Component: 100 - total flux cleaned = 0.0204285 Jy ! Component: 150 - total flux cleaned = 0.0248756 Jy ! Component: 200 - total flux cleaned = 0.0274222 Jy ! Total flux subtracted in 200 components = 0.0274222 Jy ! Clean residual min=-0.003638 max=0.003246 Jy/beam ! Clean residual mean=-0.000009 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.6083 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.6083 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=6.043 mas, bpa=16.65 degrees ! Estimated noise=1118.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229168 Jy ! Component: 100 - total flux cleaned = 0.00280942 Jy ! Component: 150 - total flux cleaned = 0.00300223 Jy ! Component: 200 - total flux cleaned = 0.00300061 Jy ! Total flux subtracted in 200 components = 0.00300061 Jy ! Clean residual min=-0.003210 max=0.003481 Jy/beam ! Clean residual mean=-0.000010 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.6113 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.6113 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=2.018 mas, bpa=1.59 degrees ! Estimated noise=868.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000804612 Jy ! Component: 100 - total flux cleaned = -0.000797694 Jy ! Component: 150 - total flux cleaned = -0.000748935 Jy ! Component: 200 - total flux cleaned = -0.00070793 Jy ! Total flux subtracted in 200 components = -0.00070793 Jy ! Clean residual min=-0.003555 max=0.003070 Jy/beam ! Clean residual mean=-0.000006 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.610593 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.610593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140399Jy sigma=0.001212 ! Fit after self-cal, rms=0.140372Jy sigma=0.001211 wmodel J1438-2204_X_2002_01_31_yyk\_map.mod ! Writing 88 model components to file: J1438-2204_X_2002_01_31_yyk_map.mod wobs J1438-2204_X_2002_01_31_yyk\_uvs.fits ! Applying 93 buffered edits. ! Writing UV FITS file: J1438-2204_X_2002_01_31_yyk_uvs.fits wwins J1438-2204_X_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J1438-2204_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013684 Jy ! Component: 100 - total flux cleaned = -0.00147679 Jy ! Component: 150 - total flux cleaned = -0.00157801 Jy ! Component: 200 - total flux cleaned = -0.00148545 Jy ! Component: 250 - total flux cleaned = -0.00139713 Jy ! Component: 300 - total flux cleaned = -0.00118527 Jy ! Component: 350 - total flux cleaned = -0.0010226 Jy ! Component: 400 - total flux cleaned = -0.000904414 Jy ! Component: 450 - total flux cleaned = -0.000827669 Jy ! Component: 500 - total flux cleaned = -0.000645818 Jy ! Component: 550 - total flux cleaned = -0.000469777 Jy ! Component: 600 - total flux cleaned = -0.000367197 Jy ! Component: 650 - total flux cleaned = -0.000233863 Jy ! Component: 700 - total flux cleaned = -0.000138158 Jy ! Component: 750 - total flux cleaned = -0.000171607 Jy ! Component: 800 - total flux cleaned = -7.86503e-05 Jy ! Component: 850 - total flux cleaned = -7.91544e-05 Jy ! Component: 900 - total flux cleaned = 9.29189e-06 Jy ! Component: 950 - total flux cleaned = 9.89791e-06 Jy ! Component: 1000 - total flux cleaned = 0.000152307 Jy ! Component: 1050 - total flux cleaned = -1.57472e-05 Jy ! Component: 1100 - total flux cleaned = 6.67585e-05 Jy ! Component: 1150 - total flux cleaned = 0.000120037 Jy ! Component: 1200 - total flux cleaned = 3.94448e-05 Jy ! Component: 1250 - total flux cleaned = 0.000117318 Jy ! Component: 1300 - total flux cleaned = 4.05143e-05 Jy ! Component: 1350 - total flux cleaned = 0.000117104 Jy ! Component: 1400 - total flux cleaned = 0.000142058 Jy ! Component: 1450 - total flux cleaned = 0.000191169 Jy ! Component: 1500 - total flux cleaned = 0.000118499 Jy ! Component: 1550 - total flux cleaned = 0.000118991 Jy ! Component: 1600 - total flux cleaned = 9.53739e-05 Jy ! Component: 1650 - total flux cleaned = -6.68496e-05 Jy ! Component: 1700 - total flux cleaned = -8.94715e-05 Jy ! Component: 1750 - total flux cleaned = -0.000180204 Jy ! Component: 1800 - total flux cleaned = -0.000292493 Jy ! Component: 1850 - total flux cleaned = -0.000447609 Jy ! Component: 1900 - total flux cleaned = -0.000513102 Jy ! Component: 1950 - total flux cleaned = -0.000643001 Jy ! Component: 2000 - total flux cleaned = -0.000664405 Jy ! Total flux subtracted in 2048 components = -0.000854817 Jy ! Clean residual min=-0.001239 max=0.001160 Jy/beam ! Clean residual mean=-0.000007 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.609738 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 213 components and 0.609738 Jy ![Exited script file: muppet] wmap "J1438-2204_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 2.018 at 1.59 degrees (North through East) ! Clean map min=-0.0020195 max=0.55307 Jy/beam ! Writing clean map to FITS file: J1438-2204_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.55307 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000376752 device "J1438-2204_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1438-2204_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.20436 0.20436 0.408721 0.817442 1.63488 3.26977 6.53953 13.0791 26.1581 52.3163 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.553 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 2.018 at 1.59 degrees (North through East) ! Clean map min=-0.0020195 max=0.55307 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1438-2204_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1438-2204_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1438-2204_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:58:53 2007