! Started logfile: J1415-3705_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:53:58 2007 obs J1415-3705_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1415-3705_X_2002_05_14_yyk_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.659259 visibilities/baseline/integration-bin. ! Found source: J1415-3705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1079 lines of history. ! ! Reading 4628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1415-3705_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.32649 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6315 mas, bmaj=1.724 mas, bpa=7.253 degrees ! Estimated noise=2628.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.200879 Jy ! Component: 100 - total flux cleaned = 0.255265 Jy ! Total flux subtracted in 100 components = 0.255265 Jy ! Clean residual min=-0.021835 max=0.027869 Jy/beam ! Clean residual mean=-0.000013 rms=0.006263 Jy/beam ! Combined flux in latest and established models = 0.255265 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.255265 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.207517Jy sigma=0.001324 ! Fit after self-cal, rms=0.207288Jy sigma=0.001322 ! Inverting map and beam ! Estimated beam: bmin=0.6315 mas, bmaj=1.724 mas, bpa=7.253 degrees ! Estimated noise=2628.15 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7981 mas, bmaj=2.168 mas, bpa=5.832 degrees ! Estimated noise=1541.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450751 Jy ! Component: 100 - total flux cleaned = 0.0608016 Jy ! Component: 150 - total flux cleaned = 0.0665529 Jy ! Component: 200 - total flux cleaned = 0.0680731 Jy ! Total flux subtracted in 200 components = 0.0680731 Jy ! Clean residual min=-0.016974 max=0.015097 Jy/beam ! Clean residual mean=-0.000011 rms=0.004139 Jy/beam ! Combined flux in latest and established models = 0.323338 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 0.323338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202924Jy sigma=0.001278 ! Fit after self-cal, rms=0.202913Jy sigma=0.001278 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7981 x 2.168 at 5.832 degrees (North through East) ! Clean map min=-0.015916 max=0.23634 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.985417 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 1.00* KP 0.88 ! LA 1.00 NL 1.33 OV 0.97 PT 0.95 ! SC 0.91 MK 1.02 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00639 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00* KP 0.86 ! LA 1.00 NL 1.30 OV 0.91 PT 1.02 ! SC 0.90 MK 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.969324 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.93 HN 1.00* KP 0.85 ! LA 1.01 NL 1.29 OV 0.97 PT 1.01 ! SC 1.10 MK 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.956298 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 1.00* KP 0.92 ! LA 0.97 NL 1.32 OV 1.02 PT 1.05 ! SC 1.07 MK 1.04 ! ! ! Fit before self-cal, rms=0.202913Jy sigma=0.001278 ! Fit after self-cal, rms=0.208803Jy sigma=0.001258 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208803Jy sigma=0.001258 ! Fit after self-cal, rms=0.208799Jy sigma=0.001258 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8051 mas, bmaj=2.17 mas, bpa=6.634 degrees ! Estimated noise=1475.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00896164 Jy ! Component: 100 - total flux cleaned = -0.0112226 Jy ! Component: 150 - total flux cleaned = -0.0118146 Jy ! Component: 200 - total flux cleaned = -0.0118586 Jy ! Total flux subtracted in 200 components = -0.0118586 Jy ! Clean residual min=-0.008998 max=0.006520 Jy/beam ! Clean residual mean=0.000008 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.31148 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.311479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208490Jy sigma=0.001256 ! Fit after self-cal, rms=0.208482Jy sigma=0.001256 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208482Jy sigma=0.001256 ! Fit after self-cal, rms=0.202217Jy sigma=0.001212 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390304 Jy ! Component: 100 - total flux cleaned = 0.00440065 Jy ! Component: 150 - total flux cleaned = 0.00451165 Jy ! Component: 200 - total flux cleaned = 0.00459963 Jy ! Total flux subtracted in 200 components = 0.00459963 Jy ! Clean residual min=-0.008238 max=0.006385 Jy/beam ! Clean residual mean=0.000011 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 0.316079 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.316079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202185Jy sigma=0.001212 ! Fit after self-cal, rms=0.201504Jy sigma=0.001208 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8051 x 2.17 at 6.634 degrees (North through East) ! Clean map min=-0.0083543 max=0.23268 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201504Jy sigma=0.001208 ! Fit after self-cal, rms=0.201025Jy sigma=0.001205 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201025Jy sigma=0.001205 ! Fit after self-cal, rms=0.200947Jy sigma=0.001205 ! Inverting map and beam ! Estimated beam: bmin=0.8031 mas, bmaj=2.169 mas, bpa=6.767 degrees ! Estimated noise=1471.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526001 Jy ! Component: 100 - total flux cleaned = 0.000568459 Jy ! Component: 150 - total flux cleaned = 0.000623548 Jy ! Component: 200 - total flux cleaned = 0.000654406 Jy ! Total flux subtracted in 200 components = 0.000654406 Jy ! Clean residual min=-0.007744 max=0.006434 Jy/beam ! Clean residual mean=0.000013 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 0.316734 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.316734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200947Jy sigma=0.001204 ! Fit after self-cal, rms=0.200939Jy sigma=0.001205 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200939Jy sigma=0.001205 ! Fit after self-cal, rms=0.201238Jy sigma=0.001201 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201238Jy sigma=0.001201 ! Fit after self-cal, rms=0.201247Jy sigma=0.001201 ! Inverting map and beam ! Estimated beam: bmin=0.8013 mas, bmaj=2.164 mas, bpa=6.826 degrees ! Estimated noise=1470.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576837 Jy ! Component: 100 - total flux cleaned = 0.000646207 Jy ! Component: 150 - total flux cleaned = 0.000689743 Jy ! Component: 200 - total flux cleaned = 0.000717059 Jy ! Total flux subtracted in 200 components = 0.000717059 Jy ! Clean residual min=-0.007755 max=0.006484 Jy/beam ! Clean residual mean=0.000016 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.317451 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.317451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201247Jy sigma=0.001201 ! Fit after self-cal, rms=0.201251Jy sigma=0.001201 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=9.252 mas, bpa=11.46 degrees ! Estimated noise=1933.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942563 Jy ! Component: 100 - total flux cleaned = 0.000941594 Jy ! Component: 150 - total flux cleaned = 0.000971539 Jy ! Component: 200 - total flux cleaned = 0.00102984 Jy ! Total flux subtracted in 200 components = 0.00102984 Jy ! Clean residual min=-0.008555 max=0.008459 Jy/beam ! Clean residual mean=0.000031 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.31848 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 50 components and 0.31848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201267Jy sigma=0.001201 ! Fit after self-cal, rms=0.201263Jy sigma=0.001201 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6329 mas, bmaj=1.718 mas, bpa=7.515 degrees ! Estimated noise=2579.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.200362 Jy ! Component: 100 - total flux cleaned = 0.254117 Jy ! Component: 150 - total flux cleaned = 0.279755 Jy ! Component: 200 - total flux cleaned = 0.293396 Jy ! Total flux subtracted in 200 components = 0.293396 Jy ! Clean residual min=-0.013639 max=0.014210 Jy/beam ! Clean residual mean=0.000013 rms=0.003436 Jy/beam ! Combined flux in latest and established models = 0.293396 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.293396 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8013 mas, bmaj=2.164 mas, bpa=6.826 degrees ! Estimated noise=1470.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172518 Jy ! Component: 100 - total flux cleaned = 0.0225988 Jy ! Component: 150 - total flux cleaned = 0.0232888 Jy ! Component: 200 - total flux cleaned = 0.0234406 Jy ! Total flux subtracted in 200 components = 0.0234406 Jy ! Clean residual min=-0.007719 max=0.006930 Jy/beam ! Clean residual mean=0.000016 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.316837 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.316837 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=9.252 mas, bpa=11.46 degrees ! Estimated noise=1933.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176758 Jy ! Component: 100 - total flux cleaned = 0.00177539 Jy ! Component: 150 - total flux cleaned = 0.00177805 Jy ! Component: 200 - total flux cleaned = 0.00177968 Jy ! Total flux subtracted in 200 components = 0.00177968 Jy ! Clean residual min=-0.008581 max=0.008437 Jy/beam ! Clean residual mean=0.000031 rms=0.002838 Jy/beam ! Combined flux in latest and established models = 0.318616 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 37 components and 0.318616 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8013 mas, bmaj=2.164 mas, bpa=6.826 degrees ! Estimated noise=1470.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000987564 Jy ! Component: 100 - total flux cleaned = -0.000920565 Jy ! Component: 150 - total flux cleaned = -0.000876432 Jy ! Component: 200 - total flux cleaned = -0.000840937 Jy ! Total flux subtracted in 200 components = -0.000840937 Jy ! Clean residual min=-0.007734 max=0.006781 Jy/beam ! Clean residual mean=0.000016 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.317776 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.317775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201276Jy sigma=0.001201 ! Fit after self-cal, rms=0.201275Jy sigma=0.001201 wmodel J1415-3705_X_2002_05_14_yyk\_map.mod ! Writing 42 model components to file: J1415-3705_X_2002_05_14_yyk_map.mod wobs J1415-3705_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1415-3705_X_2002_05_14_yyk_uvs.fits wwins J1415-3705_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J1415-3705_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213366 Jy ! Component: 100 - total flux cleaned = -0.00225861 Jy ! Component: 150 - total flux cleaned = -0.00225556 Jy ! Component: 200 - total flux cleaned = -0.002254 Jy ! Component: 250 - total flux cleaned = -0.00216858 Jy ! Component: 300 - total flux cleaned = -0.00242372 Jy ! Component: 350 - total flux cleaned = -0.00258403 Jy ! Component: 400 - total flux cleaned = -0.00273533 Jy ! Component: 450 - total flux cleaned = -0.00295069 Jy ! Component: 500 - total flux cleaned = -0.00322849 Jy ! Component: 550 - total flux cleaned = -0.00369557 Jy ! Component: 600 - total flux cleaned = -0.00414593 Jy ! Component: 650 - total flux cleaned = -0.00458098 Jy ! Component: 700 - total flux cleaned = -0.00512021 Jy ! Component: 750 - total flux cleaned = -0.00535063 Jy ! Component: 800 - total flux cleaned = -0.00551813 Jy ! Component: 850 - total flux cleaned = -0.0056265 Jy ! Component: 900 - total flux cleaned = -0.0058912 Jy ! Component: 950 - total flux cleaned = -0.00620184 Jy ! Component: 1000 - total flux cleaned = -0.00655752 Jy ! Component: 1050 - total flux cleaned = -0.00685479 Jy ! Component: 1100 - total flux cleaned = -0.00714689 Jy ! Component: 1150 - total flux cleaned = -0.00728943 Jy ! Component: 1200 - total flux cleaned = -0.00752321 Jy ! Component: 1250 - total flux cleaned = -0.00770685 Jy ! Component: 1300 - total flux cleaned = -0.00766127 Jy ! Component: 1350 - total flux cleaned = -0.00779413 Jy ! Component: 1400 - total flux cleaned = -0.00788124 Jy ! Component: 1450 - total flux cleaned = -0.00788112 Jy ! Component: 1500 - total flux cleaned = -0.00792334 Jy ! Component: 1550 - total flux cleaned = -0.00809071 Jy ! Component: 1600 - total flux cleaned = -0.00800808 Jy ! Component: 1650 - total flux cleaned = -0.00804979 Jy ! Component: 1700 - total flux cleaned = -0.00833386 Jy ! Component: 1750 - total flux cleaned = -0.00841386 Jy ! Component: 1800 - total flux cleaned = -0.00853312 Jy ! Component: 1850 - total flux cleaned = -0.00873007 Jy ! Component: 1900 - total flux cleaned = -0.00888611 Jy ! Component: 1950 - total flux cleaned = -0.0089637 Jy ! Component: 2000 - total flux cleaned = -0.00884761 Jy ! Total flux subtracted in 2048 components = -0.00869391 Jy ! Clean residual min=-0.002363 max=0.002293 Jy/beam ! Clean residual mean=-0.000003 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.309082 Jy keep ! Adding 115 model components to the UV plane model. ! The established model now contains 157 components and 0.309082 Jy ![Exited script file: muppet] wmap "J1415-3705_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8013 x 2.164 at 6.826 degrees (North through East) ! Clean map min=-0.0048898 max=0.23114 Jy/beam ! Writing clean map to FITS file: J1415-3705_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.231136 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00067963 device "J1415-3705_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1415-3705_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.882116 0.882116 1.76423 3.52846 7.05693 14.1139 28.2277 56.4554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.231 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8013 x 2.164 at 6.826 degrees (North through East) ! Clean map min=-0.0048898 max=0.23114 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1415-3705_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1415-3705_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1415-3705_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:54:04 2007