! Started logfile: J1325-4301_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:50:19 2007 obs J1325-4301_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1325-4301_S_2002_05_14_yyk_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608889 visibilities/baseline/integration-bin. ! Found source: J1325-4301 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 3836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1325-4301_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.57028 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=6.357 mas, bpa=-0.0376 degrees ! Estimated noise=6170.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.726605 Jy ! Component: 100 - total flux cleaned = 1.25666 Jy ! Total flux subtracted in 100 components = 1.25666 Jy ! Clean residual min=-0.116108 max=0.226636 Jy/beam ! Clean residual mean=0.005247 rms=0.080261 Jy/beam ! Combined flux in latest and established models = 1.25666 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 76 model components to the UV plane model. ! The established model now contains 76 components and 1.25666 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010363Jy sigma=0.004385 ! Fit after self-cal, rms=1.009895Jy sigma=0.004383 ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=6.357 mas, bpa=-0.0376 degrees ! Estimated noise=6170.12 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=7.89 mas, bpa=-0.2862 degrees ! Estimated noise=2899.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.742284 Jy ! Component: 100 - total flux cleaned = 1.21508 Jy ! Component: 150 - total flux cleaned = 1.54009 Jy ! Component: 200 - total flux cleaned = 1.76641 Jy ! Total flux subtracted in 200 components = 1.76641 Jy ! Clean residual min=-0.075506 max=0.094804 Jy/beam ! Clean residual mean=0.004943 rms=0.043748 Jy/beam ! Combined flux in latest and established models = 3.02307 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 179 model components to the UV plane model. ! The established model now contains 253 components and 3.02307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.479343Jy sigma=0.001909 ! Fit after self-cal, rms=0.478233Jy sigma=0.001905 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.753 x 7.89 at -0.2862 degrees (North through East) ! Clean map min=-0.078931 max=0.43151 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.975538 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.91 ! LA 0.83 NL 1.30 OV 1.01 PT 1.00 ! SC 1.06 MK 1.09 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.972781 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.00* ! LA 0.82 NL 1.46 OV 1.10 PT 0.97 ! SC 0.96 MK 1.05 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.947493 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.00* KP 0.98 ! LA 0.85 NL 1.51 OV 1.09 PT 1.11 ! SC 1.10 MK 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.977066 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.00* KP 1.03 ! LA 0.71 NL 1.52 OV 0.95 PT 0.96 ! SC 1.01 MK 1.22 ! ! ! Fit before self-cal, rms=0.478233Jy sigma=0.001905 ! Fit after self-cal, rms=0.374001Jy sigma=0.001457 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374001Jy sigma=0.001457 ! Fit after self-cal, rms=0.373897Jy sigma=0.001456 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=8.179 mas, bpa=0.9033 degrees ! Estimated noise=2696.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0234613 Jy ! Component: 100 - total flux cleaned = -0.012641 Jy ! Component: 150 - total flux cleaned = -0.00844856 Jy ! Component: 200 - total flux cleaned = -0.0156526 Jy ! Total flux subtracted in 200 components = -0.0156526 Jy ! Clean residual min=-0.021663 max=0.021639 Jy/beam ! Clean residual mean=-0.001550 rms=0.011288 Jy/beam ! Combined flux in latest and established models = 3.00742 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 112 model components to the UV plane model. ! The established model now contains 361 components and 3.00742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354126Jy sigma=0.001317 ! Fit after self-cal, rms=0.353459Jy sigma=0.001314 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353459Jy sigma=0.001314 ! Fit after self-cal, rms=0.347179Jy sigma=0.001276 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00549822 Jy ! Component: 100 - total flux cleaned = -0.0110341 Jy ! Component: 150 - total flux cleaned = -0.0122143 Jy ! Component: 200 - total flux cleaned = -0.0110922 Jy ! Total flux subtracted in 200 components = -0.0110922 Jy ! Clean residual min=-0.013146 max=0.013257 Jy/beam ! Clean residual mean=-0.001015 rms=0.007269 Jy/beam ! Combined flux in latest and established models = 2.99632 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 109 model components to the UV plane model. ! The established model now contains 458 components and 2.99633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341342Jy sigma=0.001242 ! Fit after self-cal, rms=0.340412Jy sigma=0.001235 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.94 x 8.179 at 0.9033 degrees (North through East) ! Clean map min=-0.035198 max=0.34735 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340412Jy sigma=0.001235 ! Fit after self-cal, rms=0.333195Jy sigma=0.001218 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333195Jy sigma=0.001218 ! Fit after self-cal, rms=0.332992Jy sigma=0.001217 ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.09 mas, bpa=0.06865 degrees ! Estimated noise=2676 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141906 Jy ! Component: 100 - total flux cleaned = 0.0174507 Jy ! Component: 150 - total flux cleaned = 0.0210483 Jy ! Component: 200 - total flux cleaned = 0.0237452 Jy ! Total flux subtracted in 200 components = 0.0237452 Jy ! Clean residual min=-0.008067 max=0.008142 Jy/beam ! Clean residual mean=-0.000434 rms=0.004333 Jy/beam ! Combined flux in latest and established models = 3.02007 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 119 model components to the UV plane model. ! The established model now contains 566 components and 3.02007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330410Jy sigma=0.001203 ! Fit after self-cal, rms=0.330237Jy sigma=0.001201 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330237Jy sigma=0.001201 ! Fit after self-cal, rms=0.331775Jy sigma=0.001196 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331775Jy sigma=0.001196 ! Fit after self-cal, rms=0.331755Jy sigma=0.001196 ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=8.101 mas, bpa=0.05944 degrees ! Estimated noise=2679.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525903 Jy ! Component: 100 - total flux cleaned = 0.00699509 Jy ! Component: 150 - total flux cleaned = 0.00699122 Jy ! Component: 200 - total flux cleaned = 0.00881261 Jy ! Total flux subtracted in 200 components = 0.00881261 Jy ! Clean residual min=-0.005532 max=0.005550 Jy/beam ! Clean residual mean=-0.000321 rms=0.002975 Jy/beam ! Combined flux in latest and established models = 3.02888 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 94 model components to the UV plane model. ! The established model now contains 641 components and 3.02888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330332Jy sigma=0.001190 ! Fit after self-cal, rms=0.330294Jy sigma=0.001189 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.939 mas, bmaj=33.72 mas, bpa=4.185 degrees ! Estimated noise=3550.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474954 Jy ! Component: 100 - total flux cleaned = 0.0112904 Jy ! Component: 150 - total flux cleaned = 0.0149504 Jy ! Component: 200 - total flux cleaned = 0.0179369 Jy ! Total flux subtracted in 200 components = 0.0179369 Jy ! Clean residual min=-0.006086 max=0.006014 Jy/beam ! Clean residual mean=-0.000259 rms=0.003240 Jy/beam ! Combined flux in latest and established models = 3.04682 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 71 model components to the UV plane model. ! The established model now contains 693 components and 3.04682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329517Jy sigma=0.001186 ! Fit after self-cal, rms=0.329457Jy sigma=0.001186 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.344 mas, bmaj=6.356 mas, bpa=-0.1925 degrees ! Estimated noise=6042.02 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.697155 Jy ! Component: 100 - total flux cleaned = 1.18502 Jy ! Component: 150 - total flux cleaned = 1.5418 Jy ! Component: 200 - total flux cleaned = 1.80796 Jy ! Total flux subtracted in 200 components = 1.80796 Jy ! Clean residual min=-0.071734 max=0.115284 Jy/beam ! Clean residual mean=0.002368 rms=0.046012 Jy/beam ! Combined flux in latest and established models = 1.80796 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 133 model components to the UV plane model. ! The established model now contains 133 components and 1.80796 Jy ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=8.101 mas, bpa=0.05944 degrees ! Estimated noise=2679.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.414833 Jy ! Component: 100 - total flux cleaned = 0.670887 Jy ! Component: 150 - total flux cleaned = 0.834499 Jy ! Component: 200 - total flux cleaned = 0.913286 Jy ! Total flux subtracted in 200 components = 0.913286 Jy ! Clean residual min=-0.045103 max=0.045476 Jy/beam ! Clean residual mean=-0.000069 rms=0.024482 Jy/beam ! Combined flux in latest and established models = 2.72125 Jy ! Adding 171 model components to the UV plane model. ! The established model now contains 292 components and 2.72125 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.939 mas, bmaj=33.72 mas, bpa=4.185 degrees ! Estimated noise=3550.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0810813 Jy ! Component: 100 - total flux cleaned = 0.110472 Jy ! Component: 150 - total flux cleaned = 0.116036 Jy ! Component: 200 - total flux cleaned = 0.126138 Jy ! Total flux subtracted in 200 components = 0.126138 Jy ! Clean residual min=-0.029670 max=0.030569 Jy/beam ! Clean residual mean=0.000707 rms=0.017465 Jy/beam ! Combined flux in latest and established models = 2.84739 Jy ! Adding 125 model components to the UV plane model. ! The established model now contains 410 components and 2.84739 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=8.101 mas, bpa=0.05944 degrees ! Estimated noise=2679.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523889 Jy ! Component: 100 - total flux cleaned = 0.0101961 Jy ! Component: 150 - total flux cleaned = 0.0198733 Jy ! Component: 200 - total flux cleaned = 0.0300837 Jy ! Total flux subtracted in 200 components = 0.0300837 Jy ! Clean residual min=-0.010046 max=0.010091 Jy/beam ! Clean residual mean=0.000296 rms=0.005287 Jy/beam ! Combined flux in latest and established models = 2.87747 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 61 model components to the UV plane model. ! The established model now contains 470 components and 2.87747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333624Jy sigma=0.001202 ! Fit after self-cal, rms=0.333028Jy sigma=0.001200 wmodel J1325-4301_S_2002_05_14_yyk\_map.mod ! Writing 470 model components to file: J1325-4301_S_2002_05_14_yyk_map.mod wobs J1325-4301_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1325-4301_S_2002_05_14_yyk_uvs.fits wwins J1325-4301_S_2002_05_14_yyk\_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1325-4301_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.899 x 8.101 at 0.05944 degrees (North through East) ! Clean map min=-0.02871 max=0.40097 Jy/beam ! Writing clean map to FITS file: J1325-4301_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.400968 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00549108 device "J1325-4301_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1325-4301_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.10837 4.10837 8.21674 16.4335 32.867 65.7339 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0164 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.4 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.899 x 8.101 at 0.05944 degrees (North through East) ! Clean map min=-0.02871 max=0.40097 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1325-4301_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1325-4301_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1325-4301_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:50:25 2007