! Started logfile: J1345-3015_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:58:10 2007 obs J1345-3015_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1345-3015_X_2002_01_31_yyk_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735435 visibilities/baseline/integration-bin. ! Found source: J1345-3015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 9796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J1345-3015_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.240501 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6553 mas, bmaj=1.57 mas, bpa=2.187 degrees ! Estimated noise=1854.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0750419 Jy ! Component: 100 - total flux cleaned = 0.112062 Jy ! Total flux subtracted in 100 components = 0.112062 Jy ! Clean residual min=-0.011721 max=0.020372 Jy/beam ! Clean residual mean=-0.000026 rms=0.003782 Jy/beam ! Combined flux in latest and established models = 0.112062 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.112062 Jy ! ! Correcting IF 1. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.214727Jy sigma=0.001684 ! Fit after self-cal, rms=0.214428Jy sigma=0.001682 ! Inverting map and beam ! Estimated beam: bmin=0.6554 mas, bmaj=1.57 mas, bpa=2.188 degrees ! Estimated noise=1855.45 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8891 mas, bmaj=2.052 mas, bpa=1.948 degrees ! Estimated noise=954.128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346819 Jy ! Component: 100 - total flux cleaned = 0.0464672 Jy ! Component: 150 - total flux cleaned = 0.0501793 Jy ! Component: 200 - total flux cleaned = 0.0504968 Jy ! Total flux subtracted in 200 components = 0.0504968 Jy ! Clean residual min=-0.009423 max=0.020660 Jy/beam ! Clean residual mean=0.000038 rms=0.003777 Jy/beam ! Combined flux in latest and established models = 0.162559 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.162559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211613Jy sigma=0.001649 ! Fit after self-cal, rms=0.211595Jy sigma=0.001649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8891 x 2.052 at 1.948 degrees (North through East) ! Clean map min=-0.0091612 max=0.073872 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.211595Jy sigma=0.001649 ! Fit after self-cal, rms=0.211553Jy sigma=0.001649 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211553Jy sigma=0.001649 ! Fit after self-cal, rms=0.211552Jy sigma=0.001649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.056 mas, bpa=1.865 degrees ! Estimated noise=955.758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.023087 Jy ! Component: 100 - total flux cleaned = 0.0311786 Jy ! Component: 150 - total flux cleaned = 0.0342249 Jy ! Component: 200 - total flux cleaned = 0.035035 Jy ! Total flux subtracted in 200 components = 0.035035 Jy ! Clean residual min=-0.006890 max=0.008304 Jy/beam ! Clean residual mean=0.000001 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.197594 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 0.197594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210260Jy sigma=0.001633 ! Fit after self-cal, rms=0.210015Jy sigma=0.001631 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210015Jy sigma=0.001631 ! Fit after self-cal, rms=0.208871Jy sigma=0.001621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697401 Jy ! Component: 100 - total flux cleaned = 0.00853444 Jy ! Component: 150 - total flux cleaned = 0.00890747 Jy ! Component: 200 - total flux cleaned = 0.00940686 Jy ! Total flux subtracted in 200 components = 0.00940686 Jy ! Clean residual min=-0.007594 max=0.007130 Jy/beam ! Clean residual mean=0.000003 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.207001 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.207001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208447Jy sigma=0.001618 ! Fit after self-cal, rms=0.208176Jy sigma=0.001616 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 2.056 at 1.865 degrees (North through East) ! Clean map min=-0.0061279 max=0.077515 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=7.648 mas, bpa=12.91 degrees ! Estimated noise=1209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247111 Jy ! Component: 100 - total flux cleaned = 0.00282243 Jy ! Component: 150 - total flux cleaned = 0.00318866 Jy ! Component: 200 - total flux cleaned = 0.00342931 Jy ! Total flux subtracted in 200 components = 0.00342931 Jy ! Clean residual min=-0.004683 max=0.004745 Jy/beam ! Clean residual mean=0.000006 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.21043 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.21043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208213Jy sigma=0.001616 ! Fit after self-cal, rms=0.208113Jy sigma=0.001615 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6554 mas, bmaj=1.57 mas, bpa=2.193 degrees ! Estimated noise=1857.23 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805898 Jy ! Component: 100 - total flux cleaned = 0.119255 Jy ! Component: 150 - total flux cleaned = 0.143946 Jy ! Component: 200 - total flux cleaned = 0.161294 Jy ! Total flux subtracted in 200 components = 0.161294 Jy ! Clean residual min=-0.009978 max=0.011692 Jy/beam ! Clean residual mean=-0.000015 rms=0.002751 Jy/beam ! Combined flux in latest and established models = 0.161294 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.161294 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.056 mas, bpa=1.865 degrees ! Estimated noise=955.758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -0.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224477 Jy ! Component: 100 - total flux cleaned = 0.0345345 Jy ! Component: 150 - total flux cleaned = 0.0417339 Jy ! Component: 200 - total flux cleaned = 0.0440969 Jy ! Total flux subtracted in 200 components = 0.0440969 Jy ! Clean residual min=-0.006933 max=0.007424 Jy/beam ! Clean residual mean=0.000002 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.205391 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 0.205391 Jy ! Inverting map ! Added new window around map position (-18.6, -4.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057081 Jy ! Component: 100 - total flux cleaned = 0.00735009 Jy ! Component: 150 - total flux cleaned = 0.0082768 Jy ! Component: 200 - total flux cleaned = 0.0089868 Jy ! Total flux subtracted in 200 components = 0.0089868 Jy ! Clean residual min=-0.006035 max=0.006508 Jy/beam ! Clean residual mean=-0.000001 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.214378 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.214378 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=7.648 mas, bpa=12.91 degrees ! Estimated noise=1209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364728 Jy ! Component: 100 - total flux cleaned = 0.00415864 Jy ! Component: 150 - total flux cleaned = 0.0042069 Jy ! Component: 200 - total flux cleaned = 0.0043129 Jy ! Total flux subtracted in 200 components = 0.0043129 Jy ! Clean residual min=-0.004678 max=0.005726 Jy/beam ! Clean residual mean=0.000002 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.21869 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.21869 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.056 mas, bpa=1.865 degrees ! Estimated noise=955.758 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014963 Jy ! Component: 100 - total flux cleaned = -0.00136385 Jy ! Component: 150 - total flux cleaned = -0.00124409 Jy ! Component: 200 - total flux cleaned = -0.00113553 Jy ! Total flux subtracted in 200 components = -0.00113553 Jy ! Clean residual min=-0.005897 max=0.006336 Jy/beam ! Clean residual mean=0.000004 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.217555 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.217555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207135Jy sigma=0.001607 ! Fit after self-cal, rms=0.206945Jy sigma=0.001606 wmodel J1345-3015_X_2002_01_31_yyk\_map.mod ! Writing 104 model components to file: J1345-3015_X_2002_01_31_yyk_map.mod wobs J1345-3015_X_2002_01_31_yyk\_uvs.fits ! Applying 74 buffered edits. ! Writing UV FITS file: J1345-3015_X_2002_01_31_yyk_uvs.fits wwins J1345-3015_X_2002_01_31_yyk\_map.win ! wwins: Wrote 4 windows to J1345-3015_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270054 Jy ! Component: 100 - total flux cleaned = -0.00309032 Jy ! Component: 150 - total flux cleaned = -0.00327328 Jy ! Component: 200 - total flux cleaned = -0.00318569 Jy ! Component: 250 - total flux cleaned = -0.00277385 Jy ! Component: 300 - total flux cleaned = -0.00261641 Jy ! Component: 350 - total flux cleaned = -0.00246479 Jy ! Component: 400 - total flux cleaned = -0.00275182 Jy ! Component: 450 - total flux cleaned = -0.00282155 Jy ! Component: 500 - total flux cleaned = -0.00282214 Jy ! Component: 550 - total flux cleaned = -0.00282113 Jy ! Component: 600 - total flux cleaned = -0.00275578 Jy ! Component: 650 - total flux cleaned = -0.00250356 Jy ! Component: 700 - total flux cleaned = -0.00244081 Jy ! Component: 750 - total flux cleaned = -0.00225757 Jy ! Component: 800 - total flux cleaned = -0.0018425 Jy ! Component: 850 - total flux cleaned = -0.00178496 Jy ! Component: 900 - total flux cleaned = -0.00166915 Jy ! Component: 950 - total flux cleaned = -0.00161222 Jy ! Component: 1000 - total flux cleaned = -0.00144575 Jy ! Component: 1050 - total flux cleaned = -0.00144506 Jy ! Component: 1100 - total flux cleaned = -0.00123047 Jy ! Component: 1150 - total flux cleaned = -0.00123149 Jy ! Component: 1200 - total flux cleaned = -0.00117942 Jy ! Component: 1250 - total flux cleaned = -0.0011794 Jy ! Component: 1300 - total flux cleaned = -0.00107876 Jy ! Component: 1350 - total flux cleaned = -0.000929098 Jy ! Component: 1400 - total flux cleaned = -0.000830566 Jy ! Component: 1450 - total flux cleaned = -0.000684767 Jy ! Component: 1500 - total flux cleaned = -0.000685071 Jy ! Component: 1550 - total flux cleaned = -0.000589888 Jy ! Component: 1600 - total flux cleaned = -0.000542787 Jy ! Component: 1650 - total flux cleaned = -0.000542698 Jy ! Component: 1700 - total flux cleaned = -0.000358118 Jy ! Component: 1750 - total flux cleaned = -0.000175732 Jy ! Component: 1800 - total flux cleaned = -0.000130394 Jy ! Component: 1850 - total flux cleaned = 4.10819e-06 Jy ! Component: 1900 - total flux cleaned = 0.000136951 Jy ! Component: 1950 - total flux cleaned = 0.000268578 Jy ! Component: 2000 - total flux cleaned = 0.000441823 Jy ! Total flux subtracted in 2048 components = 0.00044216 Jy ! Clean residual min=-0.002881 max=0.002493 Jy/beam ! Clean residual mean=-0.000017 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.217997 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 229 components and 0.217997 Jy ![Exited script file: muppet] wmap "J1345-3015_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 2.056 at 1.865 degrees (North through East) ! Clean map min=-0.0045604 max=0.082218 Jy/beam ! Writing clean map to FITS file: J1345-3015_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0822182 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000787839 device "J1345-3015_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1345-3015_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.87469 2.87469 5.74938 11.4988 22.9975 45.995 91.9901 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 2.056 at 1.865 degrees (North through East) ! Clean map min=-0.0045604 max=0.082218 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1345-3015_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1345-3015_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1345-3015_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:58:16 2007