! Started logfile: J1415-3705_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:53:37 2007 obs J1415-3705_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1415-3705_S_2002_01_31_yyk_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.713889 visibilities/baseline/integration-bin. ! Found source: J1415-3705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 5140 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1415-3705_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.46984 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=6.907 mas, bpa=4.767 degrees ! Estimated noise=2174.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.366509 Jy ! Component: 100 - total flux cleaned = 0.422342 Jy ! Total flux subtracted in 100 components = 0.422342 Jy ! Clean residual min=-0.022383 max=0.040013 Jy/beam ! Clean residual mean=0.000504 rms=0.007059 Jy/beam ! Combined flux in latest and established models = 0.422342 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.422342 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.206277Jy sigma=0.001300 ! Fit after self-cal, rms=0.206098Jy sigma=0.001299 ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=6.907 mas, bpa=4.767 degrees ! Estimated noise=2174.15 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=8.185 mas, bpa=0.3554 degrees ! Estimated noise=1525.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -28.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328202 Jy ! Component: 100 - total flux cleaned = 0.0324241 Jy ! Component: 150 - total flux cleaned = 0.0308781 Jy ! Component: 200 - total flux cleaned = 0.0298868 Jy ! Total flux subtracted in 200 components = 0.0298868 Jy ! Clean residual min=-0.016949 max=0.025196 Jy/beam ! Clean residual mean=0.000547 rms=0.004996 Jy/beam ! Combined flux in latest and established models = 0.452229 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.452229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201503Jy sigma=0.001271 ! Fit after self-cal, rms=0.200934Jy sigma=0.001267 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.993 x 8.185 at 0.3554 degrees (North through East) ! Clean map min=-0.015544 max=0.39788 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999678 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.11 HN 1.00* KP 0.94 ! LA 0.94 MK 0.94 NL 1.14 OV 0.94 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.987881 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.00* KP 1.00* ! LA 0.96 MK 1.01 NL 1.25 OV 0.99 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.948069 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 1.00* KP 1.06 ! LA 0.97 MK 1.01 NL 1.39 OV 0.98 ! PT 1.16 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01082 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.86 HN 1.00* KP 1.07 ! LA 0.81 MK 1.00 NL 1.29 OV 0.91 ! PT 0.99 SC 0.97 ! ! ! Fit before self-cal, rms=0.200934Jy sigma=0.001267 ! Fit after self-cal, rms=0.196369Jy sigma=0.001223 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196369Jy sigma=0.001223 ! Fit after self-cal, rms=0.196387Jy sigma=0.001223 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=8.142 mas, bpa=0.4414 degrees ! Estimated noise=1487.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112622 Jy ! Component: 100 - total flux cleaned = -0.0115244 Jy ! Component: 150 - total flux cleaned = -0.0113564 Jy ! Component: 200 - total flux cleaned = -0.011214 Jy ! Total flux subtracted in 200 components = -0.011214 Jy ! Clean residual min=-0.007967 max=0.006304 Jy/beam ! Clean residual mean=0.000033 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.441015 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.441015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195879Jy sigma=0.001220 ! Fit after self-cal, rms=0.195844Jy sigma=0.001219 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195844Jy sigma=0.001219 ! Fit after self-cal, rms=0.192236Jy sigma=0.001194 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200308 Jy ! Component: 100 - total flux cleaned = -0.00180133 Jy ! Component: 150 - total flux cleaned = -0.00162976 Jy ! Component: 200 - total flux cleaned = -0.00147341 Jy ! Total flux subtracted in 200 components = -0.00147341 Jy ! Clean residual min=-0.007772 max=0.005666 Jy/beam ! Clean residual mean=0.000047 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.439541 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.439541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192199Jy sigma=0.001194 ! Fit after self-cal, rms=0.191630Jy sigma=0.001190 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.992 x 8.142 at 0.4414 degrees (North through East) ! Clean map min=-0.0080718 max=0.39537 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191630Jy sigma=0.001190 ! Fit after self-cal, rms=0.192534Jy sigma=0.001182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192534Jy sigma=0.001182 ! Fit after self-cal, rms=0.192410Jy sigma=0.001181 ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.123 mas, bpa=0.5331 degrees ! Estimated noise=1483.37 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231022 Jy ! Component: 100 - total flux cleaned = -0.00230953 Jy ! Component: 150 - total flux cleaned = -0.00211224 Jy ! Component: 200 - total flux cleaned = -0.0021111 Jy ! Total flux subtracted in 200 components = -0.0021111 Jy ! Clean residual min=-0.007704 max=0.004964 Jy/beam ! Clean residual mean=0.000053 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.43743 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.43743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192341Jy sigma=0.001180 ! Fit after self-cal, rms=0.192297Jy sigma=0.001180 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192297Jy sigma=0.001180 ! Fit after self-cal, rms=0.192433Jy sigma=0.001177 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192433Jy sigma=0.001177 ! Fit after self-cal, rms=0.192431Jy sigma=0.001177 ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.111 mas, bpa=0.5996 degrees ! Estimated noise=1481.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141667 Jy ! Component: 100 - total flux cleaned = -0.00134919 Jy ! Component: 150 - total flux cleaned = -0.00123084 Jy ! Component: 200 - total flux cleaned = -0.00117635 Jy ! Total flux subtracted in 200 components = -0.00117635 Jy ! Clean residual min=-0.007400 max=0.004853 Jy/beam ! Clean residual mean=0.000059 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.436254 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.436254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192383Jy sigma=0.001177 ! Fit after self-cal, rms=0.192379Jy sigma=0.001177 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.01 mas, bmaj=28.58 mas, bpa=7.145 degrees ! Estimated noise=1928.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00096056 Jy ! Component: 100 - total flux cleaned = 0.00131826 Jy ! Component: 150 - total flux cleaned = 0.00159775 Jy ! Component: 200 - total flux cleaned = 0.00177586 Jy ! Total flux subtracted in 200 components = 0.00177586 Jy ! Clean residual min=-0.006554 max=0.004181 Jy/beam ! Clean residual mean=0.000083 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.43803 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 85 components and 0.43803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192387Jy sigma=0.001177 ! Fit after self-cal, rms=0.192385Jy sigma=0.001177 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=6.861 mas, bpa=4.667 degrees ! Estimated noise=2134.21 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.36182 Jy ! Component: 100 - total flux cleaned = 0.41555 Jy ! Component: 150 - total flux cleaned = 0.430115 Jy ! Component: 200 - total flux cleaned = 0.431863 Jy ! Total flux subtracted in 200 components = 0.431863 Jy ! Clean residual min=-0.009179 max=0.009628 Jy/beam ! Clean residual mean=0.000066 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 0.431863 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.431863 Jy ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.111 mas, bpa=0.5996 degrees ! Estimated noise=1481.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199044 Jy ! Component: 100 - total flux cleaned = 0.00267474 Jy ! Component: 150 - total flux cleaned = 0.00301843 Jy ! Component: 200 - total flux cleaned = 0.00321179 Jy ! Total flux subtracted in 200 components = 0.00321179 Jy ! Clean residual min=-0.006805 max=0.005892 Jy/beam ! Clean residual mean=0.000070 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.435075 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.435075 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.01 mas, bmaj=28.58 mas, bpa=7.145 degrees ! Estimated noise=1928.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013931 Jy ! Component: 100 - total flux cleaned = 0.0018914 Jy ! Component: 150 - total flux cleaned = 0.00209992 Jy ! Component: 200 - total flux cleaned = 0.00222494 Jy ! Total flux subtracted in 200 components = 0.00222494 Jy ! Clean residual min=-0.006210 max=0.004401 Jy/beam ! Clean residual mean=0.000099 rms=0.001936 Jy/beam ! Combined flux in latest and established models = 0.4373 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.4373 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.111 mas, bpa=0.5996 degrees ! Estimated noise=1481.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00076791 Jy ! Component: 100 - total flux cleaned = -0.000862812 Jy ! Component: 150 - total flux cleaned = -0.00086816 Jy ! Component: 200 - total flux cleaned = -0.000933199 Jy ! Total flux subtracted in 200 components = -0.000933199 Jy ! Clean residual min=-0.006849 max=0.005315 Jy/beam ! Clean residual mean=0.000059 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.436366 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.436366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192347Jy sigma=0.001177 ! Fit after self-cal, rms=0.192323Jy sigma=0.001177 wmodel J1415-3705_S_2002_01_31_yyk\_map.mod ! Writing 64 model components to file: J1415-3705_S_2002_01_31_yyk_map.mod wobs J1415-3705_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1415-3705_S_2002_01_31_yyk_uvs.fits wwins J1415-3705_S_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J1415-3705_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144817 Jy ! Component: 100 - total flux cleaned = -0.00135306 Jy ! Component: 150 - total flux cleaned = -0.00103201 Jy ! Component: 200 - total flux cleaned = -0.000656922 Jy ! Component: 250 - total flux cleaned = -0.000374113 Jy ! Component: 300 - total flux cleaned = -0.000104636 Jy ! Component: 350 - total flux cleaned = 0.000211754 Jy ! Component: 400 - total flux cleaned = 0.000514635 Jy ! Component: 450 - total flux cleaned = 0.000571147 Jy ! Component: 500 - total flux cleaned = 0.000626679 Jy ! Component: 550 - total flux cleaned = 0.000462204 Jy ! Component: 600 - total flux cleaned = 0.000409069 Jy ! Component: 650 - total flux cleaned = 0.000357159 Jy ! Component: 700 - total flux cleaned = 0.000306721 Jy ! Component: 750 - total flux cleaned = 0.000404986 Jy ! Component: 800 - total flux cleaned = 0.000453917 Jy ! Component: 850 - total flux cleaned = 0.000501913 Jy ! Component: 900 - total flux cleaned = 0.000501781 Jy ! Component: 950 - total flux cleaned = 0.000456247 Jy ! Component: 1000 - total flux cleaned = 0.000456696 Jy ! Component: 1050 - total flux cleaned = 0.000456224 Jy ! Component: 1100 - total flux cleaned = 0.00037127 Jy ! Component: 1150 - total flux cleaned = 0.000287553 Jy ! Component: 1200 - total flux cleaned = 0.000246458 Jy ! Component: 1250 - total flux cleaned = 0.000206073 Jy ! Component: 1300 - total flux cleaned = 0.00016689 Jy ! Component: 1350 - total flux cleaned = 0.000206481 Jy ! Component: 1400 - total flux cleaned = 0.000129357 Jy ! Component: 1450 - total flux cleaned = 0.000167211 Jy ! Component: 1500 - total flux cleaned = 0.000205174 Jy ! Component: 1550 - total flux cleaned = 0.000279816 Jy ! Component: 1600 - total flux cleaned = 0.000316883 Jy ! Component: 1650 - total flux cleaned = 0.000316652 Jy ! Component: 1700 - total flux cleaned = 0.000316389 Jy ! Component: 1750 - total flux cleaned = 0.00027976 Jy ! Component: 1800 - total flux cleaned = 0.000243567 Jy ! Component: 1850 - total flux cleaned = 0.000207567 Jy ! Component: 1900 - total flux cleaned = 0.000100154 Jy ! Component: 1950 - total flux cleaned = 2.83957e-05 Jy ! Component: 2000 - total flux cleaned = -4.37179e-05 Jy ! Total flux subtracted in 2048 components = -0.00018734 Jy ! Clean residual min=-0.002200 max=0.002300 Jy/beam ! Clean residual mean=-0.000006 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.436179 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 191 components and 0.436179 Jy ![Exited script file: muppet] wmap "J1415-3705_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 8.111 at 0.5996 degrees (North through East) ! Clean map min=-0.0068479 max=0.40242 Jy/beam ! Writing clean map to FITS file: J1415-3705_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.402423 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000662166 device "J1415-3705_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1415-3705_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.493635 0.493635 0.987269 1.97454 3.94908 7.89815 15.7963 31.5926 63.1852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.402 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 8.111 at 0.5996 degrees (North through East) ! Clean map min=-0.0068479 max=0.40242 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1415-3705_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1415-3705_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1415-3705_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:53:44 2007