! Started logfile: J1330-3122_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:51:11 2007 obs J1330-3122_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1330-3122_X_2002_05_14_yyk_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.906306 visibilities/baseline/integration-bin. ! Found source: J1330-3122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 12072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1330-3122_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.359361 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6532 mas, bmaj=1.713 mas, bpa=-2.363 degrees ! Estimated noise=1636.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.218344 Jy ! Component: 100 - total flux cleaned = 0.298134 Jy ! Total flux subtracted in 100 components = 0.298134 Jy ! Clean residual min=-0.014572 max=0.031310 Jy/beam ! Clean residual mean=-0.000096 rms=0.004681 Jy/beam ! Combined flux in latest and established models = 0.298134 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.298134 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.216785Jy sigma=0.001377 ! Fit after self-cal, rms=0.215560Jy sigma=0.001374 ! Inverting map and beam ! Estimated beam: bmin=0.6532 mas, bmaj=1.713 mas, bpa=-2.363 degrees ! Estimated noise=1637.87 mJy/beam. ! Added new window around map position (-0.8, 1.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422614 Jy ! Component: 100 - total flux cleaned = 0.0667411 Jy ! Total flux subtracted in 100 components = 0.0667411 Jy ! Clean residual min=-0.010663 max=0.019516 Jy/beam ! Clean residual mean=-0.000026 rms=0.003200 Jy/beam ! Combined flux in latest and established models = 0.364875 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.364875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206782Jy sigma=0.001284 ! Fit after self-cal, rms=0.206554Jy sigma=0.001282 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8687 mas, bmaj=2.226 mas, bpa=-1.248 degrees ! Estimated noise=904.286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295773 Jy ! Component: 100 - total flux cleaned = 0.0405497 Jy ! Component: 150 - total flux cleaned = 0.0453943 Jy ! Component: 200 - total flux cleaned = 0.0474988 Jy ! Total flux subtracted in 200 components = 0.0474988 Jy ! Clean residual min=-0.008564 max=0.008787 Jy/beam ! Clean residual mean=0.000057 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.412374 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 64 components and 0.412374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204998Jy sigma=0.001260 ! Fit after self-cal, rms=0.204978Jy sigma=0.001260 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8687 x 2.226 at -1.248 degrees (North through East) ! Clean map min=-0.0080519 max=0.26392 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.980696 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.32 KP 0.89 ! LA 1.04 NL 1.06 OV 0.98 PT 1.00 ! SC 0.99 MK 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.991431 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.39 KP 0.88 ! LA 0.99 NL 1.03 OV 0.97 PT 1.03 ! SC 0.88 MK 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.973603 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 1.34 KP 0.90 ! LA 1.01 NL 1.00 OV 1.00 PT 1.05 ! SC 0.99 MK 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.952117 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 1.34 KP 0.98 ! LA 0.99 NL 1.04 OV 1.06 PT 1.16 ! SC 0.94 MK 1.04 ! ! ! Fit before self-cal, rms=0.204978Jy sigma=0.001260 ! Fit after self-cal, rms=0.214190Jy sigma=0.001246 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214190Jy sigma=0.001246 ! Fit after self-cal, rms=0.214209Jy sigma=0.001246 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8674 mas, bmaj=2.19 mas, bpa=0.2863 degrees ! Estimated noise=857.977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0142011 Jy ! Component: 100 - total flux cleaned = -0.0194497 Jy ! Component: 150 - total flux cleaned = -0.0210662 Jy ! Component: 200 - total flux cleaned = -0.0214586 Jy ! Total flux subtracted in 200 components = -0.0214586 Jy ! Clean residual min=-0.004331 max=0.004865 Jy/beam ! Clean residual mean=-0.000014 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.390915 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 77 components and 0.390915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213378Jy sigma=0.001240 ! Fit after self-cal, rms=0.213353Jy sigma=0.001240 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213353Jy sigma=0.001240 ! Fit after self-cal, rms=0.209164Jy sigma=0.001209 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000950689 Jy ! Component: 100 - total flux cleaned = 0.000958522 Jy ! Component: 150 - total flux cleaned = 0.000892501 Jy ! Component: 200 - total flux cleaned = 0.000768802 Jy ! Total flux subtracted in 200 components = 0.000768802 Jy ! Clean residual min=-0.004418 max=0.004621 Jy/beam ! Clean residual mean=-0.000013 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.391684 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.391684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209172Jy sigma=0.001209 ! Fit after self-cal, rms=0.208612Jy sigma=0.001205 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8674 x 2.19 at 0.2863 degrees (North through East) ! Clean map min=-0.0040421 max=0.2552 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208612Jy sigma=0.001205 ! Fit after self-cal, rms=0.516513Jy sigma=0.001193 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.516513Jy sigma=0.001193 ! Fit after self-cal, rms=0.516746Jy sigma=0.001192 ! Inverting map and beam ! Estimated beam: bmin=0.8638 mas, bmaj=2.178 mas, bpa=0.7845 degrees ! Estimated noise=851.71 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000959321 Jy ! Component: 100 - total flux cleaned = -0.000950334 Jy ! Component: 150 - total flux cleaned = -0.000946557 Jy ! Component: 200 - total flux cleaned = -0.00104676 Jy ! Total flux subtracted in 200 components = -0.00104676 Jy ! Clean residual min=-0.003932 max=0.003638 Jy/beam ! Clean residual mean=-0.000021 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.390637 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.390637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.516752Jy sigma=0.001192 ! Fit after self-cal, rms=0.516721Jy sigma=0.001192 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.516721Jy sigma=0.001192 ! Fit after self-cal, rms=0.568591Jy sigma=0.001189 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568591Jy sigma=0.001189 ! Fit after self-cal, rms=0.568680Jy sigma=0.001189 ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.177 mas, bpa=1.109 degrees ! Estimated noise=850.36 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062327 Jy ! Component: 100 - total flux cleaned = -0.00062009 Jy ! Component: 150 - total flux cleaned = -0.000664832 Jy ! Component: 200 - total flux cleaned = -0.000708725 Jy ! Total flux subtracted in 200 components = -0.000708725 Jy ! Clean residual min=-0.003759 max=0.003448 Jy/beam ! Clean residual mean=-0.000023 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.389928 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.389928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568674Jy sigma=0.001188 ! Fit after self-cal, rms=0.568743Jy sigma=0.001188 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=6.989 mas, bpa=4.011 degrees ! Estimated noise=1087.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648803 Jy ! Component: 100 - total flux cleaned = -0.000640514 Jy ! Component: 150 - total flux cleaned = -0.000637302 Jy ! Component: 200 - total flux cleaned = -0.000635654 Jy ! Total flux subtracted in 200 components = -0.000635654 Jy ! Clean residual min=-0.003538 max=0.003238 Jy/beam ! Clean residual mean=-0.000046 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.389293 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 90 components and 0.389293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568751Jy sigma=0.001188 ! Fit after self-cal, rms=0.568822Jy sigma=0.001188 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6525 mas, bmaj=1.672 mas, bpa=-1.07 degrees ! Estimated noise=1607.43 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.218877 Jy ! Component: 100 - total flux cleaned = 0.299209 Jy ! Component: 150 - total flux cleaned = 0.338555 Jy ! Component: 200 - total flux cleaned = 0.359283 Jy ! Total flux subtracted in 200 components = 0.359283 Jy ! Clean residual min=-0.007083 max=0.008962 Jy/beam ! Clean residual mean=-0.000040 rms=0.001959 Jy/beam ! Combined flux in latest and established models = 0.359284 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.359284 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.177 mas, bpa=1.109 degrees ! Estimated noise=850.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173982 Jy ! Component: 100 - total flux cleaned = 0.0242046 Jy ! Component: 150 - total flux cleaned = 0.0271666 Jy ! Component: 200 - total flux cleaned = 0.0280223 Jy ! Total flux subtracted in 200 components = 0.0280223 Jy ! Clean residual min=-0.003586 max=0.003441 Jy/beam ! Clean residual mean=-0.000029 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.387306 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.387306 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=6.989 mas, bpa=4.011 degrees ! Estimated noise=1087.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106511 Jy ! Component: 100 - total flux cleaned = 0.00106502 Jy ! Component: 150 - total flux cleaned = 0.00106651 Jy ! Component: 200 - total flux cleaned = 0.00108169 Jy ! Total flux subtracted in 200 components = 0.00108169 Jy ! Clean residual min=-0.003532 max=0.003197 Jy/beam ! Clean residual mean=-0.000050 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.388388 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.388388 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.177 mas, bpa=1.109 degrees ! Estimated noise=850.36 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194014 Jy ! Component: 100 - total flux cleaned = -0.000199268 Jy ! Component: 150 - total flux cleaned = -0.000137793 Jy ! Component: 200 - total flux cleaned = -0.000107354 Jy ! Total flux subtracted in 200 components = -0.000107354 Jy ! Clean residual min=-0.003528 max=0.003453 Jy/beam ! Clean residual mean=-0.000027 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.38828 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.38828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568842Jy sigma=0.001188 ! Fit after self-cal, rms=0.568862Jy sigma=0.001188 wmodel J1330-3122_X_2002_05_14_yyk\_map.mod ! Writing 69 model components to file: J1330-3122_X_2002_05_14_yyk_map.mod wobs J1330-3122_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1330-3122_X_2002_05_14_yyk_uvs.fits wwins J1330-3122_X_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J1330-3122_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464024 Jy ! Component: 100 - total flux cleaned = -0.000887234 Jy ! Component: 150 - total flux cleaned = -0.000886865 Jy ! Component: 200 - total flux cleaned = -0.000779616 Jy ! Component: 250 - total flux cleaned = -0.000519032 Jy ! Component: 300 - total flux cleaned = -0.000568662 Jy ! Component: 350 - total flux cleaned = -0.000374163 Jy ! Component: 400 - total flux cleaned = -0.000186804 Jy ! Component: 450 - total flux cleaned = -0.000141826 Jy ! Component: 500 - total flux cleaned = -0.000186465 Jy ! Component: 550 - total flux cleaned = -5.7459e-05 Jy ! Component: 600 - total flux cleaned = -5.70241e-05 Jy ! Component: 650 - total flux cleaned = 0.000189678 Jy ! Component: 700 - total flux cleaned = 0.000349689 Jy ! Component: 750 - total flux cleaned = 0.000428138 Jy ! Component: 800 - total flux cleaned = 0.000580626 Jy ! Component: 850 - total flux cleaned = 0.000691721 Jy ! Component: 900 - total flux cleaned = 0.00083954 Jy ! Component: 950 - total flux cleaned = 0.00109322 Jy ! Component: 1000 - total flux cleaned = 0.00134074 Jy ! Component: 1050 - total flux cleaned = 0.00141036 Jy ! Component: 1100 - total flux cleaned = 0.00158171 Jy ! Component: 1150 - total flux cleaned = 0.00185081 Jy ! Component: 1200 - total flux cleaned = 0.00201696 Jy ! Component: 1250 - total flux cleaned = 0.00221258 Jy ! Component: 1300 - total flux cleaned = 0.0023412 Jy ! Component: 1350 - total flux cleaned = 0.00246816 Jy ! Component: 1400 - total flux cleaned = 0.00259343 Jy ! Component: 1450 - total flux cleaned = 0.00277801 Jy ! Component: 1500 - total flux cleaned = 0.0028997 Jy ! Component: 1550 - total flux cleaned = 0.00319869 Jy ! Component: 1600 - total flux cleaned = 0.00337597 Jy ! Component: 1650 - total flux cleaned = 0.00360913 Jy ! Component: 1700 - total flux cleaned = 0.00392618 Jy ! Component: 1750 - total flux cleaned = 0.00415441 Jy ! Component: 1800 - total flux cleaned = 0.00432279 Jy ! Component: 1850 - total flux cleaned = 0.00451772 Jy ! Component: 1900 - total flux cleaned = 0.00470982 Jy ! Component: 1950 - total flux cleaned = 0.00487309 Jy ! Component: 2000 - total flux cleaned = 0.00500767 Jy ! Total flux subtracted in 2048 components = 0.00498127 Jy ! Clean residual min=-0.001629 max=0.001423 Jy/beam ! Clean residual mean=-0.000013 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.393262 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 212 components and 0.393262 Jy ![Exited script file: muppet] wmap "J1330-3122_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8622 x 2.177 at 1.109 degrees (North through East) ! Clean map min=-0.0024634 max=0.25787 Jy/beam ! Writing clean map to FITS file: J1330-3122_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.257866 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000491005 device "J1330-3122_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1330-3122_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.571231 0.571231 1.14246 2.28492 4.56985 9.1397 18.2794 36.5588 73.1176 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.257 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8622 x 2.177 at 1.109 degrees (North through East) ! Clean map min=-0.0024634 max=0.25787 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1330-3122_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1330-3122_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1330-3122_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:51:19 2007