! Started logfile: J1330-3122_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:50:48 2007 obs J1330-3122_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1330-3122_S_2002_01_31_yyk_uva.fits ! AN table 1: 77 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.723521 visibilities/baseline/integration-bin. ! Found source: J1330-3122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 10028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1330-3122_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.569866 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=6.003 mas, bpa=0.01344 degrees ! Estimated noise=1584.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.453164 Jy ! Component: 100 - total flux cleaned = 0.514679 Jy ! Total flux subtracted in 100 components = 0.514679 Jy ! Clean residual min=-0.018454 max=0.035619 Jy/beam ! Clean residual mean=0.000015 rms=0.005923 Jy/beam ! Combined flux in latest and established models = 0.514679 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.514679 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.202835Jy sigma=0.001343 ! Fit after self-cal, rms=0.202645Jy sigma=0.001342 ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=6.002 mas, bpa=0.01606 degrees ! Estimated noise=1584.93 mJy/beam. ! Added new window around map position (6, 2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368242 Jy ! Component: 100 - total flux cleaned = 0.0529973 Jy ! Total flux subtracted in 100 components = 0.0529973 Jy ! Clean residual min=-0.017549 max=0.026283 Jy/beam ! Clean residual mean=0.000001 rms=0.004694 Jy/beam ! Combined flux in latest and established models = 0.567677 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.567677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198946Jy sigma=0.001319 ! Fit after self-cal, rms=0.198067Jy sigma=0.001312 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=7.947 mas, bpa=-1.008 degrees ! Estimated noise=1035.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224187 Jy ! Component: 100 - total flux cleaned = 0.00125411 Jy ! Component: 150 - total flux cleaned = 0.000376238 Jy ! Component: 200 - total flux cleaned = -0.000156099 Jy ! Total flux subtracted in 200 components = -0.000156099 Jy ! Clean residual min=-0.011116 max=0.014115 Jy/beam ! Clean residual mean=0.000048 rms=0.003548 Jy/beam ! Combined flux in latest and established models = 0.567521 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.567521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197396Jy sigma=0.001307 ! Fit after self-cal, rms=0.197368Jy sigma=0.001307 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.2 x 7.947 at -1.008 degrees (North through East) ! Clean map min=-0.010853 max=0.50911 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00615 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.11 HN 1.00* KP 0.97 ! LA 0.96 MK 0.94 NL 1.04 OV 0.95 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993332 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.00* KP 1.00* ! LA 0.97 MK 1.05 NL 1.15 OV 0.99 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.960977 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.00* KP 1.03 ! LA 0.99 MK 1.02 NL 1.26 OV 0.99 ! PT 1.18 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0133 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.86 HN 1.00* KP 1.07 ! LA 0.82 MK 0.98 NL 1.25 OV 0.92 ! PT 1.00 SC 0.98 ! ! ! Fit before self-cal, rms=0.197368Jy sigma=0.001307 ! Fit after self-cal, rms=0.186250Jy sigma=0.001238 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186250Jy sigma=0.001238 ! Fit after self-cal, rms=0.186254Jy sigma=0.001238 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=7.924 mas, bpa=-0.6095 degrees ! Estimated noise=1025.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00918839 Jy ! Component: 100 - total flux cleaned = -0.0118958 Jy ! Component: 150 - total flux cleaned = -0.0124647 Jy ! Component: 200 - total flux cleaned = -0.0128691 Jy ! Total flux subtracted in 200 components = -0.0128691 Jy ! Clean residual min=-0.004978 max=0.005229 Jy/beam ! Clean residual mean=-0.000137 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.554652 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.554652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185828Jy sigma=0.001235 ! Fit after self-cal, rms=0.185767Jy sigma=0.001235 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185767Jy sigma=0.001235 ! Fit after self-cal, rms=0.181364Jy sigma=0.001207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015448 Jy ! Component: 100 - total flux cleaned = -0.00145992 Jy ! Component: 150 - total flux cleaned = -0.00146242 Jy ! Component: 200 - total flux cleaned = -0.00146374 Jy ! Total flux subtracted in 200 components = -0.00146374 Jy ! Clean residual min=-0.004609 max=0.005213 Jy/beam ! Clean residual mean=-0.000127 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.553188 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.553188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181284Jy sigma=0.001207 ! Fit after self-cal, rms=0.180669Jy sigma=0.001203 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.208 x 7.924 at -0.6095 degrees (North through East) ! Clean map min=-0.0060638 max=0.51263 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180669Jy sigma=0.001203 ! Fit after self-cal, rms=0.181411Jy sigma=0.001191 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181411Jy sigma=0.001191 ! Fit after self-cal, rms=0.181283Jy sigma=0.001190 ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=7.956 mas, bpa=-0.5008 degrees ! Estimated noise=1024.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231087 Jy ! Component: 100 - total flux cleaned = -0.00246678 Jy ! Component: 150 - total flux cleaned = -0.0026497 Jy ! Component: 200 - total flux cleaned = -0.00275277 Jy ! Total flux subtracted in 200 components = -0.00275277 Jy ! Clean residual min=-0.004088 max=0.004771 Jy/beam ! Clean residual mean=-0.000087 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.550435 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.550435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181222Jy sigma=0.001189 ! Fit after self-cal, rms=0.181170Jy sigma=0.001189 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181170Jy sigma=0.001189 ! Fit after self-cal, rms=0.180982Jy sigma=0.001185 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180982Jy sigma=0.001185 ! Fit after self-cal, rms=0.180969Jy sigma=0.001185 ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.964 mas, bpa=-0.4677 degrees ! Estimated noise=1024.37 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141197 Jy ! Component: 100 - total flux cleaned = -0.00145982 Jy ! Component: 150 - total flux cleaned = -0.00150954 Jy ! Component: 200 - total flux cleaned = -0.00155337 Jy ! Total flux subtracted in 200 components = -0.00155337 Jy ! Clean residual min=-0.003894 max=0.004813 Jy/beam ! Clean residual mean=-0.000082 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.548882 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.548882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180933Jy sigma=0.001185 ! Fit after self-cal, rms=0.180920Jy sigma=0.001185 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.21 mas, bmaj=23.37 mas, bpa=6.495 degrees ! Estimated noise=1296.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542265 Jy ! Component: 100 - total flux cleaned = -0.000699642 Jy ! Component: 150 - total flux cleaned = -0.00083005 Jy ! Component: 200 - total flux cleaned = -0.000906489 Jy ! Total flux subtracted in 200 components = -0.000906489 Jy ! Clean residual min=-0.003637 max=0.004987 Jy/beam ! Clean residual mean=-0.000135 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.547975 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 70 components and 0.547975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180928Jy sigma=0.001185 ! Fit after self-cal, rms=0.180923Jy sigma=0.001185 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.365 mas, bmaj=6.004 mas, bpa=0.1884 degrees ! Estimated noise=1577.29 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.45308 Jy ! Component: 100 - total flux cleaned = 0.516618 Jy ! Component: 150 - total flux cleaned = 0.537154 Jy ! Component: 200 - total flux cleaned = 0.546416 Jy ! Total flux subtracted in 200 components = 0.546416 Jy ! Clean residual min=-0.007289 max=0.006501 Jy/beam ! Clean residual mean=-0.000038 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.546416 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.546416 Jy ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.964 mas, bpa=-0.4677 degrees ! Estimated noise=1024.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333915 Jy ! Component: 100 - total flux cleaned = 0.00332799 Jy ! Component: 150 - total flux cleaned = 0.00322306 Jy ! Component: 200 - total flux cleaned = 0.00313086 Jy ! Total flux subtracted in 200 components = 0.00313086 Jy ! Clean residual min=-0.004098 max=0.004918 Jy/beam ! Clean residual mean=-0.000083 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.549547 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.549547 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.21 mas, bmaj=23.37 mas, bpa=6.495 degrees ! Estimated noise=1296.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000615142 Jy ! Component: 100 - total flux cleaned = -0.000848366 Jy ! Component: 150 - total flux cleaned = -0.00105268 Jy ! Component: 200 - total flux cleaned = -0.00116808 Jy ! Total flux subtracted in 200 components = -0.00116808 Jy ! Clean residual min=-0.003530 max=0.005393 Jy/beam ! Clean residual mean=-0.000137 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.548379 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.548379 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.964 mas, bpa=-0.4677 degrees ! Estimated noise=1024.37 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261725 Jy ! Component: 100 - total flux cleaned = 0.000531163 Jy ! Component: 150 - total flux cleaned = 0.000673159 Jy ! Component: 200 - total flux cleaned = 0.000792478 Jy ! Total flux subtracted in 200 components = 0.000792478 Jy ! Clean residual min=-0.003693 max=0.004816 Jy/beam ! Clean residual mean=-0.000081 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.549171 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.549171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180952Jy sigma=0.001185 ! Fit after self-cal, rms=0.180940Jy sigma=0.001185 wmodel J1330-3122_S_2002_01_31_yyk\_map.mod ! Writing 55 model components to file: J1330-3122_S_2002_01_31_yyk_map.mod wobs J1330-3122_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1330-3122_S_2002_01_31_yyk_uvs.fits wwins J1330-3122_S_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J1330-3122_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178216 Jy ! Component: 100 - total flux cleaned = 0.00240581 Jy ! Component: 150 - total flux cleaned = 0.00266088 Jy ! Component: 200 - total flux cleaned = 0.00271812 Jy ! Component: 250 - total flux cleaned = 0.00300019 Jy ! Component: 300 - total flux cleaned = 0.00326962 Jy ! Component: 350 - total flux cleaned = 0.00347642 Jy ! Component: 400 - total flux cleaned = 0.00357512 Jy ! Component: 450 - total flux cleaned = 0.00352755 Jy ! Component: 500 - total flux cleaned = 0.00371673 Jy ! Component: 550 - total flux cleaned = 0.00357879 Jy ! Component: 600 - total flux cleaned = 0.00366834 Jy ! Component: 650 - total flux cleaned = 0.00353807 Jy ! Component: 700 - total flux cleaned = 0.00345301 Jy ! Component: 750 - total flux cleaned = 0.00345307 Jy ! Component: 800 - total flux cleaned = 0.00341209 Jy ! Component: 850 - total flux cleaned = 0.00333192 Jy ! Component: 900 - total flux cleaned = 0.00329236 Jy ! Component: 950 - total flux cleaned = 0.00306132 Jy ! Component: 1000 - total flux cleaned = 0.00302367 Jy ! Component: 1050 - total flux cleaned = 0.00294862 Jy ! Component: 1100 - total flux cleaned = 0.00283809 Jy ! Component: 1150 - total flux cleaned = 0.00276573 Jy ! Component: 1200 - total flux cleaned = 0.00269434 Jy ! Component: 1250 - total flux cleaned = 0.00272912 Jy ! Component: 1300 - total flux cleaned = 0.00262518 Jy ! Component: 1350 - total flux cleaned = 0.00265862 Jy ! Component: 1400 - total flux cleaned = 0.00252508 Jy ! Component: 1450 - total flux cleaned = 0.0023929 Jy ! Component: 1500 - total flux cleaned = 0.00232806 Jy ! Component: 1550 - total flux cleaned = 0.00223178 Jy ! Component: 1600 - total flux cleaned = 0.00210489 Jy ! Component: 1650 - total flux cleaned = 0.00204225 Jy ! Component: 1700 - total flux cleaned = 0.00198008 Jy ! Component: 1750 - total flux cleaned = 0.00188842 Jy ! Component: 1800 - total flux cleaned = 0.00170706 Jy ! Component: 1850 - total flux cleaned = 0.00161733 Jy ! Component: 1900 - total flux cleaned = 0.00149899 Jy ! Component: 1950 - total flux cleaned = 0.0013529 Jy ! Component: 2000 - total flux cleaned = 0.00123761 Jy ! Total flux subtracted in 2048 components = 0.00109495 Jy ! Clean residual min=-0.001731 max=0.001971 Jy/beam ! Clean residual mean=-0.000056 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.550266 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 199 components and 0.550266 Jy ![Exited script file: muppet] wmap "J1330-3122_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 7.964 at -0.4677 degrees (North through East) ! Clean map min=-0.0028349 max=0.51818 Jy/beam ! Writing clean map to FITS file: J1330-3122_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.518181 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000585055 device "J1330-3122_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1330-3122_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.338716 0.338716 0.677433 1.35487 2.70973 5.41946 10.8389 21.6778 43.3557 86.7114 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.518 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 7.964 at -0.4677 degrees (North through East) ! Clean map min=-0.0028349 max=0.51818 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1330-3122_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1330-3122_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1330-3122_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:50:55 2007