! Started logfile: J1345-3015_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:51:26 2007 obs J1345-3015_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1345-3015_S_2002_01_31_yyk_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735435 visibilities/baseline/integration-bin. ! Found source: J1345-3015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 9796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1345-3015_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.522681 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=5.942 mas, bpa=1.365 degrees ! Estimated noise=1910.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.305813 Jy ! Component: 100 - total flux cleaned = 0.435387 Jy ! Total flux subtracted in 100 components = 0.435387 Jy ! Clean residual min=-0.025840 max=0.059605 Jy/beam ! Clean residual mean=0.000332 rms=0.010949 Jy/beam ! Combined flux in latest and established models = 0.435387 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.435387 Jy ! ! Correcting IF 1. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.268191Jy sigma=0.001873 ! Fit after self-cal, rms=0.267942Jy sigma=0.001871 ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=5.942 mas, bpa=1.366 degrees ! Estimated noise=1923.19 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=7.773 mas, bpa=-1.759 degrees ! Estimated noise=1035.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.137846 Jy ! Component: 100 - total flux cleaned = 0.191905 Jy ! Component: 150 - total flux cleaned = 0.213576 Jy ! Component: 200 - total flux cleaned = 0.2197 Jy ! Total flux subtracted in 200 components = 0.2197 Jy ! Clean residual min=-0.022506 max=0.063460 Jy/beam ! Clean residual mean=0.002188 rms=0.012802 Jy/beam ! Combined flux in latest and established models = 0.655087 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 61 components and 0.655087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223373Jy sigma=0.001517 ! Fit after self-cal, rms=0.223309Jy sigma=0.001517 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.144 x 7.773 at -1.759 degrees (North through East) ! Clean map min=-0.022435 max=0.34361 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.984628 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.16 HN 1.00* KP 0.85 ! LA 0.85 MK 1.02 NL 1.23 OV 1.14 ! PT 0.88 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.972252 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00* KP 1.00* ! LA 0.85 MK 1.11 NL 1.25 OV 1.16 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.939925 ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00 HN 1.00* KP 0.94 ! LA 0.87 MK 1.04 NL 1.49 OV 1.17 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.987055 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.91 HN 1.00* KP 1.01 ! LA 0.73 MK 1.07 NL 1.49 OV 1.04 ! PT 0.89 SC 0.91 ! ! ! Fit before self-cal, rms=0.223309Jy sigma=0.001517 ! Fit after self-cal, rms=0.210166Jy sigma=0.001372 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210166Jy sigma=0.001372 ! Fit after self-cal, rms=0.210441Jy sigma=0.001372 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.916 mas, bpa=0.09887 degrees ! Estimated noise=982.781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113596 Jy ! Component: 100 - total flux cleaned = 0.00878251 Jy ! Component: 150 - total flux cleaned = 0.00756004 Jy ! Component: 200 - total flux cleaned = 0.00614989 Jy ! Total flux subtracted in 200 components = 0.00614989 Jy ! Clean residual min=-0.012901 max=0.029827 Jy/beam ! Clean residual mean=0.000765 rms=0.006059 Jy/beam ! Combined flux in latest and established models = 0.661237 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 94 components and 0.661237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201493Jy sigma=0.001310 ! Fit after self-cal, rms=0.200669Jy sigma=0.001305 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200669Jy sigma=0.001305 ! Fit after self-cal, rms=0.198955Jy sigma=0.001294 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28, 54.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329147 Jy ! Component: 100 - total flux cleaned = 0.0374014 Jy ! Component: 150 - total flux cleaned = 0.0381784 Jy ! Component: 200 - total flux cleaned = 0.0388039 Jy ! Total flux subtracted in 200 components = 0.0388039 Jy ! Clean residual min=-0.014610 max=0.012370 Jy/beam ! Clean residual mean=0.000007 rms=0.004101 Jy/beam ! Combined flux in latest and established models = 0.700041 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 57 model components to the UV plane model. ! The established model now contains 146 components and 0.700041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194880Jy sigma=0.001258 ! Fit after self-cal, rms=0.194050Jy sigma=0.001252 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 7.916 at 0.09887 degrees (North through East) ! Clean map min=-0.014203 max=0.33941 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194050Jy sigma=0.001252 ! Fit after self-cal, rms=0.183976Jy sigma=0.001219 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183976Jy sigma=0.001219 ! Fit after self-cal, rms=0.183938Jy sigma=0.001218 ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=7.75 mas, bpa=0.2975 degrees ! Estimated noise=971.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175023 Jy ! Component: 100 - total flux cleaned = 0.0229574 Jy ! Component: 150 - total flux cleaned = 0.0240743 Jy ! Component: 200 - total flux cleaned = 0.0240687 Jy ! Total flux subtracted in 200 components = 0.0240687 Jy ! Clean residual min=-0.007250 max=0.008074 Jy/beam ! Clean residual mean=0.000114 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 0.724109 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 173 components and 0.72411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182278Jy sigma=0.001207 ! Fit after self-cal, rms=0.182087Jy sigma=0.001206 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182087Jy sigma=0.001206 ! Fit after self-cal, rms=0.180154Jy sigma=0.001200 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180154Jy sigma=0.001200 ! Fit after self-cal, rms=0.180154Jy sigma=0.001200 ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.697 mas, bpa=0.7678 degrees ! Estimated noise=971.137 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111698 Jy ! Component: 100 - total flux cleaned = 0.013659 Jy ! Component: 150 - total flux cleaned = 0.0143252 Jy ! Component: 200 - total flux cleaned = 0.0147169 Jy ! Total flux subtracted in 200 components = 0.0147169 Jy ! Clean residual min=-0.006525 max=0.008025 Jy/beam ! Clean residual mean=0.000142 rms=0.002204 Jy/beam ! Combined flux in latest and established models = 0.738826 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 192 components and 0.738827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179310Jy sigma=0.001195 ! Fit after self-cal, rms=0.179232Jy sigma=0.001194 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.5 mas, bmaj=22.85 mas, bpa=7.731 degrees ! Estimated noise=1237.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546141 Jy ! Component: 100 - total flux cleaned = 0.00649672 Jy ! Component: 150 - total flux cleaned = 0.00683565 Jy ! Component: 200 - total flux cleaned = 0.00713209 Jy ! Total flux subtracted in 200 components = 0.00713209 Jy ! Clean residual min=-0.006755 max=0.007708 Jy/beam ! Clean residual mean=0.000085 rms=0.002814 Jy/beam ! Combined flux in latest and established models = 0.745959 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 213 components and 0.745959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178999Jy sigma=0.001193 ! Fit after self-cal, rms=0.178960Jy sigma=0.001193 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=5.945 mas, bpa=2.667 degrees ! Estimated noise=1898.42 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.296137 Jy ! Component: 100 - total flux cleaned = 0.42029 Jy ! Component: 150 - total flux cleaned = 0.495578 Jy ! Component: 200 - total flux cleaned = 0.548705 Jy ! Total flux subtracted in 200 components = 0.548705 Jy ! Clean residual min=-0.017697 max=0.034605 Jy/beam ! Clean residual mean=0.000223 rms=0.006032 Jy/beam ! Combined flux in latest and established models = 0.548705 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 79 model components to the UV plane model. ! The established model now contains 79 components and 0.548705 Jy ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.697 mas, bpa=0.7678 degrees ! Estimated noise=971.137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0769882 Jy ! Component: 100 - total flux cleaned = 0.119673 Jy ! Component: 150 - total flux cleaned = 0.1458 Jy ! Component: 200 - total flux cleaned = 0.162591 Jy ! Total flux subtracted in 200 components = 0.162591 Jy ! Clean residual min=-0.009191 max=0.009487 Jy/beam ! Clean residual mean=0.000326 rms=0.003001 Jy/beam ! Combined flux in latest and established models = 0.711296 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 159 components and 0.711296 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.5 mas, bmaj=22.85 mas, bpa=7.731 degrees ! Estimated noise=1237.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.01777 Jy ! Component: 100 - total flux cleaned = 0.0273896 Jy ! Component: 150 - total flux cleaned = 0.0321855 Jy ! Component: 200 - total flux cleaned = 0.0333275 Jy ! Total flux subtracted in 200 components = 0.0333275 Jy ! Clean residual min=-0.006788 max=0.008207 Jy/beam ! Clean residual mean=0.000072 rms=0.002704 Jy/beam ! Combined flux in latest and established models = 0.744624 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 202 components and 0.744624 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.697 mas, bpa=0.7678 degrees ! Estimated noise=971.137 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00040625 Jy ! Component: 100 - total flux cleaned = -0.000597202 Jy ! Component: 150 - total flux cleaned = -0.000769199 Jy ! Component: 200 - total flux cleaned = -0.000924051 Jy ! Total flux subtracted in 200 components = -0.000924051 Jy ! Clean residual min=-0.006159 max=0.006343 Jy/beam ! Clean residual mean=0.000063 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 0.7437 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 234 components and 0.7437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178262Jy sigma=0.001190 ! Fit after self-cal, rms=0.178113Jy sigma=0.001189 wmodel J1345-3015_S_2002_01_31_yyk\_map.mod ! Writing 234 model components to file: J1345-3015_S_2002_01_31_yyk_map.mod wobs J1345-3015_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1345-3015_S_2002_01_31_yyk_uvs.fits wwins J1345-3015_S_2002_01_31_yyk\_map.win ! wwins: Wrote 4 windows to J1345-3015_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264943 Jy ! Component: 100 - total flux cleaned = 0.00440974 Jy ! Component: 150 - total flux cleaned = 0.00596533 Jy ! Component: 200 - total flux cleaned = 0.0074392 Jy ! Component: 250 - total flux cleaned = 0.00840419 Jy ! Component: 300 - total flux cleaned = 0.00924381 Jy ! Component: 350 - total flux cleaned = 0.00997376 Jy ! Component: 400 - total flux cleaned = 0.0102081 Jy ! Component: 450 - total flux cleaned = 0.0105112 Jy ! Component: 500 - total flux cleaned = 0.0106589 Jy ! Component: 550 - total flux cleaned = 0.0108041 Jy ! Component: 600 - total flux cleaned = 0.011016 Jy ! Component: 650 - total flux cleaned = 0.0112219 Jy ! Component: 700 - total flux cleaned = 0.0112879 Jy ! Component: 750 - total flux cleaned = 0.0113536 Jy ! Component: 800 - total flux cleaned = 0.0113545 Jy ! Component: 850 - total flux cleaned = 0.0114183 Jy ! Component: 900 - total flux cleaned = 0.01148 Jy ! Component: 950 - total flux cleaned = 0.0115401 Jy ! Component: 1000 - total flux cleaned = 0.0116573 Jy ! Component: 1050 - total flux cleaned = 0.011715 Jy ! Component: 1100 - total flux cleaned = 0.0117716 Jy ! Component: 1150 - total flux cleaned = 0.0119376 Jy ! Component: 1200 - total flux cleaned = 0.0119919 Jy ! Component: 1250 - total flux cleaned = 0.0119923 Jy ! Component: 1300 - total flux cleaned = 0.0121501 Jy ! Component: 1350 - total flux cleaned = 0.0122012 Jy ! Component: 1400 - total flux cleaned = 0.0122514 Jy ! Component: 1450 - total flux cleaned = 0.0121518 Jy ! Component: 1500 - total flux cleaned = 0.0122007 Jy ! Component: 1550 - total flux cleaned = 0.0121042 Jy ! Component: 1600 - total flux cleaned = 0.0119624 Jy ! Component: 1650 - total flux cleaned = 0.0118708 Jy ! Component: 1700 - total flux cleaned = 0.0119168 Jy ! Component: 1750 - total flux cleaned = 0.0117805 Jy ! Component: 1800 - total flux cleaned = 0.0116912 Jy ! Component: 1850 - total flux cleaned = 0.0116469 Jy ! Component: 1900 - total flux cleaned = 0.011516 Jy ! Component: 1950 - total flux cleaned = 0.0113882 Jy ! Component: 2000 - total flux cleaned = 0.0113033 Jy ! Total flux subtracted in 2048 components = 0.0112195 Jy ! Clean residual min=-0.003454 max=0.002755 Jy/beam ! Clean residual mean=-0.000119 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.75492 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 370 components and 0.75492 Jy ![Exited script file: muppet] wmap "J1345-3015_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.697 at 0.7678 degrees (North through East) ! Clean map min=-0.0050135 max=0.34649 Jy/beam ! Writing clean map to FITS file: J1345-3015_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.346493 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000863648 device "J1345-3015_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1345-3015_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.747762 0.747762 1.49552 2.99105 5.9821 11.9642 23.9284 47.8568 95.7135 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.346 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 7.697 at 0.7678 degrees (North through East) ! Clean map min=-0.0050135 max=0.34649 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1345-3015_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1345-3015_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1345-3015_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:51:34 2007